La Crosse Technology 926-25101-WGB Handleiding

La Crosse Technology Niet gecategoriseerd 926-25101-WGB

Lees hieronder de 📖 handleiding in het Nederlandse voor La Crosse Technology 926-25101-WGB (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 250 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

Page | 4

Temperature/Humidity Sensor Set

with Probe

Model: TX60U-IT

DC: 041318

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date

of purchase) on this product relating to manufacturing defects in materials &

workmanship. Before returning a product, please contact our friendly customer

support with questions or visit our online help:

Phone: 1-608-785-7920

Online Product Support and Registration:

https://www.lacrossetechnology.com/support/lacrossealertsmobile/

WARRANTY AND SUPPORT

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with any other antenna or transmitter.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modiﬁcations to

this equipment. Such changes or modiﬁcations could void the user authority to operate the equipment.

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this

transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be

co-located or operating in conjunction with any other antenna or transmitter

electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain

errors or misprints. The information it contains is regularly checked and corrections are included in subsequent editions.

We disclaim any responsibility for any technical error or printing error, or their consequences.

All trademarks and patents are recognized.

CONTENTS NOT INCLUDED

1. Sensor TX60U-IT

2. One Probe (wet, dry, or threaded)

3. Screws & anchors

4. GW1000-U gateway, power cord,

and LAN cable

• High speed INTERNET service

and router to connect gateway

• Mobile device with cellular

or WiFi service to use app

Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries.

App Store is a service mark of Apple Inc.

Google Play and the Google Play logo are trademarks of Google Inc.

Page | 2 Page | 3

SETUP

1. Connect gateway to router.

2. Insert power cord into outlet and into the

gateway.

3. Wait for 4 red blinks

4. Optional: Insert Probe into sensor.

5. Insert 2 AAA batteries into sensor.

Observe correct polarity.

6. Download La Crosse Alerts Mobile App.

7. Follow the on screen instructions.

AAA

GATEWAY LIGHTS

4 BLINKS: Ready to register

3 BLINKS: Cannot ﬁnd server

2 BLINKS: No IP address

1 BLINK: Check LAN cable

NO LIGHT: Check power cord

RED/GREEN LIGHTS BLINK:

Delete existing registration

SOLID RED: Registered

FACTORY RESET

Gateway:

1. Remove power cord

2. Hold gray button & insert power cord

3. Continue to hold until red light ﬂashes twice. Release button.

4. When light ﬂashes 4 times, register.

Sensor:

1. Hold gray button on sensor until sensor display resets.

• Do not mix old and new batteries.

• Do not mix Alkaline, Lithium, standard, or rechargeable batteries.

• Always purchase the correct size and grade of battery most suitable

for intended use;

• Clean the battery contacts and also those of the device prior to

battery installation;

• Ensure the batteries have with correct polarity (+ / -)

• Remove batteries from equipment that will not to be used for an

extended period.

• Promptly remove expired batteries.

CARE AND MAINTENANCE

• Temperature: -40ºF to 140ºF (-40ºC to 50ºC)

• Humidity: 3% RH to 99% RH

• Probe Temperature: -40ºF to 140ºF (-40ºC to 50ºC)

• Transmission: 200 ft. (60.96m) in open air

• Battery Requirements: Sensor: 2 “AAA” (LR3) battery (not included)

• Dimensions: 1.44” L x 0.76” W x 5.73” H (3.66 L x 1.93 W x 14.55 H cm)

System Requirements:

• iOS 8 or greater is required with a Safari browser

• Android 4.0.3 or greater is required with Chrome or Stock browser

Browser:

• Mac supported versions (min) OSX 10.8, 10.9 or 10.10 with Safari 6.1.1+,

Chrome 36+ or Firefox 39+

• Windows supported versions (min) 7/SP1, 8.1/Update 1, or 10 (Pro/Home)

with Chrome 36+, Firefox 39+ or Internet Explorer 10/11.

SPECIFICATIONS

Setup Video: www.lacrossetechnology.com/support/lacrossealertsmobile/

WARNING: This product can expose you to chemicals including

styrene, which is known in the State of California to cause cancer.

For more information go to: www.P65Warnings.ca.gov

Product specificaties

Merk:	La Crosse Technology
Categorie:	Niet gecategoriseerd
Model:	926-25101-WGB

Heb je hulp nodig?

Als je hulp nodig hebt met La Crosse Technology 926-25101-WGB stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd La Crosse Technology

La Crosse Technology TX141V4 Handleiding

5 Januari 2024

La Crosse Technology 724-1409 Handleiding

6 December 2023

La Crosse Technology TX145W Handleiding

9 Juli 2023

La Crosse Technology LTV-THP1-T1 Handleiding

7 Juli 2023

La Crosse Technology 616A-1908 Handleiding

17 Juni 2023

La Crosse Technology 308-1415FCTV2 Handleiding

15 Juni 2023

La Crosse Technology WS-6020U-IT Handleiding

14 Juni 2023

La Crosse Technology WS-9016U Handleiding

9 Juni 2023

La Crosse Technology TX151 Handleiding

9 Juni 2023

La Crosse Technology LTV-POOL Handleiding

5 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Protector AS-5030.3 V2 Handleiding

21 December 2024

Sabrent AU-MMCW Handleiding

21 December 2024

Sabrent AU-2X35 Handleiding

21 December 2024

Sabrent CB-RS232 Handleiding

21 December 2024

Owon 500W Handleiding

21 December 2024

Owon 300W Handleiding

21 December 2024

Sabrent SB-RKTQ4-1TB Handleiding

21 December 2024

Sabrent SB-RKTQ-1TB Handleiding

21 December 2024

Sabrent SB-ROCKET-1TB Handleiding

21 December 2024

Sabrent SB-HTSS Handleiding

21 December 2024