Konig KN-WS500N Handleiding

Konig Weerstations KN-WS500N

Lees hieronder de 📖 handleiding in het Nederlandse voor Konig KN-WS500N (126 pagina's) in de categorie Weerstations. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/126

KN-WS500N

MANUAL (p. 2)

ANLEITUNG (S. 7)

MODE D’EMPLOI (p. 12)

GEBRUIKSAANWIJZING (p. 17)

MANUALE (p. 22)

MANUAL DE USO (p. 27)

MANUAL (p. 32)

HASZNÁLATI ÚTMUTATÓ (o. 37)

KÄYTTÖOHJE (s. 42)

BRUKSANVISNING (s. 47)

NÁVOD K POUŽITÍ (s. 52)

MANUAL DE UTILIZARE (p. 57)

ΕΓΧΕΙΡΙΔΙΟ XPHΣHΣ (σελ. 62)

BRUGERVEJLEDNING (s. 67)

VEILEDNING (s. 72)

ИНСТРУКЦИЯ (77 стр.)

KILAVUZ (s. 82)

KASUTUSJUHEND (lk. 87)

NÁVOD (s. 92)

ROKASGRĀMATA (lpp. 97)

NAUDOJIMO VADOVAS (102 p.)

PRIRUČNIK (str. 107)

РЪКОВОДСТВО (p. 112)

INSTRUKCJA OBSŁUGI (str. 117)

PRIROČNIK (str. 122)

Weather Station

ENGLISH

Part I

This weather station has 7 dierent language options: English, German, French,

Italian, Spanish, Dutch and Danish.

The weather station has 6 dierent buttons: CH, ALERT, MAX/MIN, C/F, 12/24,

SNOOZE/LIGHT. These buttons are used for the following functions:

1. CH Button

The CH button is used to select channel 1, 2 or 3 while receiving the signal

from the transmitter. Please note that the selected channel must comply

with the selected channel on the transmitter. For example: if the transmitter

is set to channel 1, the weather station needs to be set to channel 1 as well.

2. ALERT Button

While in normal display mode, press this button to activate or deactivate

the temperature alert function. An arrow icon will appear to indicate the

function has been activated, or the arrow icon will disappear to indicate the

alarm is deactivated.

While in normal display mode, press and hold this button for 3 seconds to

enter the temperature alert settings. The indoor temperature digits will

start ashing; press the DOWN button at the rear to set the temperature

(0°C~50°C) at which the station has to sound an alarm.

3. MAX/MIN Button

Press this button to display the maximum temperature and humidity of

both indoors and outdoors.

Press again to display the minimum temperature and humidity of both

indoors and outdoors.

4. Set Alarm

Press ALARM button at the back to display the alarm time.

To set the alarm time, press ALARM time once, the alarm time displays, hold

the button for 3 seconds, alarm HOUR digit ashes, use UP or DOWN to set

the alarm hour.

Press the ALARM button again, the alarm MINUTE digit ashes, use UP or

DOWN to set the alarm minutes.

5. Activate/Deactivate the Alarm Function

Under Alarm Mode , press “ALARM” button at the rear to activate or

deactivate the alarm function. Alarm bell sign will appear or disappear

accordingly.

ENGLISH

6. C/F Button

Press the C/F button to switch the temperature display between C/F. Press

and hold button for 3 seconds to force the unit to enter the RCC reception.

7. 12/24 Hr Button

Press 12/24-hour button to toggle between 12/24-hour formats.

8. Use Snooze

When alarm activates, press SNOOZE to stop the alarm sound, alarm will

sound again after 5 minutes.

9. MOON PHASE

It will calculate the moon phase automatically according to the calculator,

the moon phase being divided into 8 degrees.

Temperature and Humidity:

1. Temperature range indoors: 0 °C~50 °C (32 °F~122 °F);

Temperature range outdoors: -50 °C~70 °C (-58 °F~158 °F).

2. Range of humidity: 20%–99%.

3. Tendency of temperature change: one check per hour, compared to

previous data. If the temperature changes more than 1 °C the arrow will be

at.

RCC Reception Mode:

1. RCC reception format: DCF, the reception time is about 10 minutes.

2. RCC reception way.

3. It will begin to receive the RCC 3 minutes after turning on the unit.

4. RCC reception graphic:

The tower graphic ashes when receiving, the tower graphic will also ash

when lost or no signal. The tower graphic will not ash when synchronizing

the signal, but the arc-shaped antenna symbol on top of the tower

graphic is ashing. The whole RCC reception graphic will display when the

reception is successful: The tower graphic will turn o and exit RCC when

the signal reception fails.

Part II

There are 7 buttons at the rear: LIGHT, CHANNEL, RESET, DOWN, UP, ALARM/

SET, TIME/SET. These buttons are used for the following functions:

1. LIGHT Button

In normal display mode press this button, the LED will light up.

Product specificaties

Merk:	Konig
Categorie:	Weerstations
Model:	KN-WS500N
Kleur van het product:	Wit
Ingebouwd display:	Ja
Diepte:	25 mm
Hoogte:	85 mm
Materiaal behuizing:	Kunststof
Stroombron:	Batterij/Accu
Accu/Batterij voltage:	4.5 V
Alarm functie:	Ja
Klok functie:	Ja
Meetfuncties:	Indoor hygrometer,Indoor thermometer,Outdoor hygrometer,Outdoor thermometer
Meetfuncties trend display:	Hygrometer,Thermometer
weerstation extremum data:	Hygrometer,Thermometer
Weersvoorspelling:	Ja
Receiver afmetingen (B x D x H):	95 x 26 x 63 mm
Batterijtechnologie:	Alkaline
Type batterij:	AAA
Aantal batterijen (receiver):	2
Vochtigheid meetbereik (buiten) (H-H):	20 - 99 procent
Temperature measurement range (outside) (T-T):	-50 - 70 °C
Aantal batterijen (sensor):	3
Meetfuncties grafisch display:	Ja
Luchtvochtigheidsmeetbereik (binnen) (HH):	20 - 99 procent
Temperature measurement range (inside) (T-T):	-50 - 70 °C