Konig KN-DIGICON20 Handleiding

Konig Mengpaneel KN-DIGICON20

Lees hieronder de 📖 handleiding in het Nederlandse voor Konig KN-DIGICON20 (4 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/4

KN-DIGICON20

DJ MIDI DIGITAL

CONTROLLER

A. MIDI CONTROL

ME701 is designed for playing computer based music tracks, and to work with devices that either

support MIDI feedback or not.

This is accomplished by the implementation of several different control modes within ME701.

The control modes are:

1. Special Midi Mode:

Once engaged, ME701 will respond to incoming MIDI message according to its assignment.

LEDs will not do anything unless controlled by an speciﬁ c application (E-MIX,PCDJ) via MIDI.

2. General Midi Mode:

In this mode, all MIDI feedback messages are ignored. A button‘s LED will light then fade away

when pressed.

The buttons, knobs, and sliders will transmit its assigned events to external device through USB

cable.

3. General Midi Mode with Response

Some DJ softwares are able to convey message to this unit to light up the LEDs, and allow this

unit to control the PC software.

PS. Please refer to the function description.

B. PC SOFTWARE SELECT

You can switch this unit to control different PC software.

1) Connect this unit to PC or laptop by USB cable, and then keep pressing the button ”LOAD

DECK A“ until the KILL LED in DECK A stands for the desired PC program mode is light.

• HI: This LED lights for SPECIAL MIDI MODE

• MID: This LED lights for GENERAL MIDI MODE

• LOW: This LED lights for GENERAL MIDI MODE WITH RESPONSE.

2) Press the corresponding knob which LED is light, until the LED is extinguished

3) Unplug the USB cable, and plug it again, then you can use this unit to control the selected

MIDI mode.

4) once the ME-701 is connected to computer, the LEDs are sparking in turn between Search ->

Scratch -> Sync.

• In “SPECIAL MIDI MODE”, it keep sparking to remind the user that PC software is not

activated.

• In General Midi Mode and General Midi Mode with Response, the sparking is keeping few

minutes only, then stop, and all LED lights up slightly.

Introduction:

De ri ck view :sc ption ba

1. USB port:

NOTE: The unit can not be power-on before the computer software (Emix) is activated

2. DC- in power for controller

Product specificaties

Merk:	Konig
Categorie:	Mengpaneel
Model:	KN-DIGICON20
Kleur van het product:	Zwart, zilver
Breedte:	375 mm
Diepte:	275 mm
Hoogte:	45 mm
Meegeleverde kabels:	USB
Snelstartgids:	Ja
Aantal USB 2.0-poorten:	1
Equalizer-instellingen:	Ja
Ondersteunt Windows:	Windows Vista Home Premium, Windows XP Home
Ondersteunt Mac-besturingssysteem:	Ja
Aantal kanalen:	2 kanalen
Digitaal geluid verwerken:	- Bit
Aantal jog wielen:	2