Khind FPC900 Handleiding

Khind Snijmachine FPC900

Lees hieronder de 📖 handleiding in het Nederlandse voor Khind FPC900 (12 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 25 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/12
Model / 型号 FPC900
Mini Chopper / / 迷你切碎机 Pemotong Mini
Instruction Manual / / 说明指示书 Buku Panduan
Important / / 重要 Mustahak
Please read this manual carefully before operating this product. Keep this manual handy for further reference.
请在使用此产品前,详读此说明书。并将之收藏以作日后参考。
Sila baca buku panduan ini dengan teliti sebelum menggunakan produk ini. Simpanlah
untuk rujukan masa depan.
P/N: 40-50775-00
This manual is also available online.
EN
2
Parts Identication
Specications
1Power Button
5Chopper Glass Cup
6Non-slip Pad
7Power Cord
3Cup Cover
* Pictures are for illustration purpose only.
* Specications are subject to change without prior notice.
2Motor Body
4Chopper Blade
Model
Voltage
Power
Gross Capacity
Rotational Speed
Rated Working Time
Rated Interval Time
Product Dimension (LxWxH)
Net Weight
FPC900
220-240V~ 50-60Hz
220W
0.6 Litres
17000r/min
<1min
>2min
118 x 118 x 236mm
1.3kg
:
:
:
:
:
:
:
:
:
1 7
2
6
5
4
3
EN
3
Caution
1. Read all instructions carefully before using.
2. Keep hands and utensils away from moving blades while processing food to reduce the risk of
severe injury to persons or damage to this appliance. A scraper may be used only when the
appliance is not running.
3. Blades are sharp. Be careful when handling the sharp cutting blades, emptying the Chopper
Glass Cup and during cleaning.
4. Always remove the Cutting Blade rst before removing the food stu inside the Chopper
Glass Cup.
5. Never attempt to deactivate the interlock microswitch.
6. Do not touch surfaces that may be hot.
7. To protect against electrical shock, do not immerse cord, plugs, Motor Body in water or other
liquids.
8. Unplug from mains when the appliance is not in use, before putting on or taking o parts,
and before cleaning. Allow appliance to cool before handing.
9. Do not use this appliance at outdoors. This appliance is intended for household use only. Do
not use the appliance for other than its intended use.
10. Do not let cord hang over edge of table or counter or touch hot surfaces.
11. Do not place on or near a hot gas or electric burner or in a heated oven.
12. Do not use without any load in the Chopper Glass Cup.
13. Never attempt to take food or liquid out from the Chopper Glass Cup when the blade is still
moving.
14. Do not overload the appliance with food at any time or use it for too long period of time.
This appliance is tted with a resettable thermal link to protect the motor from overheating.
Should the motor overheat, the thermal link will disconnect the power supply and will
automatically re-connect the power supply after the motor cools down.
15. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualied persons in order to avoid a hazard.
16. This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not play with the appliance.
17. Never leave the appliance unattended when it is switched on.
18. The water temperature should not over 60˚C when cleaning the appliance.
19. Do not switch on the appliance if it appears to be faulty in anyway. Please contact and send
to nearby Khind service center.

Product specificaties

Merk: Khind
Categorie: Snijmachine
Model: FPC900

Heb je hulp nodig?

Als je hulp nodig hebt met Khind FPC900 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Snijmachine Khind

Khind

Khind FPC900 Handleiding

6 Augustus 2024

Handleiding Snijmachine

Nieuwste handleidingen voor Snijmachine

Melissa

Melissa 16220009 Handleiding

6 September 2024
Graef

Graef S52200 Handleiding

5 September 2024
Cigweld

Cigweld COMET Handleiding

3 September 2024
RGV

RGV Luxury 25 Handleiding

29 Augustus 2024
Weston

Weston 36-3551-W Handleiding

26 Augustus 2024
Weston

Weston 36-3552-W Handleiding

26 Augustus 2024
Weston

Weston 36-3553-W Handleiding

26 Augustus 2024
RGV

RGV Desy AF 200 AM Handleiding

23 Augustus 2024
Maruyama

Maruyama MC-LB Handleiding

8 Augustus 2024
RGV

RGV Desy AF 275 AM Handleiding

7 Augustus 2024