Kathrein EXR 2508 Handleiding

Kathrein Digitale decoder EXR 2508

Lees hieronder de 📖 handleiding in het Nederlandse voor Kathrein EXR 2508 (5 pagina's) in de categorie Digitale decoder. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

1 / 8

Cascadable multi-switch for distribution of four satel-

lite levels and terrestrial signals across multiple

TV/Receiver

Only one downlink per TV/Receiver needed

(two for twin TV/Receiver)

Independent selection of horizontal/vertical, low/high,

for each TV/Receiver

Switchable via the coaxial cable with 14/18 V and

0/22 kHz signal frequency

Integral ampliﬁ er for low attenuation in satellite signal

band

Integral pre-emphasis to equalise cable attenuation

Terrestrial signals also receivable even when sat

TV/Receiver switched o

Terrestrial band: 5-862 MHz, passive

High degree of insulation between outputs

Multi-switches EXR 2558 and EXR 2554, together with

single-cable multi-switches of the EXD and EXE series

can be combined

Up to eight multi-switches can be cascaded

For indoor installation

EXR 2508

Multi-switches for eight ports with power supply unit

for LNB power feed

NCF 18

Low power consumption based on high-e ciency

short-circuit-proof switch-mode power supply unit

Kathrein Power-Saving:

The LNB power feed is switched o as soon as there

are no longer any TV/Receiver active on the EXR 2508

or in the cascade. This function can be deactivated,

for instance if loop-through multi-switches without

Kathrein Power-Saving as used in the cascade

LNB-Fernspeisung über den Eingang horizonal low.

Signalisierung Kathrein-Power-Saving über den Stamm

„vertikal low“. All other inputs are voltage-free

Sat-IF distribution system (4 x sat-IF)

Multi-switch

Features

EXR 2554 and EXR 2558

Loop-through multi-switch for system extension with

four or eight connections each

Kathrein Power-Saving:

As soon as there are no longer any TV/Receiver active,

a signal is generated at the last multi-switch via the

„vertical low“ trunk. This signal then switches the LNB

power supply o .

EXR 2508 20510095

EXR 2554 20510097

EXR 2558 20510096

2 / 8

Technical data

Type EXR 2508 EXR 2554 EXR 2558

Order no. 20510095 20510097 20510096

Subscriber connections 8 4 8

Inputs 1 x terr. 4 x sat-IF 1 x terr. 4 x sat-IF 1 x terr. 4 x sat-IF

Frequency ranges MHz 5-862 950-2150 5-862 950-2150 5-862 950-2150

Through loss dB - - 3,5

1,0 → 2,5 1)

3,5

1,0 → 2,5 1)

Connection loss ¹)dB 15 → 17 5 → 0 18 → 20 5 → 0 18 → 20 5 → 0

Horizontal/vertical isolation dB - 25 - 25 - 25

Subcriber decoupling dB 40 25 40 25 40 25

Trunk decoupling dB - - - 40 - 40

Max. output level 2) dBµV - 109 - 109 - 109

Vertical/holizontal input control V 12-14,5/16-19

Low/High band control kHz 0/22

Current consumption per subscriber mA 20

Nominal input voltage V 230 - -

Rated input voltage range V 198-253 - -

Nominal input power (800/150/0 mA load) W 18/4,7/1,7 - -

Input voltage on DC input 3) V - 18 -

Max. total remote feed current 3) mA 800 - -

Max. remote feed current per trunk mA - 1000 1000

Permissible ambient temperature °C - 20 to + 50

Connections F connectors

Dimensions (W x H x D) mm 215 x 148 x 43 112 x 148 x 44 159 x 148 x 43

Packing unit/weight pc./kg 1 (10)/0,65 1 (10)/0,35 1 (10)/0,45

¹)

Frequency-dependent attenuation

²) SAT to EN 60728-3, 35 dB IMA

³) Via horizontal low input

Kathrein Power Saving

If an EXR 2508 is operated as a stand-alone device or is operated in conjunction with other multi-switches which bear

the Kathrein Power-Saving logo, Kathrein Power-Saving can be activated when the stand-by switch is set to „ON“. If a TV/

Receiver is included in the cascade, the LNB is supplied from the last multi-switch.

Multi-switches without Kathrein Power-Saving do not generate any signal to the last multi-switch. In order to

ensure an uninterrupted power supply to the LNB, the stand-by switch must be set to „OFF“.

Please ﬁ nd the technical data from plug-in power supply unit NCF 18 on www.kathrein-ds.com.

3 / 8

Installation example (symbolic representation)

err.

high

low

Power

Saving

err.

high

low

Power

Saving

err.

high

low

18V

Power

OFF

Saving

err.

high

low

Power

Saving

ESD..

ESC..

ESD..

ESC..

KAZ 11/12

UAS

584

(585)

KA Z 12

21810002

KAZ 11

507205

err.

high

low

- 4dB

EBX 2520

err.

high

low

Power

Saving

3x EXR 2554

EXR 2558 | EXR 2508

Hereby, KATHREIN Digital Systems GmbH declares that the devices discribed in this document

are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the

following internet address: www.kathrein-ds.com

SIMPLIFIED EU DECLARATION OF CONFORMITY

Product specificaties

Merk:	Kathrein
Categorie:	Digitale decoder
Model:	EXR 2508
Kleur van het product:	Grijs
Gewicht:	650 g
Stroomvoorziening:	198 - 253V AC
Ondersteunde videoformaten:	Niet ondersteund
Plug and play:	Ja
Aansluitingen:	1 x terr., 4 x Sat-ZF, 8 x Sub.
Stroomverbruik:	20 mA
Afmetingen (B x D x H):	215 x 148 x 43 mm
Frequentie bereik:	47 - 862 MHz
Bedrijfstemperatuur (T-T):	-20 - 55 °C
RF-connector:	F
Video uitgang - analoog:	Ja