Joranalogue Enhance 2 Handleiding

Joranalogue Niet gecategoriseerd Enhance 2

Lees hieronder de 📖 handleiding in het Nederlandse voor Joranalogue Enhance 2 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 42 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

ENHANCE 2

STEREOPHONIC

ENHANCER

INTRODUC TIO N

Moving from mono to stereo sound: a logical

progression for any synthesist looking to expand

their sonic palette. Making use of two audio

channels, rather than just one, quite literally adds

another dimension to the capabilities of a

synthesiser.

Unfortunately, controlling stereo signals can be a

challenge within a modular system. This

realisation led to the development of Enhance 2:

a convenient - yet high fidelity tool for stereo

enhancement. It can be used to adjust balance,

width and spectral content, while also opening

up a world of mid/side processing; all under

voltage control and in just 8 HP.

The primary stereo parameters are balance

(moving the sound left right) and width or

(making it narrower or wider). The balance circuit

uses a true constant-power gain law, while the

width stage allows for seamless transitions from

pure mono to extra wide stereo.-

In addition, control is provided by a pair of tone

unique, wide- ranging mid/side voltage

controlled tilt filters with selectable corner

frequency. These make ‘cleaning up’ a muddy-

sounding mix straightforward, but also provide

unique binaural effects when modulated.

Mid/side processing encodes the stereo signals

into one containing only the mono material

(mid), and another containing the differences

between both channels (side). Apart from the

internal tilt filters, mid/side outputs also enable

external signal processing such as compression

or reverberation. An integrated mid/side decoder

returns the results back to standard stereo. And

at all times, a LED bar phase meter ensures that

phase correlation can be easily maintained.

S tereo field modulation, mid/side equalisation

and beyond; Enhance brings analogue 2 true

s tereo control to Eurorackthe world.

CONTENTS

In the Enhance 2 box, you’ll find:

 Product card, stating serial number and

production batch.

 16- - -to 10 pin Eurorack power cable.

 Mounting hardware: two black M3 x 6 mm

hex screws, two black nylon washers and a

hex key.

 T 2 he Enhance module itself protective , in a

cotton bag.

If any of these items are missing, please contact

your dealer or support@joranalogue.com.

ENHANCE 2

STEREOPHONIC

ENHANCER

CONTROL S & CONNECTIONS

1 PHASE CORRELATION METER

The phase correlation meter is used to gauge the

similarity of the left and right stereo output

channels. The correlation figure can range from

+1 (fully correlated, so no stereo content, only

mono), through 0 (no inter-channel correlation)

to −1 (the two channels are completely in anti-

phase).

A good stereo image is achieved with a

correlation factor between 0 and +1. Negative

correlation however, indicates a phase issue and

is to be avoided. In this case, sound would be lost

if the stereo channels were to be mixed into

mono (for example, loss of bass during playback

on a mono speaker or a subwoofer-equipped

sound system).

Note that at least 100 mVpp of signal is required

on both channels to ensure correct phase

readings.

2 BALANCE KNOB AND CV INPUT

Use the balance control to shift the stereo image

left or right.

The gains of both channels are controlled

according to a carefully tailored balance law. The

opposing channel will be attenuated when set to

either extreme position, while the selected

channel will be boosted by +3 dB to maintain

constant loudness. Set to the centre position,

both channels remain at unity gain.

This parameter can be voltage modulated using

the corresponding CV input. With the balance

knob centred, the stereo image will shift fully left

for a CV of −5 fully right at +5 V, or V.

ENHANCE 2

STEREOPHONIC

ENHANCER

3 WIDTH KNOB AND CV INPUT

The width knob adjusts the overall ‘stereoness’,

from 0 % (mono mix), through 100 % when set

centrally (no change to the stereo image), and

beyond up to 200 %.

The width CV input is used to modulate this

parameter at 20 %/V. You can achieve extremely

wide stereo sound this way, but keep an eye on

the phase correlation!

4 MID/SIDE TILT KNOBS, SWITCHES AND CV

INPUTS

Enhance 2 uses mid/side processing, a powerful

technique for sculpting stereo material. Two new

channels are derived from the stereo pair: the

mid channel contains only the centred material

that is common to left and right, while the side

channel isolates the stereo content which differs

between both sides. This makes for very intuitive

processing.

The tone of each of these channels can be easily

adjusted using the tilt filters. They smoothly

morph from a +6 dB bass boost and full treble

cut when set , to a full fully counter-clockwise

bass cut and +6 dB treble boost when set fully

clockwise. The centre positions are flat (unity

gain).

The corner frequency for each filter can be

toggled between bass (250 Hz) and treble (1 kHz)

using the range switches.

Modulate the tilt filters using the CV inputs.

Moving from flat to either extreme tilt requires a

5 V of CV.

5 STEREO INPUTS

Connect your pair of stereo source signals here.

The entire signal path is DC- coupled.

Mono signals can be processed using just the left

input socket, as there is normalisation to the

right. Keep in mind that in this case, due to the

lack of stereo content, only the balance and mid

tilt features will be functional.

6 MID/SIDE OUTPUTS

These are the mid/side outputs of the stereo

processor. You can use these for further mid/side

processing . using external modules

Keep in mind that for most stereo signals, the

mid signal will be much stronger, as there is

typically more mono than pure stereo material;

or in other words, a high phase correlation.

Both outputs are inverted with respect to the

input signals.

7 MID/SIDE INPUTS AND STEREO OUTPUTS

This mid/side decoder allows you to convert a

mid/side pair back to stereo. It is fully

independent from the stereo processor, except

for the normalisation from the processor’s

outputs to the decoder inputs.

This means that if you do not wish to perform any

additional mid/side processing, you can simply

use the module’s stereo inputs and outputs

directly. Otherwise, you can plug your processed

mid/side pair into this decoder and get standard

stereo outputs. External processing of only the

mid or the side channel is possible as well.

Note that the phase correlation meter uses the

decoder’s outputs stereo as its source pair. This

means that the meter will also take in account

any external mid/side processing that may

influence the phase correlation.

Also be aware that while Enhance 2’s entire

signal path is DC coupled, the meter will only

respond to audio frequencies. To complement

the module’s inverting mid/side outputs, this

decoder is inverting as well, restoring the proper

phase relationship of your stereo signals.

Product specificaties

Merk:	Joranalogue
Categorie:	Niet gecategoriseerd
Model:	Enhance 2

Heb je hulp nodig?

Als je hulp nodig hebt met Joranalogue Enhance 2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Joranalogue

Joranalogue Cycle 5 Handleiding

3 Juli 2024

Joranalogue Contour 1 Handleiding

29 Juni 2023

Joranalogue Route 4 Handleiding

21 Juni 2023

Joranalogue Generate 3 Handleiding

20 Juni 2023

Joranalogue Step 8 Handleiding

19 Juni 2023

Joranalogue Select 2 Handleiding

19 Juni 2023

Joranalogue Compare 2 Handleiding

16 Juni 2023

Joranalogue Orbit 3 Handleiding

15 Juni 2023

Joranalogue Enhance 2 Handleiding

15 Juni 2023

Joranalogue Morph 4 Handleiding

14 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024

Kramer K-Bar Camera Bracket Handleiding

26 November 2024

Kramer RK-19 Handleiding

26 November 2024

Kramer OSP-MM1 Handleiding

26 November 2024

Kramer ASPEN-1616UX Handleiding

26 November 2024

Korg Pitchstrap Handleiding

26 November 2024

NeoMounts WL70-450BL11 Handleiding

26 November 2024

Kramer CLS-AOCH/60 Handleiding

26 November 2024

Klauke EKM 6022ISM Handleiding

26 November 2024