Joranalogue Cycle 5 Handleiding

Joranalogue Niet gecategoriseerd Cycle 5

Lees hieronder de 📖 handleiding in het Nederlandse voor Joranalogue Cycle 5 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 30 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

CYCLE 5

VARI-

WAVE OSCILLATOR

INTRODUC TIO N

A small oscillator that packs a punch: that’s the

best way to summarise Cycle 5.

At its heart lies a refined high-stability triangle

core voltage controlled oscillator (VCO), with

performance matching or exceeding that of

much bigger and costly oscillator modules.

Instead of a coarse frequency knob, a 7-position

octave switch is provided. This in combination

with a perfect fifth transposition switch and

factory pitch tuning, makes Cycle 5 an

exceptionally straightforward and musical VCO

to use: simply centre the fine tune knob, and the

module will be instantly tuned to reference C.

Meanwhile, its dual precision volt per octave

inputs add a great deal of versatility. For example,

one could be used for pitch sequencing and the

other as a generic exponential FM input, or both

sequenced together for transposition effects—

the dual inputs serving -as a built in precision

adder.

Sporting all the classic waveforms, ranging from

sine wave, triangle, saw and square/saw, as well

as a hard sync input and low frequency oscillator

(LFO) mode, Cycle 5 makes for a real workhorse

VCO. The novel trigonometric waveshaper results

in a very clean sine wave, ideal for sub bass duty.

Cycle -5’s highlight however, is its vari wave

feature. By adjusting the vari-wave knob, the

waveform on the matching output will smoothly

morph from sine, to triangle, saw, square and

finally a very narrow pulse. The vari-wave

parameter can be CV controlled, up to audio

frequencies for some intense timbres.

Equally at home as a modest modulation

companion to big VCOs, as being in the spotlight

in miniature or polyphonic systems, Cycle 5

might just be the most multi talented tiny -

analogue oscillator yet.

CONTENTS

In the Cycle ’ll 5 box, you find:

 Product card, stating serial number and

production batch.

 16- -10-to pin Eurorack power cable.

 Mounting hardware: two black M3 x 6 mm

hex screws, two black nylon washers and a

hex key.

 T 5 he Cycle module itself, in a protective

cotton bag.

If any of these items are missing, please contact

your dealer or support@joranalogue.com.

CYCLE 5

VARI-

WAVE OSCILLATOR

SIGNAL FLOW

CONTROLS & CONNECTIONS

1 R SWITCH FREQUENCY ANGE

This switch determines over which frequency

range Cycle 5 will operate: low frequency

(VCLFO) or audio frequency (VCO).

2 OCTAVE SWITCH

The rotary octave switch sets the oscillation

frequency in octave steps: every time the knob is

advanced one position clockwise, the frequency

will be doubled.

In the audio frequency mode, the base

frequenc range ies from 2.1 C1 (33 Hz) to C7 ( )kHz ,

placing ‘middle C’ (C4) in the centre switch

position. Using the additional frequency controls,

the total range is A 27.5 A 7 ( . 0 ( Hz) to #/Bb 3.7 kHz)

Frequencies beyond this range be reached may

using external CV.

In low frequency mode, the total frequency

range without CV is 48 mHz (a period of 20

seconds) to 6.9 Hz.

3 FIFTH SWITCH

When switched down, the tritone switch adds 7

semitones to the current pitch. For example, C1

will be transposed up to G1, the interval between

them forming a perfect fifth.

CYCLE 5

VARI-

WAVE OSCILLATOR

4 F F K INE REQUENCY NOB

The fine frequency knob adds the ability to fine-

tune the pitch. It has a total range of 7 semitones.

Cycle 5 is tuned to C when this knob is centred

and the However, bfifth switch is disabled. y

using the fine knob and fifth switch in

conjunction, it can be set to play any pitch over

the entire frequency range.

5 - VARI WAVE KNOB AND LED

Cycle - 5’s unique vari wave (‘variable waveform’)

feature combines waveform morphing and

pulse-width modulation (PWM) into a single

parameter.

As the vari-wave knob is turned from minimum

to maximum, the waveform at the associated

output will smoothly morph from sine, to

triangle, to saw, to square, and finally to an

increasingly wide pulse, reaching a maximum

duty cycle of approximately 99 % ‘ ’ . Pips on the

knob’s scale denote the positions where these

basic waveforms are found.

The LED the realnext to the knob s show -time

output voltage at the vari -wave socket, lighting

up red for positive and blue for negative.

6 - VARI WAVE CV INPUT

The vari-wave function can be modulated via this

CV input. The total CV range is 5 V, meaning that

the basic waveforms are separated by 1.25 V

intervals.

Since the waveforms are distributed according

to their harmonic interrelationships, vari-wave

modulation can create timbres reminiscent of

both filtering and PWM.

Note that through the CV input, it is possible to

modulate the pulse waveform beyond the 99 %

point, resulting in silence.

7 V P O I S OLT ER CTAVE FM NPUT

These inputs are used to modulate the frequency

in an exponential fashion, with a standard 1 volt

per octave response, to create accurate pitches.

Both inputs can be used simultaneously, for

transposition effects or for combined pitch

sequencing and audio- rate FM.

8 I RESET NPUT

A rising edge on the reset input causes the

triangle core VCO to instantaneously go to 0 V,

affecting all outputs. Oscillation will then resume

as before.

This is known as ‘hard sync’, as the instantaneous

resets create high harmonic content. It is useful

when patching up an audio-rate FM oscillator

pair, as it synchronizes one oscillator’s frequency

with another, keeping the perceived pitch in

tune.

9 WAVEFORM OUTPUTS

All basic waveforms are available simultaneously

at a standard amplitude of 10 Vpp via these

output sockets: sine, triangle, saw and pulse.

These outputs wave are independent of the vari-

feature, except for the pulse, which will be

continuously modulated back and forth

between 50 (square wave) % and 99 -% pulse

width ( -near silence) - as the vari wave parameter

is adjusted. Each ‘pip’ on the vari wave knob -

scale corresponds to a 50 -% or 99 % pulse width

position.

The front panel graphics accurately depict the

phase relationships that exist between Cycle 5’s

multiple waveform outputs.

10 - VARI WAVE OUTPUT

The vari-wave output signal consists of a

combination of two basic waveforms, as

determined by the current value of the vari-wave

parameter.

Product specificaties

Merk:	Joranalogue
Categorie:	Niet gecategoriseerd
Model:	Cycle 5

Heb je hulp nodig?

Als je hulp nodig hebt met Joranalogue Cycle 5 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Joranalogue

Joranalogue Cycle 5 Handleiding

3 Juli 2024

Joranalogue Contour 1 Handleiding

29 Juni 2023

Joranalogue Route 4 Handleiding

21 Juni 2023

Joranalogue Generate 3 Handleiding

20 Juni 2023

Joranalogue Step 8 Handleiding

19 Juni 2023

Joranalogue Select 2 Handleiding

19 Juni 2023

Joranalogue Compare 2 Handleiding

16 Juni 2023

Joranalogue Orbit 3 Handleiding

15 Juni 2023

Joranalogue Enhance 2 Handleiding

15 Juni 2023

Joranalogue Morph 4 Handleiding

14 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Livarno Lux IAN 071407 Handleiding

29 November 2024

Livarno Lux IAN 317128 Handleiding

29 November 2024

Livarno Lux IAN 049213 Handleiding

29 November 2024

Livarno Lux ST-1002 Handleiding

29 November 2024

Livarno Lux HG02489 Handleiding

29 November 2024

Livarno Lux HG02189 Handleiding

29 November 2024

Livarno Lux IAN 365198 Handleiding

29 November 2024

Livarno Lux IAN 367074 Handleiding

29 November 2024

Livarno Lux HG00701 Handleiding

29 November 2024

Livarno Lux IAN 337273 Handleiding

29 November 2024