IOptron HEM15 Handleiding

IOptron Statief HEM15

Lees hieronder de 📖 handleiding in het Nederlandse voor IOptron HEM15 (6 pagina's) in de categorie Statief. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

Quick Start Guide

HEM15™ Hybrid Strain Wave GoTo Equatorial Mount

PACKAGE CONTENTS1

 Telescope mount HEM with or without iPolar15, TM electronic polar scope

 Hand controller (HC) Go2Nova®8409 with built-in WiFi –

 6P6C hand controller cable

 USB 2.0 cable

 AC adapter -240V, 12V 5A DC output (for indoor use only) –100

 Carrying case

 Oponal carbon ber tripod (#8061)

 Oponal external iGuider for autoguiding (#3360-HEM)

 Oponal counterweight sha P-SGP-CWS and counterweight 3006- ) (# ) (# 05

ONLINE RESOURCES www.iOptron.com ( )

 User’s Manual

 Hand controller and mount rmware upgrades (check online for the latest version)

 ASCOM drive, Commander, Commander Lite and other computer control

1Contents and design may change from me to me without noce.

Please hold the telescope when disengaging the DEC Gear Switch. HEM is operated under

unbalanced condions and could be pped o if the tripod is not secured.

1. Remove mount head from package:

2. Set up tripod: An HEM15 mount uses 3/8”-16

threaded hole for aachment. So a camera tripod or

other tripod with a 3/8”-16 mounng post can be

used. Shown here is an iOptron carbon ber tripod

#8061.

3. Aach mount head: Thread the mount head onto the

tripod head and secure it.

Level the mount by adjusng the tripod legs Use the .

built-in Bubble Level Indicator or an external level er

for this purpose.

4. Adjust latitude: Without any payload, slightly loosen

the 4x Latude Locking Screws. Use the Latude

Adjustment Knob to set the correct latude value, as

displayed in the Latude Mark Window.

Insert the Allen wrench into the Latude Adjustment

Knob for more turning torque.

Two latude ranges, 15~41° and 39~65°, can be set

up for the mount head. To change the latude range

from one to the other, both the Latude Posion Bolt

and the Latude Locking Screws need to be moved to

the correct locaons.

To switch the latude range:

 Loosen the Latude Locking Screws just enough

to adjust the latude seng to between 39～

41°. Tighten Latude Locking Screws.

Lat. Lock Screw

Lat. Mark

Lat. Adj. Knob

3/8”-16 mounting post

Lat. Mark

Wrench

 Unthread and pull out the Posion Bolt Remove .

and do not lose two black spacers/tubes Insert .

the Posion Bolt to a new latude posion with

one spacer on.

 Adjust the Latude Adjustment Knob while

holding the boom brass eyebolt unl it lines up

with the Posion Bolt. Insert another spacer and

secure the Latude Posion Bolt.

 Move the Latude Locking Screws (one on each

side) to the new locaons revealed.

5. Install telescope: An HEM mount accepts a Vixen 15

dovetail mounng plate.

Release the dovetail Saddle Locking Lever and slide

the telescope dove il plate into the saddle with Gear ta

Switch disengaged. Make sure that the arrow sign on

the saddle is poinng forward. Tighten the Saddle

Locking Lever.

Pull the lever and turn it to the posion that the lever

is parallel to the saddle or points towards the scope

to prevent it interfering with the DEC unit during

mount GOTO and tracking.

6. Balance payload: No RA balance is needed for an

HEM mount.

Turn the mount power on. Press number 9 to change

the slew speed to max. Press or buon to slew ◄ ►

the telescope to one side of the mount. Hold the

telescope and disengage DEC Gear Switch to check

the balance Release the dovetail saddle locking lever .

and move the scope back and forth to adjust the

posion. Tighten the dovetail saddle locking lever and

engage the gear switch aer balancing is completed.

Return the mount to Zero Posion aer balancing

and engage the DEC gear switch.

7. Set Zero Posion: Set Zero PosionThe command

registers the current posion as zero posion. So

before registering, the mount should be physically set

at Zero Posion either manually or slewed by hand

controller. The Zero Posion is dened as the

telescope being on top of the mount head and

poinng to the North Pole, with CW sha mounng

hole poinng to the ground. To register, press

MENU Zero Posion Set Zero Posion=> => . Press

ENTER to conrm. One can also use MENU=>Zero

Posion Search Zero Posion => to set the zero

Posion.

8. Set controller: MENU ess the Pr buon; then

“ ” “Sengs => Set Time & Site”.

Enter the current date. Enter the me zone oset to

the UTC; for examples:

 Boston is “UTC -300 minutes ”

 Los Angeles is “UTC -480 minutes ”

 Rome is “UTC +060 minutes ”

 Sydney is “UTC +600 minutes ”

Enter the longitude and latude coordinate of your

locaon in D:M:S format Toggle the Daylight Saving .

Time (DST) between N (No) and Y (Yes) using the

2022 05 05 12:01:36- -

UTC 300 Minute(s)-

W071d08m50s DST: Y

N42d30m32s Northern

Position Bolt

Eyebolt

Locking Lever

Product specificaties

Merk:	IOptron
Categorie:	Statief
Model:	HEM15

Heb je hulp nodig?

Als je hulp nodig hebt met IOptron HEM15 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Statief IOptron

IOptron HAE43C Handleiding

23 Augustus 2024

IOptron HAE43B Handleiding

21 Augustus 2024

IOptron HAE29B Handleiding

21 Augustus 2024

IOptron HEM44 Handleiding

17 Augustus 2024

IOptron HEM27 Handleiding

17 Augustus 2024

IOptron HEM27EC Handleiding

17 Augustus 2024

IOptron Tri-Pier 360 Handleiding

17 Augustus 2024

IOptron MiniPier Handleiding

17 Mei 2024

IOptron HEM15 Handleiding

17 Mei 2024

IOptron iMate HAE69B Handleiding

25 Maart 2024

Handleiding Statief

Nieuwste handleidingen voor Statief

Manfrotto MVR901ECEX Handleiding

6 September 2024

Manfrotto 562B-1 Handleiding

5 September 2024

E-Image EG01A2 Handleiding

5 September 2024

E-Image GH10 Handleiding

5 September 2024

E-Image GC752 Handleiding

5 September 2024

E-Image EG03A2 Handleiding

5 September 2024

E-Image GA752 Handleiding

5 September 2024

E-Image GH03 Handleiding

5 September 2024

E-Image GH06 Handleiding

5 September 2024

E-Image EG06A2 Handleiding

5 September 2024