IOptron HAE43B Handleiding

IOptron Statief HAE43B

Lees hieronder de 📖 handleiding in het Nederlandse voor IOptron HAE43B (6 pagina's) in de categorie Statief. Deze handleiding was nuttig voor 29 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/6
1
iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | support@ioptron.com | www.iOptron.com
Quick Start Guide
HAE Strain Wave Gear AZ/EQ GoTo Mount with iMateTM
Models: HAE29B/ , HAE43B/ , and HAE B/
EC EC 69 EC
PACKAGE CONTENTS1
Dual strain wave gear altazi/equatorial mount with built-in iMate computer
High precision opcal encoder on RA axle (for version)
EC
AC adapter -240V, 12V DC output for mount (for indoor use only) 100 6A
Carrying case
OPTIONAL PARTS (not included)
#8411 handset with OLED display
iPolarTM electronics polar scope (#3339)
Tripod/Tri-pier
External iGuider for autoguiding (#3360)
Counterweight sha P-SGP-CWS and counterweight (#3006-10) (# )
ONLINE RESOURCES www.iOptron.com ( )
User’s Manual
Hand controller and mount rmware upgrades (check online for the latest version)
Computer control
1Contents and design may change from me to me without noce. An HAE69C mount is used here for illustraon.
2
iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | support@ioptron.com | www.iOptron.com
HAE is operated under unbalanced condion and could be pped o if tripod is not secured.
1. Remove mount head from package.
2. Set up tripod: HAE69, as shown here, has a An
150mm base. An oponal LiteRoc tripod #8023ACC or
a tri-pier #8034 may be used. Setup and level the
tripod. Adjust the tripod height. Tighten tripod
locking knob to secure the tripod. Remove the
Alignment Peg from the mount base and thread it
onto the tripod head, on top of a tripod leg or
between two legs depending on the latude. Use two
outside threaded holes to secure the mount head.
3. Aach mount head: Retract the 2X Azimuth (Azi)
Adjustment Screws from both sides to leave ample
space for the alignment peg to be ed in between
the 2 Azi Adjustment Screws X .
Remove Azi Locking Screws from the mount altude
arm. Secure the mount head by ghtening the Azi
Locking Screws into the M8 holes on the tripod There .
is an Allen wrench stored on the mount base for
ghtening the screws.
Level the mount by adjusng the tripod legs Use the .
built-in Bubble Level Indicator on the mount base or
an external leveler for this purpose.
4. Adjust latude: The HAE69 has three latude range
sengs: ~34°, 28°~62° and 56°~90°. To adjust the
latude, loosen both the Primary and Auxiliary Alt.
Locking Lever on the RA base. An HAE29B or HAE43B
does not have the auxiliary locking lever.
Azi. Locking Screw
Allen wrench
Center Post
Azi. Adj. Screw
For HAE69
Alignment peg
Alignment peg
Azi. Locking Screw
3
iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | support@ioptron.com | www.iOptron.com
Use the Altude Adjustment Knob to move the
mount to the desired latude by aligning the scale to
the Latude Mark Line. Tighten both Primary and
Auxiliary Locking Lever.
There are holes on the tude Adjustment Knob. An Al
Allen wrench may be inserted for increased
adjustment torque, if needed.
To use the mount near the equator, change the
latude range sengs to 0 °. To use the mount at °~34
AA mode, change the range to 56 °. Please refer °~90
to on-line instrucon for detailed procedures.
5. Install telescope: An H B is equipped with a AE69
Vixen/Losmandy-D dual dovetail saddle. It accepts a
Vixen or a Losmandy-D dovetail mounng bar.
6. Install counterweight bar and CW: The mount is
designed to operate without a counterweight (CW). If
you want to use an optional CW, the CW sha
mounng hole is 3/8”-16 threaded. Thread in a CW
sha and install a 10 lbs CW.
7. Connect DC power and hand controller: Plug in a 12V
DC power supply to the socket on the base. DC12V IN
If you have an oponal Go2Nova® 8411 handset, plug
it into the port on the mount. HBX
Primary Alt..
Lock. Lever
Alt. Adj. Knob
Lat. Mark


Product specificaties

Merk: IOptron
Categorie: Statief
Model: HAE43B

Heb je hulp nodig?

Als je hulp nodig hebt met IOptron HAE43B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Statief IOptron

Handleiding Statief

Nieuwste handleidingen voor Statief