IOptron HAE43C Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor IOptron HAE43C (6 pagina's) in de categorie Statief. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
1
iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | support@ioptron.com | www.iOptron.com
Quick Start Guide
HAE Strain Wave Gear AZ/EQ GoTo Mount with iMateTM
Models: HAE29B/ , HAE43B/ , and HAE B/
EC EC 69 EC
PACKAGE CONTENTS1
Dual strain wave gear altazi/equatorial mount with built-in iMate computer
High precision opcal encoder on RA axle (for version)
EC
AC adapter -240V, 12V DC output for mount (for indoor use only) –100 6A
Carrying case
OPTIONAL PARTS (not included)
#8411 handset with OLED display
iPolarTM electronics polar scope (#3339)
Tripod/Tri-pier
External iGuider for autoguiding (#3360)
Counterweight sha P-SGP-CWS and counterweight (#3006-10) (# )
ONLINE RESOURCES www.iOptron.com ( )
User’s Manual
Hand controller and mount rmware upgrades (check online for the latest version)
Computer control
1Contents and design may change from me to me without noce. An HAE69C mount is used here for illustraon.
2
iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | support@ioptron.com | www.iOptron.com
HAE is operated under unbalanced condion and could be pped o if tripod is not secured.
1. Remove mount head from package.
2. Set up tripod: HAE69, as shown here, has a An
150mm base. An oponal LiteRoc tripod #8023ACC or
a tri-pier #8034 may be used. Setup and level the
tripod. Adjust the tripod height. Tighten tripod
locking knob to secure the tripod. Remove the
Alignment Peg from the mount base and thread it
onto the tripod head, on top of a tripod leg or
between two legs depending on the latude. Use two
outside threaded holes to secure the mount head.
3. Aach mount head: Retract the 2X Azimuth (Azi)
Adjustment Screws from both sides to leave ample
space for the alignment peg to be ed in between
the 2 Azi Adjustment Screws X .
Remove Azi Locking Screws from the mount altude
arm. Secure the mount head by ghtening the Azi
Locking Screws into the M8 holes on the tripod There .
is an Allen wrench stored on the mount base for
ghtening the screws.
Level the mount by adjusng the tripod legs Use the .
built-in Bubble Level Indicator on the mount base or
an external leveler for this purpose.
4. Adjust latude: The HAE69 has three latude range
sengs: 0°~34°, 28°~62° and 56°~90°. To adjust the
latude, loosen both the Primary and Auxiliary Alt.
Locking Lever on the RA base. An HAE29B or HAE43B
does not have the auxiliary locking lever.
Azi. Locking Screw
Allen wrench
Center Post
Azi. Adj. Screw
For HAE69
Alignment peg
Alignment peg
Azi. Locking Screw
3
iOptron Corp. | 6E Gill Street | Woburn, MA 01801 USA | (781) 569-0200 | support@ioptron.com | www.iOptron.com
Use the Altude Adjustment Knob to move the
mount to the desired latude by aligning the scale to
the Latude Mark Line. Tighten both Primary and
Auxiliary Locking Lever.
There are holes on the tude Adjustment Knob. An Al
Allen wrench may be inserted for increased
adjustment torque, if needed.
To use the mount near the equator, change the
latude range sengs to 0 °. To use the mount at °~34
AA mode, change the range to 56 °. Please refer °~90
to on-line instrucon for detailed procedures.
5. Install telescope: An H B is equipped with a AE69
Vixen/Losmandy-D dual dovetail saddle. It accepts a
Vixen or a Losmandy-D dovetail mounng bar.
6. Install counterweight bar and CW: The mount is
designed to operate without a counterweight (CW). If
you want to use an optional CW, the CW sha
mounng hole is 3/8”-16 threaded. Thread in a CW
sha and install a 10 lbs CW.
7. Connect DC power and hand controller: Plug in a 12V
DC power supply to the socket on the base. DC12V IN
If you have an oponal Go2Nova® 8411 handset, plug
it into the port on the mount. HBX
Primary Alt..
Lock. Lever
Alt. Adj. Knob
Auxiliary tAl .
Lock. Lever
Lat. Mark
Product specificaties
| Merk: | IOptron |
| Categorie: | Statief |
| Model: | HAE43C |
Heb je hulp nodig?
Als je hulp nodig hebt met IOptron HAE43C stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Statief IOptron
23 Augustus 2024
21 Augustus 2024
21 Augustus 2024
17 Augustus 2024
17 Augustus 2024
17 Augustus 2024
17 Augustus 2024
17 Mei 2024
17 Mei 2024
25 Maart 2024
Handleiding Statief
- Statief Braun
- Statief Sony
- Statief Aukey
- Statief Bresser
- Statief DJI
- Statief Dorr
- Statief Drift
- Statief Easypix
- Statief GoPro
- Statief Hama
- Statief Kodak
- Statief Kogan
- Statief Konig
- Statief Laserliner
- Statief Livoo
- Statief Neewer
- Statief Pyle
- Statief Ravelli
- Statief Revo
- Statief Rollei
- Statief Silvercrest
- Statief Sunpak
- Statief Trust
- Statief Vanguard
- Statief Velbon
- Statief Velleman
- Statief Vortex
- Statief Winegard
- Statief Barska
- Statief Miller
- Statief Celestron
- Statief Levenhuk
- Statief Kessler
- Statief Eurolite
- Statief ARRI
- Statief JOBY
- Statief Vello
- Statief Swarovski
- Statief Testo
- Statief Carson
- Statief Benro
- Statief Magnus
- Statief Manfrotto
- Statief Sachtler
- Statief Sevenoak
- Statief Zhiyun
- Statief AVerMedia
- Statief MOZA
- Statief Cullmann
- Statief Stalco
- Statief GVM
- Statief Marshall Electronics
- Statief Rode
- Statief Slik
- Statief Celly
- Statief Gitzo
- Statief Proaim
- Statief Konig & Meyer
- Statief Ultimate Support
- Statief Oben
- Statief Glide Gear
- Statief Camgear
- Statief Libec
- Statief Ulanzi
- Statief Flycam
- Statief Gravity
- Statief Sirui
- Statief Vinten
- Statief Acratech
- Statief ProMediaGear
- Statief Fidlock
- Statief Mantona
- Statief Olloclip
- Statief IFootage
- Statief SmallRig
- Statief FeiYu-Tech
- Statief FeiyuTech
- Statief Sky-Watcher
- Statief Hohem
- Statief MOVE'N SEE
- Statief On Air
- Statief Kaiser Fototechnik
- Statief Slidekamera
- Statief FLOWCINE
- Statief SteadiCam
- Statief Fat Gecko
- Statief 3 Legged Thing
- Statief FLM
- Statief Peak Design
- Statief Easyrig
- Statief Robus
- Statief Studio Assets
- Statief Square Jellyfish
- Statief Tiltall
- Statief E-Image
Nieuwste handleidingen voor Statief
6 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024
5 September 2024