Ices IFS-400 Handleiding

Ices Snijmachine IFS-400

Lees hieronder de 📖 handleiding in het Nederlandse voor Ices IFS-400 (28 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 96 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/28
1
IFS-400 - User Manual
KNOW YOUR FOOD SLICER
Your food slicer is suitable for cutting bread, all kinds of ham, meat, sausage, cheese and
vegetables, etc.
Main boay base
Thickness guide
Handle
Sliding meat table
Blade
Fixed-blade box
Slider
switch
Plug Power
(fig.1)
2
IMPORTANT SAFEGUARDS
When using electrical appliance, basic safety precautions should always be followed,
including the following:
1. Read all instruction before using slicer.
2. Close supervision is necessary when any appliance is used near children.
3. Switch off appliance first, unplug from outlet when not used, before putting on or taking
off parts, and before cleaning; Switch off appliance before approaching parts which
move in use.
4. Avoid contacting moving parts. Never feed food by hand. Always use completely
assembled slicer with sliding feed table and piece holder. The appliance must be used
with the sliding feed table and the piece holder in position unless this is not possible
duo to size or shape of the food.
5. To protect against any risk of electrical shock, do not put power unit in water or other
liquid.
6. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner. Return appliance to the place
of purchase for a replacement or repair free of charge.
7. The use of attachments not recommended or sold by the appliance manufacturer may
cause fire, electric shock or injury.
8. Do not use the appliance outdoors.
9. Do not let cord hang over edge of table or counter or touch hot surface.
10. Blade is sharp. Hold only by blade lock. Handle carefully when cleaning.
11. Do not use the appliance for other than its intended use.
PREPARING TO SLICE
1. Unwrap cord from bottom of slicer, and slide into slot. Position slicer on a clean, dry
and smooth surface .
2. Move the sliding feed table back and forth a few times to make sure movement.
3. Place the piece holder on back of the sliding feed table.
4. Select the required slice thickness by turning thickness adjusting knob, clockwise for
thinner slice and counter-clockwise for thicker slice. The range of thickness adjusting
is from 0 to 15mm.
Thickness Adjusting Knob
(fig.2)
3
OPERATION
CAUTION: ALWAYS USE FOOD PLATEAU SUPPORT AND FOOD PUSHER
1. Plug into AC 230V~ 50Hz outlet.
2. Place food to be sliced on the sliding feed table and press the piece holder against
thickness guide. Then pull the sliding feed table against the blade by hand.
3. The maximum size of food is:110x110x90(mm)(length x width x thick).
4. Switch on the appliance.
5. When the blade is rotating, push the sliding feed table toward blade. Move tray back
and forth steadily. Keep food gently pressed against guide for even slicer.
6. Do not operate the machine more than 5 minutes. The motor may be overheat. Turn
off switch & let it rest for at least 30 minutes to cool down the motor.
7. During slicing, if the rotational speed of blade reduces, let food unfreezes for a while,
then slice again.
8. When finishing slicing, unplug unit For safety and blade protection when storing, turn .
thickness adjusting knob to align thickness guide with blade.
CLEANING
UNPLUG SLICER FROM OUTLET
All slicing parts remove for thorough cleaning. Wash with a soft cloth or sponge and a mild
soap or a spray cleaner. Rinse and dry.
z Never use steel wool or scouring powder on any part of slicer. Do not wash any part
of slicer in dishwasher.
z Motor is concealed in housing. Never submerge water.
z Motor never needs oiling.
.
PIECE HOLDER:
Remove the piece holder from the sliding feed table.
SLIDING FEED TABLE:
Clean the sliding feed table after removing the piece holder.
STAINLESS BLADE:
Unplug the item ,loose the left-screw as the arrow direction .Then take off the blade
carefully with hand glove. After cleaning, tighten the blade with the left-screw on the
contrary direction.
Note: Always align thickness guide with blade for safety and blade protection
during storage.
NONSLIP FEET:
Clean with any grease-removing cleanser, such as alcohol or window cleaner.
STORAGE
z Align thickness guide with blade.
z Wrap cord in storage area on bottom of slicer.

Product specificaties

Merk: Ices
Categorie: Snijmachine
Model: IFS-400

Heb je hulp nodig?

Als je hulp nodig hebt met Ices IFS-400 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Snijmachine Ices

Ices

Ices IFS-300 Handleiding

30 Maart 2023
Ices

Ices IFS-400 Handleiding

11 November 2022

Handleiding Snijmachine

Nieuwste handleidingen voor Snijmachine

Livoo

Livoo MEN435 Handleiding

20 November 2024
Cecotec

Cecotec Rock'nCut Advance Handleiding

20 November 2024
Prowork

Prowork PFSG 180/1 Handleiding

19 November 2024
RGV

RGV Luxury Italia 275 S Handleiding

18 November 2024
RGV

RGV Luxury Italia 20 GL-R Handleiding

18 November 2024
RGV

RGV Luxury Italia 25 GL Handleiding

18 November 2024
RGV

RGV Luxury Italia 300 ES Handleiding

18 November 2024
RGV

RGV Luxury Italia 22 GL-R Handleiding

18 November 2024
RGV

RGV Ausonia 190 Handleiding

18 November 2024
RGV

RGV LUCY 20 GL Handleiding

18 November 2024