Honeywell RDWL515P2000 Handleiding

Honeywell Deurbel RDWL515P2000

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Honeywell RDWL515P2000 (28 pagina's) in de categorie Deurbel. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
RDWL515A2000
Read before installing
Installation and Operation Guide
Portable Wireless Doorbell
Preparation
Doorbell
Push
Button
Wall
Anchors
Round Head
Screws
Flat Head
Screws
Phillips Screwdriver
Standard Screwdriver
Drill and 1/4 in. (6 mm) drill bit
3 AA alkaline batteries
Doorbell Wall
Mounting Bracket
Push Button Mounting
Bracket
and Adhesive Pad
To install you will needIn the box you will find
The push button supplied with this kit is pre-programmed to operate with the doorbell.
If it is not, see β€œConnect a Push Button” on page 6.
CR2032
Battery
2
Overview
Just follow these simple steps:
1. Install batteries.
2. Set up the doorbell and your preferences.
3. Install the doorbell and the push button.
Safety
Before proceeding with the installation, please note the following safety
warnings:
β€’ Always follow the manufacturer’s advice when using power tools and wear
suitable protective equipment (e.g. safety goggles) when drilling holes, etc.
β€’ Before drilling holes in walls, check for hidden electricity cables and water
pipes. The use of a cable/pipe locator is advisable if in doubt.
Install Batteries
+
1. Open the doorbell battery
cover and install 3 AA alkaline
batteries.
2. Open the push button battery
cover and install the CR2032
battery.
Setup and Operation
Press the push button to test whether it is paired with the doorbell. The
doorbell will light up and ring. If it does not, see β€œConnect a Push Button” on
page 6.
Change the Tune
Press the Music button to change the
doorbell tune.
Every time you press the Music button,
the tune will change. Stop pressing the
Music button when you hear the tune
you want.
Ding Dong
Westminster
Piano
Fantasy
Soft Alert
Smart Sax
Glocken
Clock-ding-dong
Contemporary
3
Change the Light Pattern
Press the Sunlight button to change the lights that ξž₯ash
when the doorbell rings.
Press the Sunlight button
1 time 2 times 3 times 4 times
Halo light and
top lights
Halo light only Top lights only No lights
Change the Halo Light Color
Press the push button.
Within 12 seconds, press the
Sunlight button.
Every time you press the Sunlight
button, the halo light will change
colors. Stop pressing the Sunlight
button when you see the color you
want:
Light Blue
White
Red
Dark Blue
Green
Purple
Yellow
Operation
Adjust the Volume
Press the
Volume Up
or Volume
Down buttons
to adjust the
volume of the
Doorbell.


Product specificaties

Merk: Honeywell
Categorie: Deurbel
Model: RDWL515P2000

Heb je hulp nodig?

Als je hulp nodig hebt met Honeywell RDWL515P2000 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Deurbel Honeywell

Handleiding Deurbel

Nieuwste handleidingen voor Deurbel