Fredenstein F610 UE-1 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Fredenstein F610 UE-1 (21 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 32 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/21
F610
Universal Entzerrer
UE-1
Operating Manual
Fredenstein F610 Universal Entzerrer UE-1
The Fredenstein F610 Universal Entzerrer UE-1 is a digital controlled stereo analog quad band
equalizer and 30 band spectrum analyzer in a double wide 500 series cassette.
For the first time in a 500 series module, we were able to implement a high resolution 3.5” LCD
color display including a capacitive touch controller, thus welcoming the 500 Series to the 21st
century.
The four filters are all identical and each can be tuned from 20 Hz to 20 KHz. The encoder rotary
frequency knob allows access to about 190 different frequencies per filter, while the USB interface
allows for 1 Hz frequency resolution. The maximum filter gain is +/- 16 dB. In case more gain is
needed, additional filters can be set at the same frequency for a ridiculous up to 64 dB boost or cut.
The Q-factor of each filter can be varied from 0.4 to 7.9. The gain can be adjusted from -16 dB to
+16 dB in 0.25 dB steps, clearly fulfilling the demands of modern sophisticated mastering. The
Filter 1 characteristic can be changed from band-pass to low-shelf and Filter 4 to high-shelf.
In addition, a variable 2nd order low-cut filter with a range from 20 Hz to 975 Hz is provided as well
as a “Color” function giving a tube-like sound. The hard bypass allows for quick evaluation of the
eq'ed results.
The 30-band spectrum analyzer features a 60 dB dynamic range with select-able sensitivity from +6
dBu to + 24 dBu in 6 dB steps. The choice to feed either the input or the output signal to the
analyzer adds to the versatility of the F610.
Up to 99 complete settings can be stored in the internal non-volatile memory and a Micro-USB
interface provides complete control from a connected host computer via RS232 over USB.
The F610 UE-1 name is an homage to the classic K&H UE-100. “Entzerrer” is the German
technical term for equalizer.
Installation:
First, please power down your rack or box before inserting the F610 . The power
requirements are maximum +/-16V, +/-400mA. In case you don't use a Fredenstein Bento
6(D)S or Bento 10 (D)S, please make sure your box or rack can support the current. Bento 2 is
not compatible with the F610. Please consult your third party documentation in case of any
doubt. Don't forget to fasten the F610 securely to the rack with 4 rack screws.
The operating temperature of the F610 should stay below 60C / 140F. The temperature can the
displayed through the menu system (see Setup Menu section, page ). In case the temperature
reaches 60C /140F, please try to increase the airflow of your rack. A fan will kick in at 60C / 140F
to prevent overheating.
Fredenstein F610 Manual V1.1 Dec 28, 2017 Page 1
Fredenstein F610 Universal Entzerrer UE-1
Front View
The user interface of the F610 UE-1 consists of a 3.5 inch TFT LCD touch screen with a resolution
of 320 by 480 pixels. The touch screen is capacitive for superior precision and responsiveness.
In addition, three rotary encoder for gain, Q-factor, and filter frequencies provide a traditional user
interface for the most important parameters.
The Micro-USB connector is located at the lower right side of the LCD.
Fredenstein F610 Manual V1.1 Dec 28, 2017 Page 2


Product specificaties

Merk: Fredenstein
Categorie: Mengpaneel
Model: F610 UE-1

Heb je hulp nodig?

Als je hulp nodig hebt met Fredenstein F610 UE-1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Mengpaneel Fredenstein

Handleiding Mengpaneel

Nieuwste handleidingen voor Mengpaneel