FireAngel FA6615-R Handleiding

FireAngel Rookmelder FA6615-R

Lees hieronder de 📖 handleiding in het Nederlandse voor FireAngel FA6615-R (2 pagina's) in de categorie Rookmelder. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

FA6611, FA6615 & FA6620 OPTICAL SMOKE ALARM

& FA6720 HEAT ALARM - USER MANUAL

Optical smoke alarms FA6611, FA6615 and FA6620 are suitable for detecting slow smouldering res. Like other

smoke alarms, they can be subject to nuisance alarms from steam and should not be placed near bathrooms.

For the earliest warning, we recommend smoke and heat alarms are tted in all rooms where the temperature is

between 4°C and 38°C. Prolonged exposure to temperatures outside those stated above will reduce product life.

Heat alarm FA6720 is specied for ss A1 detection. Your heat alarm will sound a warning when the ambient Cla

temperature in a room is between 54°C and 65°C. For the best protection, heat alarms should always be installed as

part of a complete re protection system that includes smoke alarms.

Check with local building and re regulations for your property, to ensure compliance.

WARNING: Experience has shown that children may not be woken by re alarm tones. It is important that children are

never left alone in a house. Families should have a re escape plan that is rehearsed, so that everyone knows how to

escape when re occurs. The immediate priority when re occurs is to ensure that any sleeping children are woken

from sleep and are immediately taken to a place of safety outside the property, along with all other occupants. The

re and rescue service should always be called without delay, no matter how small the re.

Technical Support

Online: www.reangeltech.com/support

E-mail: technicalsupport@reangeltech.com

Phone: 0330 094 5830

Fire & Rescue Customers: 0800 141 2561

www.reangeltech.com

TEST YOUR ALARM

MONTHLY

Vanguard Centre,

Coventry CV4 7EZ, UK

Note: This user manual is also available in large text and other formats. Please email:

technicalsupport@reangeltech.com or call 0330 094 5830 for further information

Model FA6720

In which room should the alarm be installed?

Smoke alarms FA6611, FA6615 and FA6620 are

suitable for the landing, hallway, bedroom, living room

and dining room.

Heat alarm FA6720 is suitable for the kitchen, garage

and loft.

It is advisable to place an FA6611 Escape Light

Alarms in a corridor along the escape route to light

your path to safety.

Your smoke/heat alarm is suitable for use in mobile

homes and caravans. This smoke/heat alarm is not

intended for any non-residential, commercial or

industrial application, nor for any other purpose than

described.

Where in the room should the alarm be installed?

Smoke alarms should be sited at least 300mm from

light ttings and walls. Ideally as central as possible

in the room.

Smoke alarms should be positioned at no more than

600mm vertically below the highest point in the room.

If positioning your smoke alarm on the wall, the top of

the detection element must be between 150mm and

300mm below the ceiling, and at least 300mm from

any neighbouring wall.

Install your heat alarm at a distance no greater than

5.3m from the farthest wall, no greater than 5.3m from

a door to any room in which a re might start and no

greater than 5.3m from the next heat or smoke alarm.

Heat alarms should be sited at least 300mm from light

ttings and walls. Heat alarms should not be tted

on a wall.

Locations of alarms must be compliant with either

BS 5839: Part 6 or relevant Building Regulations if in

any doubt.

1. POSITIONING

2. INSTALLATION

Step 1:

FA6611 and FA6615 Replaceable battery

alarms only

If the alarm requires AA bat-

teries, remove the base plate

from the alarm by twisting it

anti-clockwise and insert the

batteries (matching + to +).

This will activate the alarm.

1. Drill holes into the ceiling (or wall)

using the template below and secure

the baseplate using the screws

provided.

NOTE: For FA6620 and FA6720, the alarm must

be installed on the baseplate to activate the

alarm. For FA6611 and FA6615, installing the

batteries activates the alarm.

After activation, the red LED on the front of

the alarm should ash once every 40 seconds

(approx.) to show that the alarm is active.

The alarm test sound pattern will be: 3 beeps

followed by a 1.5 second pause, then 3 beeps.

The LED will ash once per second.

2. Push and twist the alarm clockwise

onto the baseplate.

3. Press the Test / button.

The alarm will sound a reduced

alarm volume. The FA6611 will

also shine the escape light.

To hear the alarm at full volume*

double press the Test / button.

3. MAINTENANCE

1. Test the alarm monthly.

4. LOW BATTERY WARNING

5. FAULT INDICATION

1. If there is a fault, the alarm will

‘chirp’ twice and ash twice

every 40 seconds.

6. SILENCE FEATURE

In the event of a re, your alarm will sound 3 beeps continuously and the LED ash once per second.*

The FA6611 Escape Light Alarm will illuminate continuously.

7. SLEEP EASY™ FEATURE

If a low battery ‘chirp’ occurs at night, the alarm can be silenced so it

does not keep you from sleeping.

If your smoke/heat alarm does not

sound during testing:

• Check that your device is activated.

• If testing after rst installation, allow a few seconds for the alarm to settle.

• To hear the alarm at full volume double press the Test / button.

• If the alarm has been silenced and is in low sensitivity mode it may not

test. Wait 15 minutes then try again.

• If the alarm is FA6611 or FA6615, replace the battery.

If your smoke/heat alarm activates

in the event of a known false alarm:

• Check the location of your device.

• Clean the alarm.

If your smoke/heat alarm sounds

unusual or ‘chirps’ intermittently:

• Check the location of your device.

• Clean the alarm.

• Check that your device is denitely the source of the chirping; make sure

the noise isn’t coming from another alarm.

If you experience frequent

unwanted alarms:

• Check the location of your device.

• Clean the alarm.

If a fault or End of Life is indicated

:• Replace the alarm immediately.

If the light on the FA6611 fails to

illuminate:

• Check if the device is still within its warranty. If so, contact Technical

Support, otherwise, replace the alarm immediately.

TROUBLESHOOTING GUIDE

FireAngel Safety Technology Limited. Email: (UK) technicalsupport@reangeltech.com,

(DE) technik@reangeltech.com, (FR) supporttechnique@reangeltech.com, (NL) klantenservice@reangeltech.com,

(INT) Internationalsupport@reangeltech.com

WARRANTY & DISPOSAL

FireAngel Safety Technology Limited warrants to the original purchaser that its enclosed smoke or heat alarm be free from defects

in materials and workmanship under normal residential use and service for a period of 5 (ve) years from the date of purchase (not

including FA6611 or FA6615 replaceable batteries). Provided product is sent back to FireAngel Safety Technology Limited with proof

and date of purchase, FireAngel Safety Technology Limited hereby warrants that during the 5 (ve) year period commencing from the

date of purchase FireAngel Safety Technology Limited, at its discretion, agrees to replace the unit free of charge. The warranty on any

replacement FA6611, FA6615, FA6620 or FA6720 alarm, will last for the remainder of the period of the original warranty in respect of

the alarm originally purchased – that is from the date of original purchase and not from the date of receipt of the replacement product.

FireAngel Safety Technology Limited reserves the right to offer an alternative product similar to that being replaced if the original model

is no longer available or in stock. This warranty applies to the original retail purchaser from the date of original retail purchase and is not

transferable. Proof of purchase is required.

This warranty does not cover damage resulting from accident, misuse, disassembly, abuse or lack of reasonable care of the product, or

applications not in accordance with the user manual. It does not cover events and conditions outside of FireAngel Safety Technology

Limited’s control, such as Acts of God (re, severe weather etc.). It does not apply to retail stores, service centres or any distributors or

agents. FireAngel Safety Technology Limited will not recognise any changes to this warranty by third parties.

FireAngel Safety Technology Limited shall not be liable for any incidental or consequential damages caused by the breach of any

expressed or implied warranty. Except to the extent prohibited by applicable law, any implied warranty of merchantability or tness for a

particular purpose is limited in duration for 5 (ve) years.

This warranty does not affect your statutory rights. Except for death or personal injury, FireAngel Safety Technology Limited shall not be

liable for any loss of use, damage, cost or expense relating to this product or for any indirect, or consequential loss, damages or costs

incurred by you or any other user of this product.

DISPOSAL

Waste electrical products should not be disposed of with your other household waste. The alarm is ideally suited for disposal

within the waste electronic and electrical equipment (WEEE) recycling scheme.

Please recycle where facilities exist. Check with your local authority, retailer or contact our Technical Support team for recycling/

disposal advice as regional variations apply. Replaceable batteries should be removed before disposal of the detector. Both

batteries and the detector should be disposed of in line with current regulations.

Do not attempt to open. Do not burn.

2. Vacuum your alarm every 3 months. Do not use cleaners or solvents.3.

4. 5. Do not paint the alarm. Replace the alarm every 10 years. Do not use any other test

method except the process

described in this manual.

Do not tamper with the alarm

as this could cause electric

shock or malfunction.

When the alarm battery is low, the alarm will ‘chirp’ and the Red

operational LED will ash once every 40 seconds.

2. If the alarm is still within

warranty, contact

Technical Support.

1. Press the Test / The alarm will silence for 10 minutes button 2.

and the red LED will continue to ash.

Smoke alarms can react to cooking fumes or other non emergency situations. Your alarm features ‘Silence’

technology. In the event of a known false alarm you can temporarily silence it by pressing the Test /

button. The LED will continue to ash once every second to show that it is in Silence mode. Your alarm will

automatically return to full sensitivity after 10 minutes.

NEVER IGNORE ANY ALARM. If an alarm is sounding, it is warning you of a potentially hazardous situation. Do

not ignore it. Ignoring the alarm may result in injury or death. If your smoke or heat alarm activates and you are

not absolutely certain of the source of re, get everyone out of the house immediately.

* NOTE: For FA6720 Heat Alarms, after sounding for 30 minutes the audible alarm signal will increase the

pause between alerts (by approx.12 seconds) in order to save power. The LED will continue to ash once

every second.

2. The alarm will silence for 8 hours and

the red LED will continue to ash.

3. TAKE ACTION to replace the alarm

or batteries THE NEXT DAY (see Low

Battery Warning section)

Take action as soon as possible to ensure protection in case of re. Your alarm will still detect smoke (or heat)

during the Sleep Easy mode but you must replace the alarm or batteries within 30 days.

• If your alarm is an FA6611 or FA6615 and is signalling low batteries, replace the batteries as soon as

possible. Once the batteries have been replaced, the Sleep Easy feature will be disabled for 30 days.

• If your alarm is an FA6620 or FA6720 replace the alarm. If the device is still within warranty, contact our

Technical Support team.

NOTE: You can silence a low battery ‘chirp’ a maximum of 10 times. YOUR ALARM CANNOT BE SILENCED IF

IT INDICATES A FAULT OR END OF LIFE (see ‘Fault Indication’).

1. For FA6611 and FA6615 Replaceable Battery Alarms

2. For FA6620 and FA6720 Sealed Battery Alarms

FA6611 or FA6615 alarms require 2 x AA batteries. Under normal use, the battery should last approximately three years

for FA6611 and ve years for FA6615. Use of a battery other than those recommended here may have a detrimental effect

on the alarm: Duracell AA MN1500 Alkaline, GP AA GN15A Alkaline, Energizer AA L91 Lithium.

SMOKE ALARMS FA6611, FA6615 & FA6620

HEAT ALARM FA6720

Step 2:

Baseplate Installation - all alarms: FA6611, FA6615,

FA6620 and FA6720

300mm 600mm

150mm

300m

5300mm

5300mm 5300mm

Batch number:

x x x x x x x x x x x x -

Install date:

x x x x x x x x / /

For Technical Support reference, please write the alarm batch number and install date below:

1116

EN14604:2005

+AC:2008

Smoke alarm devices

FSTDOP21006

GN5914R4

1. Press the Test / button.

3. If your alarm is no longer under

warranty, replace immediately.

Residents can

test the alarm

by pressing

the central

Test /

button.

System Status Indicators: If there is a fault your alarm will display the following fault indication patterns.

Audible pattern LED pattern Action required

Low battery 1 beep/40 seconds 1 ash/40 seconds FA6611, FA6615: Replace the batteries

FA6620, FA6720: Replace alarm within 30 days

Fault 1 double beep/40

seconds

1 double ash/40 seconds May not signal alert - replace alarm immediately

End of Life 1 triple beep/40 seconds 1 triple ash/40 seconds May not signal alert - replace alarm immediately

*85dB at 3m

300mm 300mm

91.5mm

2. Replace the

battery

immediately

(within 30

days).

3. Always test

the alarm

after

replacing

the batteries.

1. Carefully turn

the alarm

anti-clockwise

to remove the

device from

the baseplate.

2. Replace the

alarm

immediately *

(within 30

days).

* If your alarm

is still under

warranty,

contact

Technical

Support.

1. Carefully turn

the alarm anti-

clockwise to

remove the device

from the baseplate.

0832

EN14604:2005

+AC:2008

Smoke alarm devices

FSTDOP21007

KM 694292

BS 5446-2:2003

Models FA6611, FA6615 & FA6620

Product specificaties

Merk:	FireAngel
Categorie:	Rookmelder
Model:	FA6615-R

Heb je hulp nodig?

Als je hulp nodig hebt met FireAngel FA6615-R stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Rookmelder FireAngel

FireAngel W2-Module Handleiding

15 November 2024

FireAngel ST-630-DE Handleiding

15 November 2024

FireAngel HW10 Handleiding

12 Maart 2024

FireAngel SW1-R Handleiding

16 November 2023

FireAngel FP2620W2-R Handleiding

16 November 2023

FireAngel FP1720W2-R Handleiding

16 November 2023

FireAngel ST-750 Handleiding

16 November 2023

FireAngel SB1-T Handleiding

16 November 2023

FireAngel SW1-PF-T Handleiding

15 November 2023

FireAngel FA6720 Handleiding

15 November 2023

Handleiding Rookmelder

Nieuwste handleidingen voor Rookmelder

Cordes CC-4100 Handleiding

18 November 2024

Cordes CC-3000 Handleiding

18 November 2024

Cordes CC-500 Handleiding

18 November 2024

Nexa KD-134A Handleiding

18 November 2024

Gloria R-5 Handleiding

16 November 2024

Kidde 29HD Handleiding

16 November 2024

Ei Electronics Ei650iW Handleiding

15 November 2024

Kidde 3SFWR Handleiding

24 September 2024

Kidde KF30R Handleiding

24 September 2024

Kidde P4010ACS-WCA Handleiding

24 September 2024