EMOS P5723 Handleiding

EMOS Deurbel P5723

Lees hieronder de 📖 handleiding in het Nederlandse voor EMOS P5723 (38 pagina's) in de categorie Deurbel. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/38

3402107000_31-P5723_00_01_WEB 105 × 148 mm

P5723 | 98098

GB Wireless Doorchime

CZ Bezdrátový zvonek

SK Bezdrôtový zvonček

PL Dzwonek bezprzewodowy

HU Vezeték nélküli csengő

SI Brezžični zvonec

RS|HR|BA|ME Bežično zvono

DE Drahtlose Klingel

UA Бездротовий дзвоник

RO|MD Sonerie fără r

LT Belaidis durų skambutis

LV Bezvadu durvju zvans

EE Juhtmeta uksekell

BG Безжичен звънец

FR Carillon sans l

IT Campanello senza li

ES Timbre inalámbrico

NL Draadloze deurbel

www.emos.eu

GB | Wireless Doorchime

The set includes a push button (transmitter) and a home doorchime (receiver).

A transmission between the button and the door chime is performed by radio waves at frequency

of 433.92 MHz. Transmission range depends on local conditions and can be up to 100 m in an open

space without interference.

For a correct use of the wireless door chime, read the user manual carefully.

Specications

Transmission range: up to 100 m in open area (in built-up area may drop to fth)

Pairing of the door chime and the push button: “self-learning” function

Pairing capacity: max 8 buttons

Optical signalization of ringing on push button

Number of melodies: 36 melodies

Transmission Frequency: 433.92 MHz, 10 mW e.r.p. max.

Power of door chime unit: 3× 1.5 V AA

Power of pushbutton: Battery 1× 3 V (CR2032)

Included parts: double-sided adhesive tape, 2 screws

Description of the door chime and the buttons:

see Fig. 1

A – melody selection

B – battery compartment

see Fig. 2

1 – replacing of a battery inthe push button

2 – installation of the button

COMMISSIONING

Push button of the door chime (transmitter)

1. Using a screwdriver remove the back cover through the hole onthe side of the button. Insert 3 V

battery in to the button. Pay attention to the polarity of the inserted battery.

2. Attach the back cover that serves as a holder on a wall with two screws. It can also be attached

using double-sided adhesive tape. Check if the set operates reliably at a chosen place before instal-

lation. It is advisable to choose a protected position of the button, e.g. placing it in an embrasure.

3. Assemble the button by putting the front part on the back cover and snap it.

4. Write your name on the label under the transparent cover. Remove the cover by slight pulling.

Note: The push button of the door chime (transmitter) can be easily placed on wood or brick walls.

Never place the button directly on metal objects or materials that contain metal such as plastic con-

struction of windows and doors that contain metal frame. The transmitter may not function properly.

1 2

CR2032

Pairing of the push button and the door chime

1. Insert 3× 1.5 V AA batteries into the door chime, hear a melody, the door chime is ready forpair-

ing. Do not mix together old and new or dierent types of batteries (Alkaline, carbon-zinc and

nickel-cadmium), do not use rechargeable batteries!

2. Press the push button on the button (transmitter), hear a melody, the devices will be matched.

3. For pairing of other buttons, repeat step 2.

4. Pushbuttons can be matched within 30 seconds after inserting the battery.

5. If you want to pair another buttons later, follow step 1 and 2.

6. This allows you to progressively pair up to 8 buttons.

Erasing the memory of paired buttons

1. Remove the rear part of the push button cover.

2. Set the chime to the pairing mode – depending from the door chime type, remove the battery

and reinsert ordisconnect the chime from the 230 V socket and reconnect.

3. Within 30 seconds push the S2 button on the rear of the push button (transmitter).

4. A melody will sound – the memory of all matched buttons will be erased.

Melody choice

Using a suitable thin (not sharp) object such as a pencil, press the button A repeatedly.

Each time you will hear a dierent melody – the last played melody will be set.

The change of the melody can be done at any time when the doorbell is charged.

Note: The transmission range (max. 100 m) is inuenced by local conditions such as number of walls

through which the signal must pass through, metal door frames and other elements that aect

the transmission of radio signals (presence of other radio devices operating at a similar frequency,

e.g. wireless thermometers, door drivers etc.). The transmission range can rapidly decrease under

inuence of these factors.

Troubleshooting

The door chime does not ring

• Door chime may be outside its range.

• Adjust the distance between the push button and the home door chime; the range can be

aected by local conditions.

• Batteries in the push button can be discharged.

• Replace the battery paying attention to the polarity of the inserted battery.

• Door chime has no power.

Care and Maintenance

Wireless digital door chime is a sensitive electronic device therefore take the following precautions:

• Door chime (receiver) is designed for an indoor use in dry areas.

• Door chime must be located in an easily accessible area for easy handling and disconnection.

• Occasionally check the function of the door chime and change the battery. Use only a high quality

alkaline battery withprescribed parameters.

• If you do not use the door chime for a long time, remove the battery from the push button.

• Do not expose the push button and the door chime to excessive vibrations and shocks.

• Do not expose the push button and the door chime to excessive heat and direct sunlight or moisture.

• Use a soft, damp cloth with a little of detergent for cleaning, do not use aggressive cleaning

agents or solvents.

This device is not intended for use by a person (including children) whom a reduced physical, sense or

mental inability or a lack of experience and knowledge inhibits from a safe use of the device, if they

are not supervised or have not been instructed about the use of the device by a person responsible

for their safety. It is necessary to supervise children to ensure that they do not play with the device.

Do not dispose with domestic waste. Use special collection points for sorted waste. Contact

local authorities for information about collection points. If the electronic devices would be

disposed on landll, dangerous substances may reach groundwater and subsequently food

chain, where it could aect human health.

Product specificaties

Merk:	EMOS
Categorie:	Deurbel
Model:	P5723

Heb je hulp nodig?

Als je hulp nodig hebt met EMOS P5723 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Deurbel EMOS

EMOS P5712 Handleiding

16 November 2024

EMOS P57002 Handleiding

28 Juni 2023

EMOS P57001 Handleiding

21 Juni 2023

EMOS P5723 Handleiding

9 Mei 2023

EMOS P5734B Handleiding

8 Mei 2023

EMOS P5763 Handleiding

5 Mei 2023

EMOS P5750 Handleiding

3 Mei 2023

EMOS P5763R Handleiding

30 April 2023

EMOS P5732T Handleiding

29 April 2023

EMOS P5732 Handleiding

26 April 2023

Handleiding Deurbel

Nieuwste handleidingen voor Deurbel

Vimar ELVOX K40965 Handleiding

16 November 2024

Friedland Evo D3200 Handleiding

15 November 2024

Ring Battery Doorbell Handleiding

12 November 2024

Elektrobock BZ33-MP3 Handleiding

20 Oktober 2024

Eufy Video Doorbell C30 Handleiding

30 September 2024

Cata THALASSA PRO 90 GGR Handleiding

27 Augustus 2024

Cata CK 6000 X Handleiding

27 Augustus 2024

Cata THALASSA 600 GWH Handleiding

27 Augustus 2024

Cata THALASSA PRO 700 GBK Handleiding

27 Augustus 2024

Cata THALASSA PRO 800 GBK Handleiding

27 Augustus 2024