EMOS P5712 Handleiding

EMOS Deurbel P5712

Lees hieronder de 📖 handleiding in het Nederlandse voor EMOS P5712 (52 pagina's) in de categorie Deurbel. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/52

3402012000_31-P5712_00_01_WEB 105 × 148 mm

www.emos.euwww.emos.eu

P5712

GB Wireless Doorchime

CZ Bezdrátový zvonek

SK Bezdrôtový zvonček

PL Dzwonek bezprzewodowy

HU Vezeték nélküli csengő

SI Brezžični zvonec

RS|HR|BA|ME Bežično zvono

DE Drahtlose Klingel

UA Бездротовий дзвоник

RO|MD Sonerie fără r

LT Belaidis durų skambutis

LV Bezvadu durvju zvans

EE Juhtmeta uksekell

BG Безжичен звънец

FR Sonnette sans fil

IT Campanello senza fil

ES Timbre inalámbrico

NL Draadloze deurbel

2×

GB | Wireless Doorchime

The set consists of a doorbell button (transmitter) and a chime (receiver). The chime is designed for

permanent placement in a room or can be used as a portable „pager“. Transmission between the

button and the chime is carried by 433.92 MHz radio waves. Range depends on local conditions and

reaches up to 100 m in open spaces without interference. For proper usage of the wireless doorchime,

read the instruction manual thoroughly.

Specications

Range: up to 100 m in an open area (can drop down to up to one fth in a busy area)

Pairing the chime with buttons: self-learning function

Pairing capacity: max. 8 buttons

Number of ringtones: 16

Ringtone volume: adjustable in 4 levels

Three dierent modes: audio signalisation only; light signalisation only; light and audio signalisation

Water-resistant button (transmitter) with IP44 enclosure

Working frequency: 433.92 MHz, 10 mW e.r.p.max

Button power supply: 1× 3 V (CR2032) battery

Chime power supply: 3× 1.5 V (AA) batteries

Chime Description (see Fig. 1)

1 – speaker

2 – ringtone change button

3 – bell LED

4 – ringing signalisation setting button

5 – volume setting button

6 – battery compartment

7 – hole for hanging

Button Description (see Fig. 2)

1 – ring button/button LED

2 – hole for opening the battery cover

3 – battery compartment CR2032 – battery for the button

S2 – button for erasing the doorchime‘s memory

Button Installation (see Fig. 3)

Pairing the Button with the Chime

1. Remove the rear cover by inserting a screwdriver into the hole on the side of the button. Insert a

3 V type CR2032 battery into the button. Make sure to observe the correct polarity!

2. Insert 3× 1.5 V AA batteries into the chime. Make sure to observe the correct polarity. Use 1.5 V

alkaline batteries only; do not use rechargeable 1.2 V batteries.

3. Once the batteries are inserted, the chime will switch to self-learning pairing mode, which lasts for

30 seconds. During this time, press the ring button. The LED on the doorbell will ash, the chime

will ring and the button is now paired with the chime. This automatically ends self-learning mode.

4. Re-assemble the button.

5. To pair additional buttons, repeat the process from step 1.

6. You can pair a maximum of 8 buttons this way.

7. Transmission range is 100 m in an open space without electromagnetic interference. The range is

inuenced by local conditions, such as the number of walls through which the signal has to pass,

metal door frames and other elements which aect the transmission of radio signals (presence

of other radio devices operating at a similar frequency, such as wireless thermometers, gate

controls etc.). Transmission range can decrease drastically due to these factors.

8. The chime (receiver) is designed for permanent placement in a room or can be used as a

portable „pager“.

Note: If you pair another button (9th and more), the memory of the rst buttons in descending order

will be automatically erased.

Product specificaties

Merk:	EMOS
Categorie:	Deurbel
Model:	P5712
Kleur van het product:	Grijs
Connectiviteitstechnologie:	Draadloos
Accu/Batterij voltage:	12 V
Ondersteund aantal accu's/batterijen:	4
Maximumbereik:	100 m
Frequentie:	433.92 MHz
Aantal melodieën:	16
Type batterij:	AA/A23