Electro Harmonix Switchblade Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Electro Harmonix Switchblade (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
SWITCHBLADE
Channel Selector
Congratulations! You have just purchased the Switchblade Channel Selector. The
Switchblade is capable of carrying out all of your simple switching needs, without
having to worry about batteries and power adaptors.
-OPERATION-
FOOTSWITCH
Switches the Y jack connection between the A jack and B jack.
The Switchblade can be used in two directions, meaning the signal path can flow from A/B to
Y,
or
from Y to A/B.
Using the Switchblade to switch between two instruments: plug the instruments into jack A
and jack B using ¼” instrument cables. Then connect jack Y to the next device in your signal
chain (effects, if any, or amplifier if none). Use the footswitch to switch between the
instruments.
Using the Switchblade to switch between two amplifiers: plug the amplifiers into jack A and
jack B using ¼” instrument cables. Then connect jack Y to the previous device in your signal
chain (effects, if any, or instrument if none). Use the footswitch to switch between
amplifiers.
The Switchblade is not limited the above two applications. Here are two more application
examples:
Y: Instrument
Effects chain A, effects chain B
Y: Amplifier head
Speaker cabinet A, speaker cabinet B (be sure to use
speaker
cable and not instrument cable for this application).
The Switchblade is a passive device and requires no power supply, such as a battery or
power adapter. The Switchblade does not support stereo use and will only work with ¼”
mono cables.
- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or complete and return the enclosed
warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its discretion, a product
that fails to operate due to defects in materials or workmanship for a period of one year from date of
purchase. This applies only to original purchasers who have bought their product from an authorized Electro-
Harmonix retailer. Repaired or replaced units will then be warranted for the unexpired portion of the original
warranty term.
If you should need to return your unit for service within the warranty period, please contact the appropriate
office listed below. Customers outside the regions listed below, please contact EHX Customer Service for
information on warranty repairs at info@ehx.com or +1- - -8300. USA and Canadian customers: please 718 937
obtain a (RA#) from EHX Customer Service before returning your product. Return Authorization Number
Include with your returned unit: a written description of the problem as well as your name, address,
telephone number, e-mail address, and RA#; and a copy of your receipt clearly showing the purchase date.
United States & Canada
EHX CUSTOMER SERVICE
ELECTRO-HARMONIX
c/o NEW SENSOR CORP.
47-50 33RD STREET
LONG ISLAND CITY, NY 11101
Tel: 718- - 937 8300
Email: info@ehx.com
Europe
JOHN WILLIAMS
ELECTRO-HARMONIX UK
13 CWMDONKIN TERRACE
SWANSEA SA2 0RQ
UNITED KINGDOM
Tel: +44 179 247 3258
Email: electroharmonixuk@virginmedia.com
This warranty gives a purchaser specific legal rights. A purchaser may have even greater rights depending
upon the laws of the jurisdiction within which the product was purchased.
To hear demos on all EHX pedals visit us on the web at www.ehx.com
Email us at info@ehx.com
FCC COMPLIANCE
Note:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help .
Modifications not expressly approved by the manufacturer could void the user's authority to operate the
equipment under FCC rules.


Product specificaties

Merk: Electro Harmonix
Categorie: Niet gecategoriseerd
Model: Switchblade

Heb je hulp nodig?

Als je hulp nodig hebt met Electro Harmonix Switchblade stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Electro Harmonix

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd