Electro Harmonix Memory Toy Handleiding


Lees hieronder de πŸ“– handleiding in het Nederlandse voor Electro Harmonix Memory Toy (1 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 240 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
MEMORY T OY
ANALOG DELAY WITH MODULATION
Congratulations on your purchase of the Electro-Harmonix MEMORY TOY…a
compact analog delay that takes its heritage from our 1970’s Memory Man and the
legendary Deluxe Memory Man. Like the Memory Boy, the is based MEMORY TOY
on the Deluxe Memory Man analog circuit. A modulation switch allows quick access to
lush analog chorus.
β€” POWER β€”
β€” OPERATING INSTRUCTION and CONTROLS β€”
Connect your guitar to the INPUT jack of the and the AMP MEMORY TOY
jack to your amplifier. The can be used in combination with MEMORY TOY
other effects devices. Experiment with any combination to develop your own
unique sound. The footswitch toggles between effect and true bypass modes.
DELAY Y–Controls the delay time your of MEMORY TO . The range of delay time
is from 30ms to 550ms. Turn the delay time clockwise to increase the delay amount.
BLEND BLEND–The control allows you to vary the mix of direct and delayed
signals from 100% dry when set counter-clockwise to 100% wet at full clockwise.
FEEDBACK FEEDBACK–The control increases the number of ay repeats or del
multiple echoes. At high settings the unit will begin to self-oscillate. Fairly high
feedback with short delay settings produces a reverb type of effect.
M Switch OD – When set to the ON position, the MOD switch will enable a slow
modulation on the delay time similar to the chorus modulation of the Deluxe Memory
Man. Set the MOD switch to the OFF position to disable all modulation.
INPUT JACK – Connect the output of your instrument or another effects pedal to
this jack. The input impedance presented at the INPUT jack is 1 M . 
AMP JACK – Connect the AMP jack to your amplifier input or the input of another
effects pedal.
STATUS LED and FOOTSWITCH – When the STATUS LED is lit, the Memory Toy is
in effect mode. When the LED is off, the Memory Toy is in true bypass mode. Use the
FOOTSWITCH to toggle between the two modes.
Your
MEMORY TOY
comes supplied with a 9 volt battery.
WARNING:
When using a
power adaptor, use only a
96 200DC- BI
. Do not use any other adapters. Using other
adapters, even those made by Electro-Harmonix, could cause harm to the unit, the
adapter or you.


Product specificaties

Merk: Electro Harmonix
Categorie: Niet gecategoriseerd
Model: Memory Toy

Heb je hulp nodig?

Als je hulp nodig hebt met Electro Harmonix Memory Toy stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Electro Harmonix

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd