Electro Harmonix Holy Stain Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Electro Harmonix Holy Stain (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 295 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
HOLY STAIN
EH Multi Effect Pedal
Distortion/Reverb/Pitch Shift/Tremolo
Congratulations on your purchase of the Holy Stain: the first multi-effect pedal from Electro-
Harmonix. The Holy Stain is comprised of two stages: an analog distortion and a DSP. Two
types of distortion are available: Fuzz and Drive. There are four DSP functions: Room Reverb,
Hall Reverb, Pitch Shift and Tremolo. can choose from one distortion mode and one DSP One
mode at a time or bypass either stage. Please read further to learn how to fully operate your
Holy Stain.
- EFFECT DESCRIPTIONS -
DISTORTION
The Distortion section of the Holy Stain is made up of 4 controls: DIRT, COLOR, TONE and
VOLUME. DIRT and COLOR are both rotary switches while TONE and VOLUME are rotary
potentiometers.
The control allows you to change the type of distortion from Clean to Fuzz to Drive. The DIRT
Drive setting gives you a smooth distortion. The Fuzz setting is a harder edged distortion
compared to the Drive setting. Use the setting to bypass the distortion. Clean Please note:
the Clean setting is part of the distortion circuit so you may still hear a little grit when set to
Clean.
The Holy Stain has two controls to help tailor your distortion’s tone: COLOR and TONE. The
COLOR switch subtly changes the character of the distortion using three settings: Bright, Dark
and Warm. Use the Bright setting for a full frequency distortion. Choose the Dark setting to cut
high frequencies for a smoother distortion. The Warm setting is somewhere in between the
other two giving a rounder distortion. Please note: when DIRT is set to Clean, the COLOR
switch has no effect on the tone except that in Warm mode your sound may be slightly
distorted, depending on the volume of your pickups. The knob is a drastic tone control TONE
that, when set to extremes, will allow you to emphasize the highs or lows. Set TONE to the
middle for a nice, even, full frequency sound.
The control sets the overall output volume from the distortion stage. The output of VOLUME
the distortion stage is sent directly into the input of the DSP.
ROOM and HALL REVERB
The two reverb settings are excellent sounding, easy-to-use reverbs. The primary difference
between the Room and Hall reverbs is the pre-delay time. The Hall setting has a longer pre-
delay as compared to the Room. Pre-delay is the delay time between playing a note and hearing
the onset of the reverb effect.
All four DSP functions allow you to change their sound using the AMOUNT knob. The AMOUNT
knob’s function changes with each setting. For the two reverbs: the AMOUNT knob sets the
reverb time or length of reverb tail. As you turn the AMOUNT knob clockwise the reverb time
will increase.
The knob sets the balance between the output of the distortion circuit and the output of MIX
the DSP. When the MIX knob is set to fully counter-clockwise you will hear only distortion, no
DSP. When the MIX knob is set fully clockwise you will hear the direct output of the DSP which
may include the distortion that is present at the DSP’s input.
Press the Footswitch to cycle through the 4 DSP modes. MODE
PITCH SHIFT
In Pitch Shift mode, the Holy Stain will change the pitch of the note you play up to a 3rd and
down to a 4th. This means that when the AMOUNT knob is set to the full clockwise position, if
you play a C note on the guitar, the Holy Stain will shift that note up to an E. If the AMOUNT
knob is set to full counter-clockwise, the Holy Stain will shift the C note down to a G.
In Pitch Shift mode, the AMOUNT knob sets the pitch shift amount. When AMOUNT is set to 12
o’clock, you will hear practically no pitch shift. As you turn the knob in the clockwise direction,
your notes will shift up. As you turn AMOUNT counter-clockwise your notes shift down. The
AMOUNT knob, in Pitch Shift mode, is continuously variable from a 4th to + a 3rd. It does not
change the pitch in discrete steps. Set the AMOUNT knob to somewhere around 12 o’clock to
double or thicken your sound without changing the pitch.
The MIX knob controls the volume of your original note versus the volume of the pitch shifted
note. To hear an equal balance between original and pitch shifted notes, turn the MIX knob to
12 o’clock. To hear only the pitch shifted notes, turn MIX to its fully clockwise position.
TREMOLO
The Tremolo effect in the Holy Stain is a simple tremolo effect with some reverb thrown in. As
you turn the AMOUNT knob clockwise, the rate of the tremolo effect will quicken and the
amount of reverb will increase.
The MIX knob controls the depth of the Tremolo effect. As you turn the MIX knob clockwise you
will hear more Tremolo. Turn the MIX knob to its maximum setting for maximum Tremolo.
- CONTROLS -
DIRT Switch Switches between CLEAN, FUZZ and DRIVE. Use this switch to change the type
of distortion. Set it to CLEAN to bypass the distortion.
COLOR Switch Switches between BRIGHT, DARK and WARM. Use this switch to make
subtle changes to the character of your distortion. Please note: when DIRT is set to CLEAN, the
WARM setting of the COLOR switch may produce some distortion.
TONE Knob Use this control to drastically change the sound of your distortion. As you turn
the TONE knob counter-clockwise from its middle position, the bass response will increase and
treble will decrease. As you turn the TONE knob clockwise from the middle, the treble response
will increase and bass will decrease. Turn TONE to the middle position to obtain an even
frequency response.
VOLUME Knob Sets the output level of the distortion stage. As you turn the VOLUME knob
clockwise, the volume will increase.
AMOUNT Knob Controls the DSP parameters. The function of this knob changes for each
DSP setting:
DSP Function AMOUNT Parameter
Room Reverb Reverb Time
Hall Reverb Reverb Time
Pitch Shift Pitch Shift Amount: - 4th to + 3rd
Tremolo Tremolo Rate
MIX Knob This control sets the balance between the output of the distortion and the output
of the DSP. The counter-clockwise position will yield 100% distortion. The clockwise position will
yield 100% DSP. When the DSP is in Pitch Shift mode, set the MIX knob to 12 o’clock to hear an
equal balance of your original note and the pitch shifted note. In Tremolo mode, the MIX knob
acts like a Depth control for the Tremolo effect. The more you turn MIX clockwise the more
tremolo you will hear.
STATUS LED and BYPASS FOOTSWITCH The BYPASS Footswitch toggles the Holy Stain
between Effect and True Bypass modes. When the is lit, the Holy Stain effect is STATUS LED
active, when the STATUS LED is off, the Holy Stain is in True Bypass mode.
MODE FOOTSWITCH and LEDs The MODE Footswitch cycles through the 4 DSP effects in
the following order: Room Reverb, Hall Reverb, Pitch Shift, Tremolo, Room Reverb, etc. When
you first apply power to the Holy Stain, it will start in the Room Reverb setting and the ROOM
REVERB LED will be lit. If you then press and release the MODE Footswitch, the Holy Stain will
switch to Hall Reverb and the HALL REVERB LED will light. Continue to press and release the
MODE Footswitch to cycle through the rest of the DSP effects.
INPUT Jack – This ¼” jack is the audio input to the Holy Stain. The input impedance
presented at this jack is 100k .
OUTPUT Jack This ¼” jack is the audio output from the Holy Stain. The output impedance
at this jack is 570 .
EXP. PEDAL Jack – This ¼” input accepts an Expression Pedal with TRS connection. The
Expression Pedal takes over the AMOUNT knob so that you can modulate the DSP effects with
your foot. To obtain the full range of the AMOUNT knob with the Expression Pedal, set AMOUNT
to 12 o’clock. To change the range of the Expression Pedal, try different settings for the
AMOUNT knob. Some acceptable Expression Pedals include: Boss FV-500L, Alesis F2, Roland
EV7, Moog Music EP2, Roland EV5 and M-Audio EX- P.
9V Power Jack – Plug the output of the Holy Stain’s supplied AC Ada pter into this jack located
at the top of the Holy Stain. The Holy Stain requires 9VDC at 100mA with a center negative
plug. The Holy Stain accepts Boss style AC Adapters.
- WARNINGS -
To achieve its incredible distortion, the Holy Stain has a very high maximum gain. This requires
that both the pickups and cables be well shielded and properly grounded to avoid excessive hum
and stray oscillations when the FUZZ and DRIVE settings are used.
WARNING: Use only the 9.6VDC/200mA AC adapter the Holy Stain comes supplied with. Do not
use any other AC adapters. Using other AC adapters, even those made by Electro-Harmonix,
could cause harm to the unit, the adapter or you. The Holy Stain does not use batteries.


Product specificaties

Merk: Electro Harmonix
Categorie: Niet gecategoriseerd
Model: Holy Stain

Heb je hulp nodig?

Als je hulp nodig hebt met Electro Harmonix Holy Stain stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Electro Harmonix

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd