Electro Harmonix CNTL Knob Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Electro Harmonix CNTL Knob (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
CNTL KNOB
Dual Static Expression Knobs
Congratulations on your purchase of the Electro-Harmonix Cntl Knob! The
Cntl Knob is a compact, easy- -use utility pedal providing remote static to
knob control for devices with expression control jacks. With the Cntl
Knob, the user can set two preset values, representing two positions of a
traditional expression pedal. Use the Cntl Knob’s onboard footswitch to
toggle between the two knob settings.
It works great with any device featuring expression pedal input, an
including the Electro-Harmonix Grand Canyon® Delay and Looper Oceans ,
12® Dual Stereo Reverb, Superego+™ Synth Engine, Super Pulsar™
Tremolo and many other pedals and devices made by Electro-Harmonix
and other manufacturers.
-USING THE CNTL KNOB-
Connect the supplied Tip-Ring-Sleeve (TRS) cable to the Cntl Knob’s jack
and to the expression jack on the device you want to control. We
recommend the device be powered down while making the connection.
Connect an optional 9VDC, cen -negative power supply to the 9V power ter
jack at the top of the Cntl Knob for LED indication. 9V power only lights
the Cntl Knob ’s LEDs. Power is not required to use the expression knobs.
The Cntl Knob has 2 Expression knobs, 1 footswitch and one pushbutton
for TRS polarity. They work as follows:
EXP 1 Knob –The position of this knob determines the first expression
setting. The fully counter-clockwise position corresponds to the heel
position on a standard expression pedal while the fully clockwise position
corresponds to the toe position.
• The EXP 1 knob setting is active on the EXP OUT jack when the
LED located below the EXP 1 knob is lit.
EXP 2 Knob –The position of this knob determines the second
expression setting. The fully counter-clockwise position corresponds to
the heel position on a standard expression pedal while the fully clockwise
position corresponds to the toe position.
• The EXP 2 knob setting is active on the EXP OUT jack when the
LED located below the EXP 2 knob is lit.
EXP OUT Jack –This jack outputs the expression value set by the
currently active knob. A TRS (t -ring-sleeve) cable is required for this ip
jack. Please do not connect a TS (tip-sleeve) cable to the EXP OUT jack; it
will not work and may cause damage to your equipment.
TRS +/- Button –When this button in the inward position the is ,
polarity of the EXP OUT jack Ring- -Wiper. When this button is in the is to
outward position, the polarity of EXP OUT is Tip- -Wiper. to
• This button must be set to comply with the expression polarity of
the device that is being controlled. Please check the user manual
of the device for the required expression polarity.
• For all EHX products, such as the Deluxe Big Muff Pi®, Deluxe
Memory Boy™ Analog Delay and Pitchfork® Pitch Shifter, this
toggle should be in the outward position (Tip- -Wiper polarity). to
Footswitch & LEDs –A press on the footswitch toggles the active
expression setting on EXP OUT between EXP 1 and EXP 2. If power is
applied, the LEDs below each knob light to indicate the currently active
knob.
9V Power Jack – An optional 9VDC, center-negative power supply can
be inserted to provide power the LEDs at this jack. The current draw is to
5mA. The maximum acceptable DC voltage for this power supply is
18VDC. The Cntl Knob does not take batteries.
Please note: the exact function the Cntl Knob expression setting of
depends on the device to which it is connected. Please refer to the
device’s user manual for more information on the functions assigned to
the expression input.
- WARRANTY INFORMATION -
Please register online at http://www.ehx.com/product-registration or
complete and return the enclosed warranty card within 10 days of
purchase. Electro-Harmonix will repair or replace, at its discretion, a
product that fails to operate due to defects in materials or workmanship
for a period of one year from date of purchase. This applies only to
original purchasers who have bought their product from an authorized
Electro-Harmonix retailer. Repaired or replaced units will then be
warranted for the unexpired portion of the original warranty term.
If you should need to return your unit for service within the warranty
period, please contact the appropriate office listed below. Customers
outside the regions listed below, please contact EHX Customer Service
for information on warranty repairs at info@ehx.com or +1-718-937-
8300. USA and Canadian customers: please obtain a Return
Authorization Number (RA#) from EHX Customer Service before
returning your product. Include with your returned unit a written  
description of the problem as well as your name, address, telephone
number, e-mail address, RA# and a copy of your receipt clearly showing
the purchase date.
United States & Canada Europe
EHX CUSTOMER SERVICE JOHN WILLIAMS
ELECTRO-HARMONIX ELECTRO-HARMONIXUK
c/o NEW SENSOR CORP. 13 CWMDONKIN TERRACE
55-01 2ND STREET SWANSEASA2 0RQ
LONG ISLAND CITY, NY11101 UNITED KINGDOM
Tel: 718- - Tel: +44 179 247 3258 937 8300
Email: Email:electroharmonixuk@virginmedia.cominfo@ehx.com
To hear demos of all EHX pedals visit us on the web at www.ehx.com
Email us at info@ehx.com


Product specificaties

Merk: Electro Harmonix
Categorie: Niet gecategoriseerd
Model: CNTL Knob

Heb je hulp nodig?

Als je hulp nodig hebt met Electro Harmonix CNTL Knob stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Electro Harmonix

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd