Electro Harmonix Blurst Handleiding

Electro Harmonix Niet gecategoriseerd Blurst

Lees hieronder de 📖 handleiding in het Nederlandse voor Electro Harmonix Blurst (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 31 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/2

BLURST

Modulat Filter ed

Congratulations on your purchase of the Electro-Harmonix Blurst. The Blurst

is an analog low pass filter controllable by either internal or external

modulation. Use the parameters of the pedal to create a variety of sweeping

filter effects, including sounds reminiscent of vintage synthesizers.

While a typical envelope filter’s modulation is controlled by your guitar’s

attack, the filter in the Blurst is modulated by an internal low frequency

oscillator (LFO), similar to a tremolo or phaser. When you add an expression

pedal or control voltage ( source to the Blurst, you have even greater CV)

control over either the LFO or the filter itself.

The Blurst all-analog signal path contains fourth-order low pass filter with ’s a

variable resonance. Basic modulation is controllable via a variable internal

LFO with a choice of three wave shapes The modulation (including the LFO .

itself) controlled digitally, allowing for tap-tempo (with three tap-divide is

options and expression pedal control of your choice of three selectable )

parameters. These features greatly expand the variety of filtered sounds you

can generate with the Blurst.

- USING THE BLURST -

Power the Blurst with the included 9-volt power supply. The left, yellow LED

puls in time the set modulation rate. Press the right footswitch es to BYPASS

to engage the effect; t orange status LED lights to indicate that the effect he

is engaged.

S the modulation rate with either the knob or a combination of the et RATE

TAP footswitch and the toggle switch, whichever was most TAP DIVIDE

recently used. Toggle the switch to vary the modulation shape SHAPE

between a triangle wave ( ) rising saw-tooth ( ) a falling saw-tooth, a or

( ). Turn the control to set the frequency range of the filter RANGE

modulat . The maximum range is set with the knob at 50% (or 12 ion RANGE

o clock as indicated by the center detent). As you turn the knob ’ RANGE

counterclockwise (towards ), the range gets smaller and simultaneously LO

shifts towards lower frequencies. When you turn the knob clockwise RANGE

(towards from the center detent, the range also gets small and shifts HI) er

to higher frequencies.

RESONANCE sets the resonance (or Q factor) of the filter and affects the ,

output level of the filtered sound. Set the knob to control the blend BLEND

of the dry and filtered signal The knob controls the output . VOLUME

volume.

When you plug an expression pedal or a suitable control voltage (CV) source

(such as an EHX 8-Step Program) into the jack, set the three-way EXP EXP

MODE switch to select which parameter the expression pedal CV source or

controls. In mode you control the modulation rate, with the toe RATE

equaling the knob, or, if tap-tempo is enabled, the heel equaling the RATE

current tap-tempo setting. In mode you control the frequency range RANGE

of the filter, with the toe equaling the knob. In mode the RANGE FILTER

expression pedal or CV source controls the cutoff frequency of the filter

directly. In this mode, the and controls will do nothing. RATE RANGE

- CONTROLS I/O JACKS, POWER - ,

BYPASS Footswitch & Orange Status LED The orange LED illuminate–s

when the effect is engaged The status LED glows brightly to signal that all .

operational voltages are satisfactory. Tap the footswitch to toggle between

effect on and off. When the effect is off, the pedal is in true bypass mode.

Yellow Filter Status LED – The yellow LED illuminates based on the

current cutoff frequency of the filter. In most cases it can be used as a visual

representation of the rate of the LFO modulating the filter. NOTE: at certain

settings depending upon the position of the RANGE knob the LED will — —

remain lit or will not light at all.

TAP Footswitch Use this footswitch to tap in a tempo for the LFO. –

VOLUME Knob in effect mode. – Sets the Blurst’s output volume

BLEND Knob Sets the mix between dry and wet (filtered) signal. –

RESONANCE Knob – Sets the resonance of the filter; also affects the

volume of the filtered signal.

RANGE Knob –S ation. ets the frequency range of the filter’s modul

Maximum range with the knob at 50%. Range gets smaller and centers

around lower frequencies as you bring the knob from 50% to minimum.

Range gets smaller and centers around higher frequencies as you bring the

knob from 50% to maximum.

RATE Knob – ntrols the speed of modulation. Co

EXP MODE Switch – Determines which parameter the expression pedal

controls.

TAP DIVIDE Switch Sets the note type based on tapped in quarter –

notes.

SHAPE Switch – Sets the waveform shape of the LFO.

INPUT Jack Plug your instrument or the output of another effects pedal –

into this . ¼” jack. The input impedance is 2.2M

OUTPUT Jack Outputs the Blurst audio signal. The output impedance – ’s is

220.

EXP Jack – Plug a TRS expression pedal or other CV device (such as an EHX

8-Step Program) into this ¼” jack.

9V Power Jack Plug the output of the AC adapter into the 9V power jack –

located at the top of the Blurst. The Blurst draws 56mA at 9VDC with a

center negative plug. The Blurst accepts Boss® and Ibanez® style AC

Adapters capable of delivering at least 100 mA.

- WARRANTY INFORMATION -

Please register online at http://www.ehx.com/product-registration or complete and return the

enclosed warranty card within 10 days of purchase. Electro-Harmonix will repair or replace, at its

discretion, a product that fails to operate due to defects in materials or workmanship for a period

of one year from date of purchase. This applies only to original purchasers who have bought their

product from an authorized Electro-Harmonix retailer. Repaired or replaced units will then be

warranted for the unexpired portion of the original warranty term.

If you should need to return your unit for service within the warranty period, please contact the

appropriate office listed below. Customers outside the regions listed below, please contact EHX

Customer Service for information on warranty repairs at info@ehx.com or +1-718-937-8300. USA

and Canadian customers: please obtain a Return Authorization Number (RA#) from EHX

Customer Service before returning your product. Include  with your returned unit  a written

description of the problem as well as your name, address, telephone number, e-mail address,

RA# and a copy of your receipt clearly showing the purchase date.

United States & Canada Europe

EHX CUSTOMER SERVICE JOHN WILLIAMS

ELECTRO-HARMONIX ELECTRO-HARMONIX UK

c/o NEW SENSOR CORP. 13 CWMDONKIN TERRACE

55-01 2ND STREET SWANSEA SA2 0RQ

LONG ISLAND CITY, NY 11101 UNITED KINGDOM

Tel: 718- - Tel: +44 179 247 3258 937 8300

Email: Email: electroharmonixuk@virginmedia.com info@ehx.com

- FCC COMPLIANCE -

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation. If the device is not installed and used in accordance

with the instructions, it may cause harmful interference to radio communications and void the user's authority

to guarantee the equipment.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of

the following measures:



Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.



Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.



Consult the dealer or an experienced radio/TV technician for help .

Modifications not expressly approved by the manufacturer could void the user's authority to operate the

equipment under FCC rules.

To hear demos on all EHX pedals visit us on the web at www.ehx.com

Email us at info@ehx.com

Product specificaties

Merk:	Electro Harmonix
Categorie:	Niet gecategoriseerd
Model:	Blurst

Heb je hulp nodig?

Als je hulp nodig hebt met Electro Harmonix Blurst stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Electro Harmonix

Electro Harmonix Memory Boy Handleiding

16 November 2024

Electro Harmonix Soul POG Handleiding

16 November 2024

Electro Harmonix OD Glove Handleiding

16 November 2024

Electro Harmonix Crayon 69 Handleiding

16 November 2024

Electro Harmonix Good Vibes Handleiding

12 November 2024

Electro Harmonix Cock Fight Handleiding

9 Juli 2024

Electro Harmonix Cock Fight Plus Handleiding

9 Juli 2024

Electro Harmonix Holy Grail Max Handleiding

9 Juli 2024

Electro Harmonix The Worm Handleiding

17 Juni 2024

Electro Harmonix Canyon Echo Handleiding

12 Juni 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Panasonic NB-W250 Handleiding

25 November 2024

Alpine CHM-S611 Handleiding

25 November 2024

AOpen DE3650-C Handleiding

25 November 2024

Lazer Urbanize MIPS Handleiding

25 November 2024

Symmons Dia 353GB-24 Handleiding

25 November 2024

SoundTube IPD-RS62-EZ Handleiding

25 November 2024

Moen Camerist 4905 Handleiding

25 November 2024

Lazer Cameleon DLX Handleiding

25 November 2024

DMT DLD-85 Handleiding

25 November 2024

AOpen AM1120T Handleiding

25 November 2024