Electro Harmonix Attack Decay Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Electro Harmonix Attack Decay (24 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
1
ATTACK DECAY
Tape Reverse Simulator
The original Electro-Harmonix Attack Decay is a hard- -find gem among to
legendary guitar pedals. Originally called a Tape Reverse Simulator, it is known for
producing volume and reverse swells, backward tape sounds, artificially short
staccato notes and bowed instrument effects.
The new Electro-Harmonix Attack Decay reinterprets the vintage unit by keeping
the basic functionality but adding more modern features such as Poly mode and
presets. It can produce a single volume envelope like the original, with Poly or
engaged, put each note you play through separate volume envelopes. The built-
in Harmonix fuzz is now a fully controllable distortion with gain, tone and volume
controls. The effects loop allows the musician or sound designer to place the
volume envelope onto whatever signal is present at the Return jack. An
Expression/CV/Clock input and three user presets give the user total control over
their Attack Decay.
WARNING: Your Attack Decay comes equipped with an Electro-Harmonix 9.6DC-200BI
power supply. The Attack Decay requires at 9VDC with a center negative plug. 140mA
Use of the wrong adapter or a plug with the wrong polarity may damage your Attack
Decay and void the warranty. Do not exceed 10 VDC on the power plug. Power supplies .5
rated for less than will cause the Attack Decay to act unreliably. 140mA
- FEATURES -
Volume envelope swells and quick stabs with adjustable Attack and Decay
times: 4ms to 8s.
Mono mode: a single volume envelope for the full signal present at the INPUT
or RETURN jacks, the envelope resets when you pluck a new note.
Poly mode: gives each note you play its own envelope, as seen on the EHX
HOG2.
Built-in, fully adjustable, Harmonix fuzz enhances the volume envelope effect
and produces bowed instrument sounds.
Built-in effects loop allows for your own pedals to be inserted fore the be
volume envelopes.
Expression pedal or CV control over every knob on the Attack Decay.
Continuous Envelopes turns Attack Decay into a retriggable Tremolo.
Save and recall up to three presets.
High quality analog buffered bypass.
Comes supplied with EHX 96DC-200 power supply.
2
T C ABLE OF ONTENTS
Notes and Specifications 3
Quick Start Guide 3
Controls and LEDs 5
Connections 8
Mono and Poly Modes 9
Expression Pedal Use and Setup 10
Preset Setup and Use 11
Using the Send and Return FX Loop 13
Restoring Factory Settings 14
Secondary Modes and Options 15
Attack Decay Tips & Tricks 20
Secondary Mode Reference Table 22
Warranty Information and Compliance 24
Attack Decay Manual Version 1.2
3
N S OTES AND PECIFICATIONS
Audio input impedance at INPUT jack: 1M
Audio o put impedance OUTPUT jack 500 ut at :
Audio output impedance at SEND jack: 500
Audio input impedance of the RETURN jack: 2M
Current draw: 140 mA
Maximum input signal level: +4.0dBu
Maximum gain: approximately +13dB
Q S G UICK TART UIDE
PLUGGING IN THE ATTACK DECAY
1. Connect the supplied EHX9.6DC AC Adapter into the 9V jack at the
top of the Attack Decay. Plug the AC Adapter into an AC outlet.
2. Connect your guitar or other instrument into the INPUT jack using a
standard 1/4” instrument cable. Connect the OUTPUT jack to your
amp with another standard 1/4 ” instrument cable.
CREATING A VOLUME SWELL EFFECT
1. Ensure none of the PRESET or POLY buttons at the top left of the
Attack Decay are lit. If any button is lit, press once to turn it off. it
2. Ensure that H LED, located above the left footswitch, is turned off.
This turns on and off the Attack Decay’s internal fuzz. If the H LED is
lit, press the left footswitch once to turn it off.
3. Turn the BLEND knob to maximum. This ensures that only the volume
envelope effect is heard and no dry signal is mixed- . in
4. Set the DECAY knob to maximum Set ATTACK to about 10 . . o’clock
5. 50% Start with the VOL knob at . Adjust after playing if needed.
6. Start with the SENS knob set to 50%. Turn SENS if the envelope up
does not trigger with each note; lower SENS if it triggers too often.
7. Now engage POLY mode by pressing the POLY button. You might need
to turn up the ATTACK knob as well.
USING THE HARMONIX FUZZ EFFECT
1. Follow the instructions above to get the desired envelope effect.
2. Deactivate POLY mode if POLY is currently lit.
3. Set the H.VOL knob to 9 o’clock as this fuzz can get loud!
4. Press and release the left footswitch to activate the Harmonix effect.
5. Adjust the sound of the Harmonix fuzz with the three small knobs in
the upper right corner. The HARMONIX knob sets gain/saturation,
TONE adjusts brightness, and H.VOL is the fuzz volume control. ’s


Product specificaties

Merk: Electro Harmonix
Categorie: Niet gecategoriseerd
Model: Attack Decay

Heb je hulp nodig?

Als je hulp nodig hebt met Electro Harmonix Attack Decay stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Electro Harmonix

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd