Electro Harmonix 22500 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Electro Harmonix 22500 (28 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 173 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/28
22500
Dual Stereo Looper
Congratulations on your purchase of the Electro-Harmonix 22500 Dual
Stereo Looper. Although the 22500 has a compact footprint it is loaded
with numerous powerful features, including:
Dual Stereo Loops with either independent or locked loop lengths
Sequential Looping enables verse/chorus switching
Parallel Looping allows simultaneous playback of two loops
Selectable Microphone input with adjustable gain and Phantom Power
Reverse and Octave functions at the touch of a button
Undo-Redo your last overdub
Overdub with adjustable feedback amount
Create loop lengths that are completely free-form, locked to each other
or quantized to internal rhythms
100 Loop Banks per SD Card, each bank containing up to 2 loops
Rhythm Guide with 16 built-in drum loops
Footswitch selectable for All Stop, Tap-Tempo, or Rhythm Start/Stop
USB Port enables backup/restore to PC or MAC
Includes high capacity SD Memory Card for up to 12 hours of loop time
Optional external Bank-Up/Down Foot Controller (sold separately)
9.6VDC/500mA power supply included
WARNING:
Your
22500
comes equipped with an Electro
-
Harmonix 9.6
DC
-
500mA power supply. The 22500 requires 240mA at 9VDC with a center negative
plug and does not accept batteries. Using the wrong adapter may damage your
unit and void the warranty. Please do not exceed 10.5VDC on the power plug.
2
22500 QUICK START GUIDE
MODES Selecting / Types / Use
MODE SELECTION & KNOB: OVERDUB:
TRIGGER:
R TYPE:
R LEVEL:
ERASE:
• Press and release the MODE knob
to select or deselect modes.
• When a particular mode LED is lit
solid, the mode is selected. Turn
MODE to adjust the value seen on
the display.
• If a mode LED is blinking, no mode
is selected. Turn the MODE knob to
scroll through all the modes.
When you land on the MODE you
want to adjust, press and release the
MODE knob to enter into the mode.
The selected LED goes solid.
At this point you can turn the MODE
knob to adjust its value. After doing
so, press and release the MODE
knob to exit out of the mode. The
selected mode LED blinks.
BANK mode allows you to select the
current loop bank. Each SD Card can
hold up to 100 banks, numbered 00
to 99.
LOOP mode is where you change
settings for Loop Lock/Freeform,
Loop Lock Multiply, Quantize,
Parallel/Sequential, and 1-Shot.
LOOP:
Very much like a Feedback control on
a delay effect, the OVERDUB value
sets the loop audio volume loss for
each pass while overdubbing. Set to
100 so the loop never loses volume.
Trigger the start of loop recording
automatically when you start playing
your instrument. Use TRIGGER
mode to set the threshold level. As
the Trigger threshold is set higher,
less signal volume is required to
trigger loop recording.
R(hythm) TEMPO mode displays and
allows adjustment to the tempo. The
displayed tempo is in BPM and
represents the current tempo for
Loops A and B and the Rhythm loop.
R(hythm) TYPE mode displays and
allows you to select a Rhythm. The
22500 comes supplied with 16
Rhythms from the factory. You may
also add your own Rhythm loops, see
page for more information.
R(hythm) LEVEL mode sets the
volume of the Rhythm loop. The
range is 0 to 100.
R LEVEL has a second page which
displays “COPY”. COPY mode
initiates the copy of the factory
default rhythms to the SD Card.
ERASE mode erases either Loop A or
Loop B or both loops simultaneously.
See pages - for an in-depth
explanation of modes.
16 23
26
Recording / Playing / Overdubbing Loops
Press Once
RECORD
END RECORD,
START PLAYBACK
OVERDUB
END OVERDUB,
CONTINUE PLAYBACK
Press Once
Press Once
Press Once
Press Twice
STOP PLAYBACK
LOOP FSW ACTIONS
LOOP A First:
Even though the loops may be completely independent in
Freeform mode, we recommend you always record Loop A
first. When set to Loop-Lock mode, the 22500 requires Loop A
to be recorded first since Loop B’s length is automacally set
by Loop A.
START RECORDING - No Loop in Memory:
NON QUANTIZE MODE:
1. Set LOOP Mode to .F nP
2. Press LOOP A or B’s FSW once to begin recording loop
immediately. REC LED lights.
4-BEAT QUANTIZE MODES:
1. Set LOOP Mode to . .F 4P Each bar is 4 beats
2. Ensure RHYTHM buon is lit.
3. Press STOP/TAP FSW to start Rhythm loop.
4. Press LOOP A’s FSW once. Recording begins on the
following beat 1. REC LED lights.
END RECORDING / SET LOOP LENGTH:
NON QUANTIZE MODE: Press LOOP A or B’s FSW once to end
recording, set the loop length, and begin playback. PLAY LED
lights solid, MEM LED blinks.
4-BEAT QUANTIZE MODE: Press LOOP A or B’s FSW once to
enter Record-End mode. The loop will stop recording when it
reaches the end of the current bar. PLAY LED lights solid,
MEM LED blinks.
The loop immediately begins playback aer the recording
ends. in 1-Shot mode, the loop does not play back Excepon:
immediately. You must press Loop’s FSW to iniate play back.
LOOP PLAY/STOP:
PLAY: If a loop is stopped, press its FSW once to start
playback. PLAY LED lights solid.
STOP: If the loop is playing, overdubbing, or recording, press
its FSW to stop the loop. twice MEM LED blinks or is lit solid.
OVERDUB START/STOP:
OVERDUB START: While a loop is playing, press the loop’s
FSW once to enter overdub. REC, PLAY LEDs lit solid. MEM
LED blinks or is lit solid. If blinking, undo may be performed.
OVERDUB STOP: While a loop is overdubbing, press its FSW
once to end overdub; the loop connues playback. PLAY LED
lights solid, MEM LED blinks indicang undo is available.
3


Product specificaties

Merk: Electro Harmonix
Categorie: Niet gecategoriseerd
Model: 22500

Heb je hulp nodig?

Als je hulp nodig hebt met Electro Harmonix 22500 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Electro Harmonix

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd