Electro Harmonix 1440 Handleiding

Electro Harmonix Niet gecategoriseerd 1440

Lees hieronder de 📖 handleiding in het Nederlandse voor Electro Harmonix 1440 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/8

Congratulations on your purchase of the 1440 Stereo Looper! Enjoy 1440

total seconds (24 minutes) of high-quality, stereo recording time and the

ability to store 20 different stereo loops. The 1440 looper is packed with

features such as reverse and octave speed effects, variable speed playback

and overdub, loop-stop fadeout, 1-shot, footswitch retrigger, the ability to

synchronize loops to MIDI clock and a downloadable Mac/Windows appli-

cation to easily transfer loops back and forth with a supplied USB cable.

Features Include:

t 24 minutes of loop recording time.

t 20 selectable, independent stereo loops that remain in memory until

you erase them.

t High quality, uncompressed audio: 24-bit A/D/A, 44.1kHz sample rate.

t Undo-Redo function (also available via optional footswitch).

t Reverse and Octave speed effects at the touch of a button or the

press of a footswitch.

t Footswitch selectable for STOP or Effects: Reverse, Octave or Loop

Retrigger.

t Unlimited overdubbing with adjustable Overdub feedback level.

t Optional external footswitch control for selecting loops and Undo/Redo.

t Programmable looping order: REC/PLAY/DUB or REC/DUB/PLAY.

t Adjustable fadeout time upon stopping a loop.

t Loop synchronization to external MIDI Clock.

t Downloadable Mac or Windows application for making easy loop

transfers between 1440 and computer.

t USB connection for loop audio transfers.

t AC adapter included.

WARNING: Your 1440 comes equipped with an Electro-Harmonix 9.6DC-200 power sup-

ply. The 1440 requires 150mA at 9VDC with a center negative plug. Use of the wrong

adapter or a plug with the wrong polarity may damage the device and void the warranty.

Do not exceed 10.5VDC on the power plug. Power supplies rated for less than 150mA will

cause the 1440 to act unreliably.

Table Of Contents

Quick Start Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Controls, Connections and Indicators 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Looping Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Mode Knob Functions 10 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Loop Select . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

STOP [FX] Footswitch Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

External Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Fadeout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Tempo Knob Precision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Reference Guide and Special Features 12 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1 SHOT Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Looping Function Order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Retrigger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

USB File Backup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Firmware and App Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Factory Restore 14 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Notes and Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Warranty Information and Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Electro-Harmonix

1440 Loop Manager

Computer Application

The 1440 app allows you to import

your 1440 loops to your computer

for back up or to use in other soft-

ware. The application also allows

you to export many types of audio

les—including mp3, wav, aiff, and

ac, at any sample rate and bit

depth—from your computer to the

1440, to use as if you recorded the

loop on the 1440 to begin with.

To download the application for Windows and Mac,

go to www.ehx.com/1440

- 15 -

WARRANTY INFORMATION

Please register online at www.ehx.com/product-registration or complete and

return the enclosed warranty card within 10 days of purchase. Electro-Harmonix

will repair or replace, at its discretion, a product that fails to operate due to

defects in materials or workmanship for a period of one year from date of pur-

chase. This applies only to original purchasers who have bought their product

from an authorized Electro-Harmonix retailer. Repaired or replaced units will

then be warranted for the unexpired portion of the original warranty term.

If you should need to return your unit for service within the warranty period,

please contact the appropriate ofce listed below. Customers outside the re-

gions listed below, please contact EHX Customer Service for information on war-

ranty repairs at info@ehx.com or +1-718-937-8300. USA and Canadian customers:

please obtain a (RA#) from EHX Customer Service Return Authorization Number

before returning your product. With your returned unit, include a written descrip-

tion of the problem as well as your name, address, telephone number, e-mail

address, RA# and a copy of your receipt clearly showing the purchase date.

COMPLIANCE

Note: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide rea-

sonable protection against harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television reception, which can

be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Modications not expressly approved by the manufacturer could void the user’s authority

to operate the equipment under FCC rules.

United States & Canada

EHX Customer Service

Electro-Harmonix

co New Sensor Corp.

55-01 2nd Street

Long Island City, NY 11101

Tel: 718-937-8300

Email: info@ehx.com

Europe

John Williams

Electro-Harmonix UK

13 Cwmdonkin Terrace

Swansea SA2 0RQ

United Kingdom

Tel: +44 179 247 3258

Email: electroharmonixuk@virginmedia.com

The CE logo indicates that this product has been tested and shown to

conform with all applicable European Conformity directives.

Quick Start Guide

Setting Up The 1440

1. Connect the supplied EHX9.6DC AC Adapter into the 9V jack at the top of the

1440. Plug the AC Adapter into your wall.

2. Connect your guitar or other instrument into the INPUT jack(s) using a

standard 1/4" instrument cable. Connect the OUTPUT jack(s) to your amp or

other audio device with another standard 1/4" instrument cable.

3. Make sure the MEM LED is not lit. If it is, turn the MODE knob to select a

bank where the MEM LED turns off, or press and hold the STOP [FX] footswitch

for a few seconds to erase loop memory for the currently selected bank.

Creating A Loop And Using The Loop Footswitch (EXT CLK Disabled)

1. Ensure the EXT CLK button light is off. If it is lit, press the EXT CLK button

once to shut off the light.

2. RECORD: To record a loop, simply press the LOOP footswitch. Recording will

begin immediately.

3. CLOSE THE LOOP: When you are ready to close the loop, and set the loop

length, press the LOOP footswitch again. Recording will stop immediately

and the loop will immediately begin play back.

4. OVERDUB: To record an overdub, press the LOOP footswitch while the loop

is playing back. Overdub recording will begin immediately.

5. OVERDUB END: Press the LOOP footswitch to end overdub recording and

change to playback.

Note: If you want your initial loop audio to be reduced in volume, do not

turn the OVERDUB knob up to maximum.

6. UNDO/REDO: Press and hold the LOOP footswitch for 2 seconds to Undo the

last overdub, or Redo an overdub that was just undone.

7. STOP: To stop the loop, double tap the LOOP footswitch or press the STOP

[FX] footswitch once. Playback will stop immediately.

Note: If the STOP [FX] footswitch function has changed, pressing it will not

stop the loop. See page 10 for details on the STOP [FX] footswitch functionality.

8. PLAY AGAIN: To start playing back a previously recorded loop, tap the LOOP

footswitch once. The loop will immediately start playing back.

Creating A Loop with MIDI Clock

1. Connect MIDI OUT from your MIDI Clock master device to the CABLE SETUP:

MIDI IN jack on the 1440.

2. 1440 SETUP: Enable external clock mode on the 1440 by pressing the EXT

CLK button so that it illuminates. Ensure the MEM LED is not lit. If it is lit, go

to a different loop bank.

3. MIDI MASTER PLAY: Press play on the MIDI Clock master. The 1 SHOT button blinks

on beat 1 only while the EXT CLK button blinks on the other beats in each bar.

- 3 -- 14 -

Notes and Specications

1440 Stereo Looper

t Audio input impedance for each input: 1MΩ

t Audio output impedance for each output: 370Ω

t Current draw: 150mA

t Maximum input signal level: +6 dBu

t Loop time: 24 minutes

t Audio quality: 24-bit, 44.1kHz Sample rate

t Bypass and dry signal: high quality analog buffered bypass at unity gain; dry

signal is analog through the 1440.

1440 Loop Manager Application System Requirements

t MAC: Operating system must be macOS X Sierra (10.12) or higher.

t Windows: Operating system must be Windows 7 or higher.

Firmware and App Updates

The 1440 Loop Manager app allows for updating the rmware on the 1440 and

the app software itself. Press the settings button in the upper right corner

of the app to reveal the settings menu. Here you can choose to update the

application by clicking on “Software Update…” or to update your 1440 unit

by choosing “Firmware Update…” For either selection, follow the instructions

presented to you on the screen.

Factory Restore

A factory restore clears out all loop memory and returns all parameters to

their factory defaults. To perform a Factory Restore:

1. Unplug the power jack or remove power to the 1440.

2. Hold down the LOOP footswitch while applying power to the 1440.

3. Continue to hold the LOOP footswitch until the REC, PLAY, and MEM LEDs

begin to ash together. This should take approximately 6 seconds.

4. Once all three LEDs start blinking you can release the footswitch. All three

LEDs will continue to ash for about one second until the Factory Restore is

complete.

5. After Factory Restore, the display shows loop-select mode with LOOP 1 as

the default bank, fadeout disabled, all effects off, and STOP mode enabled.

Note: All Loop audio is erased during Factory Restore, and the process cannot

be undone.

Product specificaties

Merk:	Electro Harmonix
Categorie:	Niet gecategoriseerd
Model:	1440

Heb je hulp nodig?

Als je hulp nodig hebt met Electro Harmonix 1440 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Electro Harmonix

Electro Harmonix Memory Boy Handleiding

16 November 2024

Electro Harmonix Soul POG Handleiding

16 November 2024

Electro Harmonix OD Glove Handleiding

16 November 2024

Electro Harmonix Crayon 69 Handleiding

16 November 2024

Electro Harmonix Good Vibes Handleiding

12 November 2024

Electro Harmonix Cock Fight Handleiding

9 Juli 2024

Electro Harmonix Cock Fight Plus Handleiding

9 Juli 2024

Electro Harmonix Holy Grail Max Handleiding

9 Juli 2024

Electro Harmonix The Worm Handleiding

17 Juni 2024

Electro Harmonix Canyon Echo Handleiding

12 Juni 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Panasonic NB-W250 Handleiding

25 November 2024

Alpine CHM-S611 Handleiding

25 November 2024

AOpen DE3650-C Handleiding

25 November 2024

Lazer Urbanize MIPS Handleiding

25 November 2024

Symmons Dia 353GB-24 Handleiding

25 November 2024

SoundTube IPD-RS62-EZ Handleiding

25 November 2024

Moen Camerist 4905 Handleiding

25 November 2024

Lazer Cameleon DLX Handleiding

25 November 2024

DMT DLD-85 Handleiding

25 November 2024

AOpen AM1120T Handleiding

25 November 2024