EdgeCraft DC 320 Handleiding
EdgeCraft
Messenslijper
DC 320
Lees hieronder de 📖 handleiding in het Nederlandse voor EdgeCraft DC 320 (28 pagina's) in de categorie Messenslijper. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/28
© 2022 The Legacy Companies
K N I F E S H A R P E N E R
320 DC
R E A D T H E S E I N S T R U C T I O N S B E F O R E U S E .
I T I S E S S E N T I A L T H AT YO U F O L LO W T H E S E
I N S T R U C T I O N S TO AC H I E V E O P T I M U M R E S U LT S .
IMPORTANT SAFEGUARDS
CAUTION! To prevent risk of injury, stay clear of the knife guide
slots when the unit is turned on.
When using electrical appliances, basic safety precautions should
always be followed including the following:
1. Read all instructions. Every user should read this manual.
2. To protect against electrical hazards, do not immerse the
Chef’sChoice® DC 320 sharpener or detachable power supply
cord in water or other liquid.
3. Make sure that only clean knife blades are inserted in the
sharpener.
4. Turn the appliance OFF, then unplug from the outlet when not
in use, before assembling or disassembling parts and before
cleaning. To unplug, grasp the plug and pull from the outlet.
Never pull from the power cord.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions, or is dropped or damaged in
any manner. Do not incinerate this appliance even if it is severely
damaged. The batteries can explode in fire.
U.S. customers: For warranty claims, please visit www.
chefschoice.com and click “Customer Service” in the footer
at the bottom of the page. Please fill out the webform and a
Customer Relations Representative will respond with additional
information unique to your claim.
Outside U.S.: Please return your sharpener to your local
distributor where the cost of repair or electrical or mechanical
adjustment can be estimated. If the supply cord of this appliance
is damaged, it must be replaced by a repair facility appointed
by the manufacturer because special tools are required. Please
consult your Chef’sChoice® distributor.
7. CAUTION! This appliance may be fitted with a polarized power
plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug will fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician. Do not modify
the plug in anyway.
8. Use only with the Listed/Certified ITE Power Supply provided
with the appliance.
English — 2
9. The use of attachments not recommended or sold by The
Legacy Companies may cause fire, electric shock or injury.
10. The Chef’sChoice® DC 320 sharpener is designed to sharpen
American and European style knives as described in following
sections. Do not attempt to sharpen scissors, ax blades or any
blade that does not fit freely in the slots.
11. Do not let the cord hang over edge of table or counter or touch
hot surfaces.
12. When the power is in the “ON” position (Green flash on switch
is exposed when “ON”), the Chef’sChoice® sharpener should
always be on a stable countertop or table. See ON/OFF power
switch positions on page 4.
13. WARNING: KNIVES PROPERLY SHARPENED ON YOUR
Chef’sChoice® DC 320 SHARPENER WILL BE SHARPER THAN
YOU EXPECT. TO AVOID INJURY, USE AND HANDLE THEM
WITH EXTREME CARE. DO NOT CUT TOWARD ANY PART
OF YOUR FINGERS, HAND OR BODY. DO NOT RUN FINGER
ALONG EDGE. STORE IN A SAFE MANNER.
14. Do not use outdoors.
15. Appliance is not intended to be used or cleaned by children or
persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge of the hazards involved.
16. Do not use honing oils, water or any other lubricant with the
Chef’sChoice® DC 320 sharpener.
17. For household use only.
18. This appliance is intended to be used in household and similar
applications such as: - sta kitchen areas in shops, oces, and
other working environments; - farm houses; - by clients in hotels,
motels, and other residential type environments; - bed and
breakfast type environments.
SAVE THESE INSTRUCTIONS.
English — 3
Prop. 65 Warning for California Residents
WARNING:
CANCER AND REPRODUCTIVE HARM
www.P65Warnings.ca.gov
Product specificaties
| Merk: | EdgeCraft |
| Categorie: | Messenslijper |
| Model: | DC 320 |
Heb je hulp nodig?
Als je hulp nodig hebt met EdgeCraft DC 320 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Messenslijper EdgeCraft
6 Maart 2024
6 Maart 2024
28 Februari 2024
28 Februari 2024
28 Februari 2024
28 Februari 2024
28 Februari 2024
28 Februari 2024
28 Februari 2024
28 Februari 2024
Handleiding Messenslijper
- Messenslijper IKEA
- Messenslijper Krups
- Messenslijper Adler
- Messenslijper Ambiano
- Messenslijper Bartscher
- Messenslijper Beper
- Messenslijper Berkel
- Messenslijper Bifinett
- Messenslijper Blokker
- Messenslijper Bomann
- Messenslijper Domo
- Messenslijper Fagor
- Messenslijper Gardenline
- Messenslijper Gastroback
- Messenslijper Gourmetmaxx
- Messenslijper Graef
- Messenslijper Gude
- Messenslijper Melissa
- Messenslijper Powerplus
- Messenslijper Presto
- Messenslijper Princess
- Messenslijper Roadstar
- Messenslijper Salter
- Messenslijper Silvercrest
- Messenslijper Sogo
- Messenslijper Steba
- Messenslijper Studio
- Messenslijper Tower
- Messenslijper Trebs
- Messenslijper Ozito
- Messenslijper Clatronic
- Messenslijper Guzzanti
- Messenslijper OBH Nordica
- Messenslijper Orbegozo
- Messenslijper Tacklife
- Messenslijper Eldom
- Messenslijper Waring Commercial
- Messenslijper Brentwood
- Messenslijper Herkules
- Messenslijper Genie
- Messenslijper C3
- Messenslijper Orava
- Messenslijper Alpha Tools
- Messenslijper For_Q
- Messenslijper Wüsthof
- Messenslijper Work Sharp
- Messenslijper Petra Electric
- Messenslijper GARDE
- Messenslijper Chef's Choice
- Messenslijper IdeenWelt
- Messenslijper Donau Elektronik
- Messenslijper Sharpal
Nieuwste handleidingen voor Messenslijper
17 November 2024
17 November 2024
16 November 2024
5 September 2024
15 Augustus 2024
15 Augustus 2024
15 Augustus 2024
8 Augustus 2024
9 Juli 2024
18 Mei 2024