EdgeCraft Chef-s Choice - Hybrid 210 Handleiding
EdgeCraft
Messenslijper
Chef-s Choice - Hybrid 210
Lees hieronder de 📖 handleiding in het Nederlandse voor EdgeCraft Chef-s Choice - Hybrid 210 (8 pagina's) in de categorie Messenslijper. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/8
INSTRUCTION MANUAL
Hybrid® Diamond Hone®
Knife Sharpener Model 210
Read instructions before use.
It is essential that you follow these
instructions to achieve optimal results.
2
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always
be followed including the following:
1. Read all instructions. Every user should read this manual.
2. To protect against electrical hazards, do not immerse the Chef’sChoice® Hybrid®
sharpener in water or other liquid.
3. Make sure that only clean knife blades are inserted in Model 210.
4. Unplug from outlet when not in use, before putting on or taking off parts and
before cleaning.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance
malfunctions, or is dropped or damaged in any manner.
U.S. customers: You can return your sharpener to EdgeCraft’s factory for service where
the cost of repair or electrical or mechanical adjustment can be estimated. When the
electrical cord on this appliance is damaged, it must be replaced by the Chef’sChoice®
factory or other qualified service to avoid the danger of electrical shock.
Outside U.S.: Please return your sharpener to your local distributor where the cost of
repair or electrical or mechanical adjustment can be estimated. If the supply cord of
this appliance is damaged, it must be replaced by a repair facility appointed by the
manufacturer because special tools are required. Please consult your Chef’sChoice®
distributor.
7. CAUTION! This appliance may be fitted with a polarized power plug (one blade is wider
than the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. Do not modify the plug in anyway.
8. The use of attachments not recommended or sold by EdgeCraft Corporation may cause
fire, electric shock or injury.
9. The Chef’sChoice® Hybrid® sharpener is designed to sharpen American, European, and
Asian style knives as described in following sections. Do not attempt to sharpen scis-
sors, ax blades or any blade that does not fit freely in the slots.
10. Do not let the cord hang over edge of table or counter or touch hot surfaces.
11. When in the “ON” position (Red flash on switch is exposed when “ON”), the
Chef’sChoice® sharpener should always be on a stable countertop or table.
12. WARNING: KNIVES PROPERLY SHARPENED ON YOUR Chef’sChoice® Hybrid®
SHARPENER WILL BE SHARPER THAN YOU EXPECT. TO AVOID INJURY, USE AND HANDLE
THEM WITH EXTREME CARE. DO NOT CUT TOWARD ANY PART OF YOUR FINGERS, HAND
OR BODY. DO NOT RUN FINGER ALONG EDGE. STORE IN A SAFE MANNER.
13. Do not use outdoors.
14. Close supervision is necessary when any appliance is used by or near children.
15. Do not use honing oils, water or any other lubricant with the Chef’sChoice® Hybrid®
sharpener Model 210.
16. For household use only.
17. SAVE THESE INSTRUCTIONS.
3
Congratulations on your selection of
the Chef’sChoice® Hybrid®
Diamond Hone® Models 210!
The Hybrid® Diamond Hone® Models 210 are manufactured by Chef’sChoice®, the world’s
leader in cutting edge technology. These sharpeners combine advanced electric and manual
sharpening techniques to create an exceptionally effective cutting edge on virtually all of
your knives. The cutting edge is finely honed to extreme sharpness but retains strong micro-
scopic teeth that gives it a highly effective bite for all your food prep needs and especially for
fibrous materials. The edge is surprisingly durable yet can be resharpened quickly whenever
necessary. Commonly the edge can be resharpened in Stage 2 without the need to turn on
the electrical power.
You will be pleased to see how easy the Hybrid® is to use and how well your knives
perform. Read and follow the instruction carefully. Keep the sharpener close at hand so that
you can enjoy the pleasure of sharp knives every day.
DESCRIPTION OF THE
CHEF’SCHOICE HYBRID® DIAMOND HONE KNIFE SHARPENER
The Hybrid® has two sharpening Stages, a first sharpening Stage that is motor driven,
followed by a honing Stage that is entirely manual in operation. The sharpening Stage 1 is
motor driven, has two slots (the two slots on the left) to sharpen alternately the left and right
side of the blade’s edge. Always follow an alternating pattern of sharpening in right and left
slots when using Stage 1. This dual-slot stage quickly establishes a sharp edge that is then
honed and finished in the manual second stage which uses only a single slot (far right slot)
that hones both sides of the edge simultaneously.
USING THE HYBRID® SHARPENER
Note: Always clean your knife before sharpening in the Hybrid®! For your safety, keep your
fingers clear of the blade edge at all times.
You will find that the Hybrid® can create and maintain an exceedingly sharp and effective
edge on all your conventional fine edge and serrated cutlery. The primary edge facets are
each formed in Stage 1 at a nominal 20 degrees on each side of the edge, which results in
a total primary edge of 40 degrees. Stage 2 creates a second bevel at a slightly larger angle
leaving a strong double beveled edge structure that will stay sharp longer. Always use the
sharpener with the stage numbers 1 and 2, facing you.
Product specificaties
| Merk: | EdgeCraft |
| Categorie: | Messenslijper |
| Model: | Chef-s Choice - Hybrid 210 |
Heb je hulp nodig?
Als je hulp nodig hebt met EdgeCraft Chef-s Choice - Hybrid 210 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Messenslijper EdgeCraft
6 Maart 2024
6 Maart 2024
28 Februari 2024
28 Februari 2024
28 Februari 2024
28 Februari 2024
28 Februari 2024
28 Februari 2024
28 Februari 2024
28 Februari 2024
Handleiding Messenslijper
- Messenslijper IKEA
- Messenslijper Krups
- Messenslijper Adler
- Messenslijper Ambiano
- Messenslijper Bartscher
- Messenslijper Beper
- Messenslijper Berkel
- Messenslijper Bifinett
- Messenslijper Blokker
- Messenslijper Bomann
- Messenslijper Domo
- Messenslijper Fagor
- Messenslijper Gardenline
- Messenslijper Gastroback
- Messenslijper Gourmetmaxx
- Messenslijper Graef
- Messenslijper Gude
- Messenslijper Melissa
- Messenslijper Powerplus
- Messenslijper Presto
- Messenslijper Princess
- Messenslijper Roadstar
- Messenslijper Salter
- Messenslijper Silvercrest
- Messenslijper Sogo
- Messenslijper Steba
- Messenslijper Studio
- Messenslijper Tower
- Messenslijper Trebs
- Messenslijper Ozito
- Messenslijper Clatronic
- Messenslijper Guzzanti
- Messenslijper OBH Nordica
- Messenslijper Orbegozo
- Messenslijper Tacklife
- Messenslijper Eldom
- Messenslijper Waring Commercial
- Messenslijper Brentwood
- Messenslijper Herkules
- Messenslijper Genie
- Messenslijper C3
- Messenslijper Orava
- Messenslijper Alpha Tools
- Messenslijper For_Q
- Messenslijper Wüsthof
- Messenslijper Work Sharp
- Messenslijper Petra Electric
- Messenslijper GARDE
- Messenslijper Chef's Choice
- Messenslijper IdeenWelt
- Messenslijper Donau Elektronik
- Messenslijper Sharpal
Nieuwste handleidingen voor Messenslijper
17 November 2024
17 November 2024
16 November 2024
5 September 2024
15 Augustus 2024
15 Augustus 2024
15 Augustus 2024
8 Augustus 2024
9 Juli 2024
18 Mei 2024