East EA300PRO-1100 Handleiding

East UPS EA300PRO-1100

Lees hieronder de 📖 handleiding in het Nederlandse voor East EA300PRO-1100 (20 pagina's) in de categorie UPS. Deze handleiding was nuttig voor 54 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/20
Line Interactive Sinewave UPS
800/1.1 1.5 2K/2.5K/3K VAK/ K/
Uninterruptible Power Supply System
User Manual
1
Table of Contents
1. Important Safety Warning………………………………………………
2
1-1. Transportation
2
1-2. Preparation
2
1-3. Installation
2
1-4. Operation
2
1-5. Maintenance, Service And Faults
3
2. Installation And Setup…………………………………………………
4
2-1. Rear Panel View
4
2-2. Install The UPS
5
2-3. Setup The UPS
5
2-4 Battery Replacement .
7
2-5. Battery Kit Assembly (Option)
8
3. Operations…………………………………………………………………..
10
3-1. Button Operation
10
3-2. LCD Panel
10
3-3. Audible Alarm
11
3-4. LCD Display Wordings Index
12
3-5. UPS Setting
12
3-6. Operating Mode Description
14
3-7. Faults Reference Code
15
3-8. Warning Indicator
15
4. Troubleshooting…………………………………………………………...
16
5. Storage And Maintenance……………………………………………….
18
6. Specifications………………………………………………………………
19
2
1. Important Safety Warning
Please comply with all warnings and operating instructions in this manual strictly. Save this
manual properly and read carefully the following instructions before installing the unit. Do not
operate this unit before reading through all safety information and operating instructions
carefully
1-1. Transportation
Please transport the UPS system only in the original package to protect against shock
and impact.
1-2. Preparation
Condensation may occur if the UPS system is moved directly from cold to warm
environment. The UPS system must be absolutely dry before being installed. Please
allow at least two hours for the UPS system to acclimate the environment.
Do not install the UPS system near water or in moist environments.
Do not install the UPS system where it would be exposed to direct sunlight or near
heater.
Do not block ventilation holes in the UPS housing.
1-3. Installation
Do not connect appliances or devices which would overload the UPS system (e.g.
laser printers) to the UPS output sockets.
Place cables in such a way that no one can step on or trip over them.
Do not connect domestic appliances such as hair dryers to UPS output sockets.
The UPS can be operated by any individuals with no previous experience.
Connect the UPS system only to an earthed shockproof outlet which must be easily
accessible and close to the UPS system.
Please use only VDE-tested, CE-marked mains cable (e.g. the mains cable of your
computer) to connect the UPS system to the building wiring outlet (shockproof
outlet).
Please use only VDE-tested, CE-marked power cables to connect the loads to the UPS
system.
When installing the equipment, it should ensure that the sum of the leakage current
of the UPS and the connected devices does not exceed 3.5mA.
1-4. Operation
Do not disconnect the mains cable on the UPS system or the building wiring outlet
(shockproof socket outlet) during operations since this would cancel the protective
earthing of the UPS system and of all connected loads.
The UPS system features its own, internal current source (batteries). The UPS output
sockets or output terminals block may be electrically live even if the UPS system is not
connected to the building wiring outlet.
In order to fully disconnect the UPS system, first press the OFF/Enter button to
disconnect the mains.
Prevent no fluids or other foreign objects from inside of the UPS system.


Product specificaties

Merk: East
Categorie: UPS
Model: EA300PRO-1100

Heb je hulp nodig?

Als je hulp nodig hebt met East EA300PRO-1100 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden