DJI Car Charger for Inspire 1 Handleiding

DJI Radiografisch bestuurbaar speelgoed Car Charger for Inspire 1

Lees hieronder de šŸ“– handleiding in het Nederlandse voor DJI Car Charger for Inspire 1 (3 pagina's) in de categorie Radiografisch bestuurbaar speelgoed. Deze handleiding was nuttig voor 43 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
2015.12
V1.0
Car Charger for Inspire 1
User Manual
Disclaimer
Thank you for purchasing the Car Charger for Inspire 1
(hereinafter referred to as ā€œproductā€). Read this disclaimer
carefully before using this product. By using this product, you
hereby agree to this disclaimer and signify that you have read
it fully. Please use this product in strict accordance with the
manual and be sure to pay attention to the Warnings. SZ DJI
Technology Co., Ltd. and its afī­liated companies assume no
liability for damage(s) or injuries incurred directly or indirectly
from improper use of this product. Misuse includes, but is not
limited to, using unapproved chargers, charging unapproved
batteries, short-circuiting, overheating, introducing foreign
materials into the product, or touching the terminals with skin or
metal. Refer to the Safety Guidelines and Disclaimer, Intelligent
Flight Battery Safety Guidelines, and User Manual for applicable
information not herein contained.
This device complies with part 15 of the FCC Rules.
DJI is the registered trademark of SZ DJI Technology Co.,
Ltd. (abbreviated as ā€œDJIā€). Names of product, brand, etc.,
appearing in this manual are trademarks or registered
trademarks of their respective owner companies. This product
and manual are copyrighted by DJI with all rights reserved. No
part of this product or manual shall be reproduced in any form
without the prior written consent or authorization of DJI.
This disclaimer is produced in various languages. In the event
of divergence among different versions, the Chinese version
shall prevail when the product in question is purchased in
Mainland China, and English version shall prevail when the
product in question is purchased in any other region.
Proīƒ€le
The Car Charger for Inspire 1 is used to charge the Intelligent
Flight Battery or remote controller through a carā€™s cigarette
lighter port. It comes with low-voltage protection and overheating
protection which automatically cut off charging if your starting
battery voltage is too low or cigarette lighter port exceeds a
certain temperature.
Using the Car Charger
1. Connect one end of the car charger to your carā€™s cigarette
lighter and the other end to the Intelligent Flight Battery or
remote controller.
Ā© 2015 DJI. All Rights Reserved.
The content is subject to change.
Download the latest version from
http://www.dji.com/product/inspire-1
If you have any questions about this document, please
contact DJI by sending a message to
DocSupport@dji.com.
DO NOT cover the car charger. Ensure that there is
sufī­cient heat dissipation.
Always place the car charger on a stable surface.
Use the car charger when the engine is running to
attain optimal performance.
It will take a longer time to charge the Intelligent Flight
Battery and remote controller together.
If the car charger becomes loose and is reconnected
when charging, you may need to unplug and plug the
Intelligent Flight Battery to resume charging.
DO NOT touch the metal connector after it is unplugged.
2. The car chargerā€™s LED indicator glows solid green when charging.
3. When the LED lights on the Intelligent Flight Battery and
remote controller turn off, charging is complete and you should
disconnect the car charger from the cigarette lighter port.
Printed in China .
Speciīƒ€cations
Product Model C6S90
Operating
Temperature 32Ā° to 104Ā° F (0Ā° to 40Ā° C)
DC Input 12.3
-
16 V (Sedan)
25
-
30 V (Coach)
DC Output 26.1 V; 3.45 A; 90 W
Charge Time*
1 hr 40 min (TB47 Intelligent Flight Battery)
2 hours (TB48 Intelligent Flight Battery)
3 hr 20 min (remote controller)
* The charge time was tested in a lab environment at room temperature
and should be taken as reference only.
12 3.
-
16 V
or 25
-
30 V


Product specificaties

Merk: DJI
Categorie: Radiografisch bestuurbaar speelgoed
Model: Car Charger for Inspire 1
Kleur van het product: Zwart
Soort: Radio-Controlled (RC) Model Accessories & Supplies
Aantal: 1
Compatibiliteit: Inspire 1\nTB47, TB48
Type product: Laadadapter
Input voltage bereik: 12.3 - 30 V

Heb je hulp nodig?

Als je hulp nodig hebt met DJI Car Charger for Inspire 1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Radiografisch bestuurbaar speelgoed DJI

Handleiding Radiografisch bestuurbaar speelgoed

Nieuwste handleidingen voor Radiografisch bestuurbaar speelgoed