DeWalt DWX725 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor DeWalt DWX725 (19 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 39 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/19
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIĂ“N, CENTROS DE SERVICIO Y PĂ“LIZA
DE GARANTÍA. LÉASE ESTE INSTRUCTIVO ANTES ADVERTENCIA:
DE USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-D WALT • www.dewalt.comE
DWX725
Heavy-Duty Work Stand
Établi industriel
Soporte de trabajo para trabajo pesado
2
English
DWX725 Heavy-Duty Work Stand
36" (920 mm)
D
C
E
AB
FIG. 1
Components List
A. Beam
B. Carry handle
C. Release button
D. Leg lock lever
E. Transport latch
1
English
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR
ANY D
E
WALT TOOL, CALL US TOLL FREE AT: 1-800-4-D WALT E
(1-800-433-9258)
WARNING: For your own safety, read the work stand
instruction manual before using any accessory. Failure
to heed these warnings may result in personal injury and
serious damage to the work stand and the accessory. When
servicing this tool, use only identical replacement parts.
General Safety Instructions for Work
Stand
WARNING: To reduce the risk of personal injury:
• ALWAYS use eye protection. All users and bystanders must
wear eye protection that conforms to ANSI Z87.1.
• ALWAYS check the stability of the miter saw stand and the miter
saw attached to it before putting the stand or the saw into use
• DO NOT exceed the weight this stand can hold. The main
center beam of the work stand is designed to support 1000lbs.
(453.6kg.) safely in a work environment. It is unsafe to climb, sit
or stand on the stand.
• DO NOT modify or use stand for operations for which it is
unintended.
• DO NOT use the stand on uneven surfaces. The stand is
designed to be used on a flat, stable surface.
• DO NOT use on a slippery surface. The stand load capacity is
greatly reduced when used on slippery surfaces.
Components (Fig. 1)
WARNING: Never modify the stand or any part of it. Damage or
personal injury could result.
Refer to Figure 1 for Components List.
C
D
FIG. 2
Preparation (Fig. 2)
1. Place the work stand on the ground with the folded legs facing
up.
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, result in could death or serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, result in may minor or moderate
injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, result in may property damage.


Product specificaties

Merk: DeWalt
Categorie: Niet gecategoriseerd
Model: DWX725

Heb je hulp nodig?

Als je hulp nodig hebt met DeWalt DWX725 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd DeWalt

DeWalt

DeWalt DCB182 Handleiding

11 December 2024
DeWalt

DeWalt DCB1880 Handleiding

11 December 2024
DeWalt

DeWalt DCB189 Handleiding

11 December 2024
DeWalt

DeWalt DCB184 Handleiding

11 December 2024
DeWalt

DeWalt DCB180 Handleiding

11 December 2024
DeWalt

DeWalt DCB124 Handleiding

11 December 2024
DeWalt

DeWalt DCB185 Handleiding

11 December 2024
DeWalt

DeWalt DCB183G Handleiding

11 December 2024
DeWalt

DeWalt DCB184G Handleiding

11 December 2024
DeWalt

DeWalt DCB187 Handleiding

11 December 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd