DeWalt DWX724 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor DeWalt DWX724 (32 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 34 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/32
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIĂ“N, CENTROS DE SERVICIO Y PĂ“LIZA
DE GARANTÍA. LÉASE ESTE INSTRUCTIVO ANTES ADVERTENCIA:
DE USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-D WALT • www.dewalt.comE
DW723
Heavy-Duty Miter Saw Stand
Heavy-Duty Miter Saw Stand
Heavy-Duty Miter Saw Stand
DWX723
Heavy-Duty Miter Saw Stand/Établi industriel de scie à onglet Soporte para ingleteadora de /
trabajo pesado
DWX724
Compact Miter Saw Stand/Établi compact de scie à onglet/Soporte compacto para ingleteadora
2
English
DWX723/DWX724 Miter Saw Stands
B
2
1
K
A
C
D
E
F
G
H
I
J
FIG. 1
1 2
DWX723 69.5"(1765.3 mm) 151" (3835.4 mm)
DWX724 43" (1092.2 mm) 100" (2540 mm)
Components List
A. Beam
B. DW7231 Miter saw mounting brackets
C. Extension arm
D. DW7232 Work piece support and length
stop
E. Extension arm end cap
F. Extension arm lock lever
G. Release levers
H. Carry handle
I. Locking locator clip
J. Leg lock lever
K. Release button
1
English
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR
ANY D
E
WALT TOOL, CALL US TOLL FREE AT: 1-800-4-D WALT E
(1-800-433-9258)
Miter Saw Stand with Folding Legs
DWX723/DWX724
This stand is designed for use with most miter saws. If you have
any problem with alignment or mounting, call 1-800-4-DEWALT
(1-800-433-9258).
WARNING: For your own safety, read the miter saw
instruction manual before using any accessory. Failure
to heed these warnings may result in personal injury and
serious damage to the miter saw and the accessory. When
servicing this tool, use only identical replacement parts.
Carton Contents
1 Miter saw stand (DWX723 or DWX724)
2 Miter saw mounting brackets (DW7231)
2 Work piece support and length stops (DW7232)
1 Hardware bag
Tools Required
• Drill with 3/8" (9.5mm) drill bit (Not required for D WALT Miter E
Saws)
• Crosshead #2 screwdriver
• 1/2" (13mm) Wrench
Components (Fig. 1)
WARNING: Never modify the stand or any part of it. Damage or
personal injury could result.
Refer to Figure 1 for Components List.
General Safety Instructions for Miter Saw
Stands
WARNING: To reduce the risk of personal injury:
• ALWAYS use eye protection. All users and bystanders must
wear eye protection that conforms to ANSI Z87.1.
• ALWAYS check the stability of the miter saw stand and the miter
saw attached to it before putting the stand or the saw into use.
• DO NOT mount any power tool other than a miter saw to this
stand. Mounting other power tools to this stand could result in
severe personal injury.
• DO NOT exceed the weight this stand can hold. The main center
beam of the miter saw stand is designed to support 500 lbs.
(227kg.) safely in a work environment. It is unsafe to climb, sit or
stand on the stand.
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, result in could death or serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, result in may minor or moderate
injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, result in may property damage.


Product specificaties

Merk: DeWalt
Categorie: Niet gecategoriseerd
Model: DWX724

Heb je hulp nodig?

Als je hulp nodig hebt met DeWalt DWX724 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd DeWalt

DeWalt

DeWalt DCB182 Handleiding

11 December 2024
DeWalt

DeWalt DCB1880 Handleiding

11 December 2024
DeWalt

DeWalt DCB189 Handleiding

11 December 2024
DeWalt

DeWalt DCB184 Handleiding

11 December 2024
DeWalt

DeWalt DCB180 Handleiding

11 December 2024
DeWalt

DeWalt DCB124 Handleiding

11 December 2024
DeWalt

DeWalt DCB185 Handleiding

11 December 2024
DeWalt

DeWalt DCB183G Handleiding

11 December 2024
DeWalt

DeWalt DCB184G Handleiding

11 December 2024
DeWalt

DeWalt DCB187 Handleiding

11 December 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd