Denon DN-312X Handleiding

Denon Mengpaneel DN-312X

Lees hieronder de đź“– handleiding in het Nederlandse voor Denon DN-312X (24 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 52 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
User Guide English ( 2 – 5 )
Guía del usuario Español ( 6 – 9 )
Guide d’utilisation Français ( 10 – 13 )
Guida per l’uso Italiano ( 14 – 17 )
Benutzerhandbuch Deutsch ( 18 – 21 )
A
ppendix English ( 22 – 23 )
2
User Guide ( )English
Introduction
The DN-312X is an ultra-slim 1U rack-mounted 12-channel mixer with 6 mic/line combination
inputs and 6 additional line inputs. It has balanced XLR outputs, a 1/4” (6.35 mm) mono output
that can be used to connect the DN-312X to a remote mixer, a pair of RCA stereo outputs that
can be used to connect to a remote recording device, and 1/4” (6.35 mm) mic monitoring port
that can be used to monitor the mics’ signals. The DN-312X provides individual volume control
for all inputs in addition to volume control for the mono output port and a master volume
control. It has a 3-level equalizer and a controlled priority for Mic/Line 1. It can be powered
from standard AC or 24 V DC power source.
Please see this guide’s Setup chapter to learn how to integrate DN-312X with your audio
system.
Box Contents
DN-312X
Power Cable
User Guide
Safety & Warranty Manual
Support
For the latest information about this product (system requirements, compatibility information,
etc.) and product registration, visit denonpro.com.
3
Features
Front Panel
1
2
3
7
8 9
10
11
5
6
4
1. Power Switch: Use this switch to power DN-312X on or off.
2. Power Light: This light illuminates when DN-312X is powered on.
3. Mic In Level: Turn these knobs to set the input level of the corresponding mic/line inputs
(Channels 1–6).
4. Stereo In Level: Turn these knobs to set the input level of the corresponding line inputs
(Channels 7/8–11/12).
5. Signal (Sig) Lights: Indicates that the channel’s incoming audio signal is within an optimal
range.
6. Mic Level: Turn this knob to set the input level of the output. Use the Mic Monitor Mic
On Off/ button to enable to disable it.
7. Mic On/Off: Press this to turn enable or disable the Mic Monitor output. When the button
is depressed (in the down position), the signal from the mic/line inputs (Channels 1–6) will
be sent to the Mic Monitor output, and the Line Outs will be disabled. When the button is
raised (in the up position), the Mic Monitor output will be disabled, and all channels will be
sent to the Line Outs.
8. EQ: Turn these knobs to increase (“boost”) or reduce (“cut”) the amount of bass frequencies
(Low), mid-range frequencies (Mid), and treble frequencies (High) of the main mix.
9. Mono Level: Turn this knob to adjust the level of the Mono Out.
10. Master Level: Turn this knob to adjust the level of the Line Outs, Mono Out, and Rec Out.
11. Level Meters: These lights indicate the audio level of the Line Outs, Mono Out, and Rec
Out. The Clip light can light up occasionally, but if it happens too often, reduce the volume
of the mix and/or individual channels.


Product specificaties

Merk: Denon
Categorie: Mengpaneel
Model: DN-312X

Heb je hulp nodig?

Als je hulp nodig hebt met Denon DN-312X stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Mengpaneel Denon

Handleiding Mengpaneel

Nieuwste handleidingen voor Mengpaneel