Danfoss RET2001 Thermostaat Handleiding

Danfoss Thermostaat RET2001 Thermostaat

Lees hieronder de 📖 handleiding in het Nederlandse voor Danfoss RET2001 Thermostaat (1 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 197 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Easy User Guide
RET2001
Digital Room Thermostat
BC33737015670100en-000101 | 087R1001 www.danfoss.com
Introduction
Fitting room thermostats to control room temperatures can be the simp-
lest way to save energy and increase comfort. Room thermostats control
the temperature at which your heating system operates, and in doing so
helps save energy by cutting down on wasteful overheating.
Fitting room thermostats also cuts down on heating costs because by
turning down the setting by just 1 °C you can cut the heating fuel bill by
up to 10 %. Reducing wasteful overheating also helps the environment
by reducing harmful emissions.
What is a room thermostat?
The thermostat controls the heating in your home by keeping it at the
temperature you have set. Room thermostats switch off the heat when
the temperature reaches a set point, and switch it on when it falls below.
The heating will not come on if the room temperature is above the room
thermostat set temperature.
Remember that turning the thermostat up will not heat the room any
faster. The higher the thermostat setting the more gas you will use.
Setting the Temperature
a. Press or at any time to change the desired temperature value.
SET is shown in the display.
b. When releasing the or , the display returns to showing the
actual temperature.
Holiday Mode
Holiday Mode selects the Holiday comfort temperature typically when
the home is unoccupied.
a. Press M to enter into Holiday mode and will be displayed.
b. Holiday mode temperature can be set in User settings, option 07.
c. Press M again to exit Holiday mode.
RET2001 Thermostat
Display and Navigation Details
Symbols Function description Symbols Function description
Parameter number
in setup Holiday mode
Room temperature RF Status
(RET2001RF only)
Temperature indication
Battery low indicator
(RET2001B and
RET2001RF)
SET
Set temperature Power on/off
Heating active MMode change / option
setting
Frost protect active Temperature / option
setting selectors
© Danfoss | FEC | 03.2020 087R1001
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed ma-
terial. Danfoss reserves the right to alter its products without notice. This also applies to products already
on order provided that such alterations can be made without subsequential changes being necessary in
specifications already agreed.
All trademarks in this material are property of the respective companies. Danfoss and the Danfoss logo-
type are trademarks of Danfoss A/S. All rights reserved.
Danfoss A/S
Heating Segment • danfoss.com • +45 7488 2222 • E-mail: heating@danfoss.com
Frost Protection Temperature and Reset
a. You can switch the thermostat OFF (Standby) by alternately pres-
sing . In OFF (Standby) mode the thermostat is set to a Frost Pro-
tection temperature setting and will switch On only if the measured
temperature falls below this temperature (5 °C by default).
b. The frost protect icon and current temperature will be display.
c. At this point if button is pressed for 10 seconds Continuously then
the thermostat will be reset.
User Settings
a. Press M button for 6 seconds to enter the parameter setting mode.
Press M for parameter selection and set the parameter range
via or . Complete all adjustments.
b. To exit press upper part of setting ring, or it will automatically exit
after 20 seconds when no button is pressed.
No. Parameter settings Settings range Default
02 Heat control mode 01: On/off load compensation
02: On/off standard 01
04 Temperature limit high Between low (05) and 35 °C 35 °C
05 Temperature limit low Between 5 °C and high (04) 5 °C
06 Frost protect temperature Between 5 °C and 15 °C 5 °C
07 Holiday mode temperature Between low (05) and high (04) 18 °C
10 RF Pairing
(RET2001RF only)
00: RF pairing mode off
01: RF pairing mode on 00


Product specificaties

Merk: Danfoss
Categorie: Thermostaat
Model: RET2001 Thermostaat

Vragen van gebruikers

Kunt u me ook het aansluitschema van de ret2001 toesturen. waar moet welke kleur draag ?? m.vr.gr. monique van dijck

  monique van dijck - 8 November 2024

Heb je hulp nodig?

Als je hulp nodig hebt met Danfoss RET2001 Thermostaat stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Thermostaat Danfoss

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat