Danfoss TP5001Range gebruik Handleiding

Danfoss Thermostaat TP5001Range gebruik

Lees hieronder de 📖 handleiding in het Nederlandse voor Danfoss TP5001Range gebruik (104 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 55 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/104

TP5001 Range

Electronic 5/2 day programmable room thermostat

Mains, Battery and RF versions

User Instructions

Bedienungsanleitung

Instrucciones del usuario

Brugervejledning

Instructies voor gebruik

Instructions d’utilisateur

Istruzioni per l’utente

An introduction to your programmable room thermostat

Your programmable room thermostat allows you to programme

di erent temperatures at di erent time periods. You can programme

one set of times and temperatures for week days with a di erent set of

temperatures for weekend days, this is referred to as 5/2 day operation.

The thermostat can also be set up by your installer to provide one set

of times and temperatures that are repeated each day of the week. This

is referred to as 24 hour operation.

The thermostat can also be set by you to provide two di erent

programming blocks which can then be assigned to any day of the

week, this is referred to as A/B programme operation.

All thermostats can be set by your installer to provide up 2, 4 or 6 time

and temperature settings each day.

All thermostats feature useful overrides, including a programmable

frost setting.

Your thermostat has some advanced features which the installer will

set-up if they are required. There are also a number of advanced features

which can be set up by you. These advanced settings alter the way that

your thermostat operates, some also a ect the programming functions

and the user overrides. Please read the User Advanced Programming

instructions before programming the unit (see page 10).

Preset programmes

Your TP5001 comes ready programmed with a set of operating times and

temperatures which suit most people. Please remember that some of the

options available will depend on how the installer has set up the unit.

User Instructions

Weekdays (Mon-Fri) Weekend (Sat-Sun)

Event Time Temp. °C Event Time Temp. °C

1 06:30 20 1 07:30 20

2 08:30 15 2 09:30 20

3 11:30 20 3 11:30 20

4 13:30 15 4 13:30 20

5 16:30 21 5 16:30 21

6 22:30 15 6 22:30 15

Note: these are also times for Block

“A” programmes

Note: these are also times for Block “B”

programmes

Note: If set up for 4 events per day, events 3 & 4 are skipped. If set up

for 2 events per day, events 2, 3, 4 & 5 are skipped. In both cases the

events are re-numbered.

Before you start

Open the  ap on the front of the programmer and

press the RESET button with a non-metallic object

until the display goes blank. This will ensure that

the factory programmes are set and that the micro-

computer in the product is operating correctly.

Customising the display

For the sake of clarity, the instructions assume that the display setting

uses a 24 hour clock, °C and that days of the week are numbered 1-7,

(where 1 is Monday). All of these settings can be personalised after the

thermostat has been programmed, see pages 8 and 9.

Setting the correct date and time

Your TP5001 incorporates a real time clock with calendar function that

automatically changes time in both Spring and Autumn. The time and

date is set in the factory for the CET time zone, and does not normally

require adjustment. If you live in another time zone refer to “Time zone

o set” on page 11. However, should it be found necessary to adjust

time or date for any other reason refer to the following instructions.

User Instructions

RESET

Setting the date

Press and hold Λ and PROG for 3 seconds, to

display date in dd/mm/yy format.

Product specificaties

Merk:	Danfoss
Categorie:	Thermostaat
Model:	TP5001Range gebruik

Heb je hulp nodig?

Als je hulp nodig hebt met Danfoss TP5001Range gebruik stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Thermostaat Danfoss

Danfoss TP5001Range gebruik Handleiding

27 Mei 2023

Danfoss RA 2000 series Handleiding

27 Mei 2023

Danfoss TP5000 plus RF Handleiding

27 Mei 2023

Danfoss RET 230 HCW-3 installatie Handleiding

27 Mei 2023

Danfoss TP9000 Si Handleiding

27 Mei 2023

Danfoss TP5000 Si Handleiding

27 Mei 2023

Danfoss TP5001M Handleiding

27 Mei 2023

Danfoss TP5001Range installatie Handleiding

27 Mei 2023

Danfoss Icon Display 24V Handleiding

27 Mei 2023

Danfoss ORT-10 Handleiding

4 Juni 2023

Handleiding Thermostaat

Nieuwste handleidingen voor Thermostaat

Nest Learning Thermostat 4th Gen Handleiding

12 November 2024

Braeburn 2220 Handleiding

11 November 2024

Braeburn 2000NC Handleiding

11 November 2024

Braeburn 505 Handleiding

11 November 2024

Braeburn 500 Handleiding

11 November 2024

Vemer ThermoPro Wi-Fi Handleiding

6 November 2024

Heatit Z-Temp3 Handleiding

5 November 2024

Ambiano GT-RT-01 Handleiding

18 Oktober 2024

Siemens RDG100T Handleiding

15 Oktober 2024

Oreg AT90E Handleiding

30 September 2024