Danfoss Icon - 230 V Programmable Room Thermostat Thermostaat Handleiding

Danfoss Thermostaat Icon - 230 V Programmable Room Thermostat Thermostaat

Lees hieronder de 📖 handleiding in het Nederlandse voor Danfoss Icon - 230 V Programmable Room Thermostat Thermostaat (6 pagina's) in de categorie Thermostaat. Deze handleiding was nuttig voor 69 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

VUMBA102 © Danfoss | FHH | 2016.08 | 1

User Guide

Danfoss Icon™ Programmable

Room Thermostat, 230 V

Danfoss Icon™ Programmable is a room thermostat especially designed for ﬂoor heating systems.

Danfoss Icon™ Programmable is very easy to use:

• Seven pre-deﬁned and ﬁxed heating programs makes it easy to ﬁnd a schedule that suits your

personal needs.

• An easy-to-use interface with icons for diﬀerent modes makes it simple to override a program with-

out changing the program settings.

Introduction

Know your

Danfoss Icon™

Programmable

Wake up the thermostat

Danfoss Icon™ Programmable is designed to blend in with any interior.

When not in use, the display turns oﬀ and becomes virtually invisible.

When the screen is touched, the display comes to life instantly and

displays the current room temperature for two seconds, then switches

to Home Screen.

The Heating icon is displayed, if the thermostat has turned on the

heat.

The Cooling icon is displayed, if the thermostat has turned on the

cooling (only if cooling is enabled in your system).

The Home Screen

On the Home Screen the icon for active mode is fully lit,

e.g. At Home .

Icons for inactive modes are dimmed down, but still visible..

Activate another mode by touching the icon.

If no icon is touched, the screen will go to sleep after ten seconds.

Home Screen icons

At Home: Touch icon to set temperature for the At Home period (your comfort temperature).

Away: Touch icon to set temperature for the Away period (your economy temperature).

Asleep: Touch icon to set temperature for the Asleep period (your comfort temperature at

night).

Settings: Touch icon to choose program and change settings.

Return to the previous screen/setting.

VUMBA102

2 | © Danfoss | FHH | 2016.08

User Guide Danfoss Icon™ Programmable Room Sensor 230 V

How to use

Danfoss Icon™

Programmable

Danfoss Icon™ Programmable is easy and intuitive to use:

• You change value with or .

• You scroll between menus and programs with or .

• You conﬁrm with . The screen is ﬂashing shortly to indicate that the new setting is active.

Forecast feature

Danfoss Icon™ Programmable has an automatic Forecast feature, where the thermostat during the ﬁrst

two weeks adapts itself to the characteristics of the room.

It means that Danfoss Icon™ Programmable learns when to start heating up in order to reach the

desired At Home temperature on time (re-heating times can be very diﬀerent from room to room).

This is especially important with underﬂoor heating in heavy ﬂoor constructions, because the ﬂoor

concrete need to be heated, and it takes time.

Example:

Program P4 is chosen.

Away temperature from 09:00 is set to 18° C.

At Home temperature from 17:00 is set to 21° C.

21°

18°

17:0009:00

15:20

Forecast says: Start heating now!

The Forecast feature has learned that heating must start up at 15:20 in order to reach the At Home

temperature of 21° C at 17:00.

Recommendations

on set-back

temperatures

For a traditional heavy ﬂoor heating system with pipes embedded in concrete, Danfoss recommends

Away and Asleep (set-back) temperatures a few degrees lower than the At Home (comfort) tempera-

ture. A larger temperature diﬀerence will be “overruled” by the Forecast feature.

With a light (dry) ﬂoor construction cooling / heating time is shorter, and you might choose a larger

temperature diﬀerence.

Heavy ﬂoor heating construction Light ﬂoor heating construction

VUMBA102 © Danfoss | FHH | 2016.08 | 3

User Guide Danfoss Icon™ Programmable Room Sensor 230 V

At Home mode

Touch to activate the At Home mode.

Touch again to show the desired At Home temperature.

Default temperature is 21° C.

Change the desired temperature by touching or .

Conﬁrm your settings by touching .

Away mode

Touch to activate the Away mode.

Touch again to show the desired Away temperature.

Default temperature is 17° C.

Change the desired temperature by touching or .

Conﬁrm your settings by touching .

Asleep mode

Touch to activate the Asleep mode.

Touch again to show the desired Asleep temperature.

Default temperature is 19° C.

Change the desired temperature by touching or .

Conﬁrm your settings by touching .

Settings mode

Touch to open the Settings menu.

Toggle between Settings menus by touching or .

Conﬁrm your choice by touching .

Note! Settings are usually made by the installer, and you will normally not

have any need for changing the settings.

How to use

the modes

Reset to default

factory settings

Press and simultaneously for at least 3 seconds to reset Danfoss Icon™ Programmable to the

default factory settings.

The display toggles between and .

Conﬁrm by touching .

Product specificaties

Merk:	Danfoss
Categorie:	Thermostaat
Model:	Icon - 230 V Programmable Room Thermostat Thermostaat

Heb je hulp nodig?

Als je hulp nodig hebt met Danfoss Icon - 230 V Programmable Room Thermostat Thermostaat stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag