CRUX WVITY-01 Handleiding

CRUX Niet gecategoriseerd WVITY-01

Lees hieronder de 📖 handleiding in het Nederlandse voor CRUX WVITY-01 (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/6
R
INTERFACING SOLUTIONS
A/V
SERIES
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.031221
WVITY-01
Wi Connectivity Integration
for Select Lexus, Scion and Toyota Vehicles
1 of 6
- Enables wireless (Wi-Fi) Audio/Video mirroring from mobile devices to the OEM screen.
- Provides an audio/video input which can also be used to add a camera.
- Includes a USB input to play audio and video les.
- Provides a virtual remote control via a smartphone wi connection.
- Dual band (5GHz and 2.4GHz) Wi capability for clear connection.
- Includes HMDI output for high quality video.
- Works with Facetime, Maps, Skype, YouTube, and other apps.
PRODUCT FEATURES:
PARTS INCLUDED:
WORKS WITH:
WVITY-01 Vehicle Harness WVI-H Module Power Harness
Dual Antennas WiFi AV Out Harness AV In / Video Out Harness
IR Extension
iOS 7 and Newer OS 4.2 and Newer
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.0312212 of 6
WVITY-01
Wi Connectivity Integration
for Select Lexus, Scion and Toyota Vehicles
Wi-Fi
INTERFACE
SEEK
AUDIO
TRACK
PWR VOL
2-PIN
SWC PLUGS
ORANGE/WHITE
WIRE
GROUND
OPTIONAL SWITCH
(Not Included) This toggle switch option
is for vehicles that do not
have Steering Wheel Controls.
28-PIN
16-PIN
10-PIN
1 2 3
ON
1 2 3
ON
DIP SWITCHES
SHOULD
BE ALL “OFF”
HDMI OUTPUT
A/V INPUT
BLUE = A/V TRIGGER*
RED = +12V ACC
BLACK = GROUND
*Connect BLUE A/V Trigger
to +12V to toggle A/V INPUT
A/V Extension
Cable
Video Out
(to extension monitors)
Video Input (or Camera)
Right Audio Input
Left Audio Input
USB Input
INSTALLATION DIAGRAM:
NOTE: The 16-Pin connector is not available on some newer vehicles. You can leave it disconnected if your
vehicle does not have a 16-Pin connector.
INSTALLATION INSTRUCTIONS:
THE AV INTERFACE:
1. Remove the factory radio from the dashboard.
Note: DO NOT disconnect the airbag connector.
2. Remove the factory connectors from behind the factory radio.
3. Mate the T-Harness connecons to the factory connectors. (Make sure all connectors are properly seated
into the interface and into the radio.) (JBL Radios see page 3)
4. Connect the Orange/White wire to your corresponding SWC type. (9-Buon or 5-Buon)
R
INTERFACING SOLUTIONS
A/V
SERIES
1. Connect the 18-Pin power/video cable to the Wi-Fi Interface module.
2. Connect the antenna leads to the module.
3. Connect the RED power lead to +12V ACC and the BLACK wire to Ground.
4. Connect the BLUE A/V Input wire to +12V to trigger the oponal A/V input feature. The video input can also be
connected to a camera source instead. A toggle switch (not included), wired between the BLUE wire and +12V
can be used to switch ON or OFF the A/V input feature.
5. If the USB input feature will be used, you can use the virtual remote control on your smartphone to control the
USB funcons. See VIRTUAL REMOTE secon for details. Extended a USB cable to an easily accessible locaon.
6. Plug in the Composite RCA output of the WVI-H harness to the WVITY-01 AV input.
7. Test for funconality.
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.0312213 of 6
WVITY-01
Wi Connectivity Integration
for Select Lexus, Scion and Toyota Vehicles
SETTING YOUR DEVICE:
With the WVI-H module ON and READY:
For iOS devices:
Open sengs > Select > UnderWi-Fi
‘Choose Network’ “Crux WiFi ***” Select
Aer connecng to Crux Wi, select
“SCREEN MIRRORING” from the Control
Center and tap Crux Wi ***. To access
Control Center, on iPhone X, pull down
from the upper right corner of the screen,
on other iPhone models, pull up from the
boom of the screen.
THE WIFI INTERFACE:
10-PIN JBL RADIOS
Vehicles equipped with a JBL system will not have a 10-Pin connector, you will need to cut three wires from the
10-pin male connector (with female pins) of the WVITY-01 T-harness and connect as follows:
R
INTERFACING SOLUTIONS
A/V
SERIES
NOTES:
1. Does not support Nelix and any DRM protected
les on iOS devices due to Restricons by Apple.
RED = to 12V ACC
YELLOW = to 12V Constant
BLACK = to Ground

Product specificaties

Merk: CRUX
Categorie: Niet gecategoriseerd
Model: WVITY-01

Heb je hulp nodig?

Als je hulp nodig hebt met CRUX WVITY-01 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd CRUX

CRUX

CRUX ACPLR-01 Handleiding

12 November 2024
CRUX

CRUX ACPMB-50W Handleiding

12 November 2024
CRUX

CRUX ACPBM-77Z Handleiding

12 November 2024
CRUX

CRUX ACPAD-81Y Handleiding

12 November 2024
CRUX

CRUX ACPAD-01 Handleiding

12 November 2024
CRUX

CRUX ACPBM-77X Handleiding

12 November 2024
CRUX

CRUX ACPLX-12XW Handleiding

12 November 2024
CRUX

CRUX ACPMB-45W Handleiding

12 November 2024
CRUX

CRUX ACPBM-77Y Handleiding

12 November 2024
CRUX

CRUX DKGM-16B Handleiding

5 November 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

NuPrime

NuPrime Pure AC-6 Handleiding

28 Januari 2025
Marklin

Marklin 7556 Handleiding

28 Januari 2025
Marklin

Marklin 78151 Handleiding

28 Januari 2025
Marklin

Marklin 7557 Handleiding

28 Januari 2025
Marklin

Marklin 72240 Handleiding

28 Januari 2025
Marklin

Marklin 5654 Handleiding

28 Januari 2025
Marklin

Marklin 59079 Handleiding

28 Januari 2025
Marklin

Marklin 73302 Handleiding

28 Januari 2025
Marklin

Marklin 7226 Handleiding

28 Januari 2025
Marklin

Marklin 72270 Handleiding

28 Januari 2025