CRUX WVICH-03 Handleiding

CRUX Niet gecategoriseerd WVICH-03

Lees hieronder de 📖 handleiding in het Nederlandse voor CRUX WVICH-03 (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 10 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/5
R
INTERFACING SOLUTIONS
A/V
SERIES
WVI-H WiFi Module Extension AV Cable Power Harness
Dual Antennas WiFi AV Out Harness AV In / Video Out Harness
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.0312211 of 5
- Enables wireless (Wi-Fi) Audio/Video mirroring from mobile devices to the OEM screen.
- Provides an audio/video input which can also be used to add a camera.
- Includes a USB input to play audio and video les.
- Provides a virtual remote control via a smartphone wi connection.
- Dual band (5GHz and 2.4GHz) Wi capability for clear connection.
- Includes HMDI output for high quality video.
- Works with Facetime, Maps, Skype, YouTube, and other apps.
PRODUCT FEATURES:
PARTS INCLUDED:
WVICH-03B CAN Module WVICH-03B A/V Harness
WVICH-03B
Wi Connectivity Integration and Audio Video Interface
for Select Dodge, Jeep & RAM Vehicles 2013-2015
WORKS WITH:
iOS 7 and newer OS 4.2 and newer
R
INTERFACING SOLUTIONS
A/V
SERIES
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.0312212 of 5
INSTALLATION DIAGRAM:
INSTALLATION INSTRUCTIONS:
THE AV INTERFACE:
1. Remove the factory radio from the dashboard.
2. Unplug the factory connectors from behind the factory radio.
3. Mate the WVICH-03B T-Harness connecons to the factory connectors. (Make sure all connectors are
properly seated into the interface and into the radio.)
4. On the CAN Module, set DIP switch number 4 to ON to enable AV Input.
5. Switch to the new AV input by pressing the BACK buon on the radio. If the radio does not have a BACK
buon use the GREEN wire opon to toggle the AV source by connecng it to +12V. We recommend using a
toggle switch to use this feature. (See page 3)
TO FACTORY
RADIO
TO FACTORY
HARNESS
CAN
MODULE
A/V Module
GREEN Wire
(non permanent VIM)
See below step 5
Wi-Fi
INTERFACE
HDMI OUTPUT
A/V INPUT
BLUE = A/V TRIGGER*
RED = +12V ACC
BLACK = GROUND
*Connect BLUE A/V Trigger
to +12V to toggle A/V INPUT
A/V Extension
Cable
Video Out
(to extension monitors)
Video Input (or Camera)
Right Audio Input
Left Audio Input
USB Input
WVICH-03B
Wi Connectivity Integration and Audio Video Interface
for Select Dodge, Jeep & RAM Vehicles 2013-2015
1. Connect the 18-Pin power/video cable to the Wi-Fi Interface module.
2. Connect the antenna leads to the module.
3. Connect the RED power lead to +12V ACC and the BLACK wire to Ground.
4. Connect the BLUE A/V Input wire to +12V to trigger the oponal A/V input feature. The video input can
also be connected to a camera source instead. A toggle switch (not included), wired between the BLUE
wire and +12V can be used to switch ON or OFF the A/V input feature.
5. If the USB input feature will be used, you can use the virtual remote control on your smartphone to
control the USB funcons. See VIRTUAL REMOTE secon for details. Extended a USB cable to an easily
accessible locaon.
6. Plug in the Composite RCA output of the WVI-H harness to the WVICH-03B AV input.
7. Switch to the new AV input by pressing the BACK buon on the radio or the middle buon on the SWC.
(See below)
8. Test the interface and re-install the radio into the dash.
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.0312213 of 5
THE WIFI INTERFACE:
WVICH-03B
Wi Connectivity Integration and Audio Video Interface
for Select Dodge, Jeep & RAM Vehicles 2013-2015
R
INTERFACING SOLUTIONS
A/V
SERIES
DIP SWITCH SETTINGS ON THE MODULES:
Make sure the DIP#4 is set to the ON posion. This sets the programming to the vehicle.
1 2 3 4 5 6
ON DIP 1 ON VIM Enable OFF VIM Disable
DIP 2 OFF Not Used
DIP 3 OFF Not Used
DIP 4 ON AV Input Enable OFF AV Input Disable
DIP 5 OFF CAN Terminaon Car Side
DIP 6 OFF CAN Terminaon Radio Side
NOTE:
1. Set DIP#6 to ON if you experience the radio freezing or not responding properly.
SWITCHING TO THE A/V INPUT
Press the BACK buon once to switch to the AV source.
For vehicles without a BACK buon, user has the opon of
using a toggle switch between the GREEN wire and +12V to
switch to AV mode. Make sure to turn DIP# 1 to OFF.
NOTE: If there is no video signal owing through the
AV input, there will be a BLUE screen present. To exit,
simply press the BACK or turn o the toggle switch.
CAN
MODULE
A/V Module
GREEN Wire
(non permanent VIM)
+12V

Product specificaties

Merk: CRUX
Categorie: Niet gecategoriseerd
Model: WVICH-03

Heb je hulp nodig?

Als je hulp nodig hebt met CRUX WVICH-03 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd CRUX

CRUX

CRUX ACPLR-01 Handleiding

12 November 2024
CRUX

CRUX ACPMB-50W Handleiding

12 November 2024
CRUX

CRUX ACPBM-77Z Handleiding

12 November 2024
CRUX

CRUX ACPAD-81Y Handleiding

12 November 2024
CRUX

CRUX ACPAD-01 Handleiding

12 November 2024
CRUX

CRUX ACPBM-77X Handleiding

12 November 2024
CRUX

CRUX ACPLX-12XW Handleiding

12 November 2024
CRUX

CRUX ACPMB-45W Handleiding

12 November 2024
CRUX

CRUX ACPBM-77Y Handleiding

12 November 2024
CRUX

CRUX DKGM-16B Handleiding

5 November 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Kolcraft

Kolcraft MLB Chicago Cubs Handleiding

26 November 2024
Kolcraft

Kolcraft MLB New York Yankees Handleiding

26 November 2024
Kolcraft

Kolcraft MLB San Francisco Giants Handleiding

26 November 2024
Kolcraft

Kolcraft MLB St. Louis Cardinals Handleiding

26 November 2024
Nedis

Nedis POCO106 Handleiding

26 November 2024
Nedis

Nedis BTSM1GY Handleiding

26 November 2024
Turbosound

Turbosound TPOLEAJ-01 Handleiding

26 November 2024
Turbosound

Turbosound TSTAND-01 Handleiding

26 November 2024
IFM

IFM TAD981 Handleiding

26 November 2024
IFM

IFM TAD961 Handleiding

26 November 2024