CRUX SWRGM-49L Handleiding


Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor CRUX SWRGM-49L (4 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/4
Crux Interfacing Solutions โ€ข Chatsworth, CA 91311
phone: (818) 609-9299 โ€ข fax: (818) 996-8188 โ€ข www.cruxinterfacing.com
rev.0717201 of 4
RAD IO REP LA CEMENT
SWC RET ENTIO N
+
R
INTERFACING SOLUTIONS
- Retains factory features in select GM LAN V2 (LIN) Bus vehicles while functioning with an aftermarket radio.
- Retains chime functions.
- Retains factory Steering Wheel Controls.
- Provides Factory Rear Seat Entertainment activation.
- Retains RAP (Retained Accessory Power).
- Includes factory backup camera connection for the IO3 system. (vehicles with IO4, IO5 & IO6 systems can be hard
wired to retain the OEM camera. See page 2)
PRODUCT FEATURES:
PARTS INCLUDED:
INSTALLATION DIAGRAM:
SWRGM-49L MODULE SWRGM-49L HARNESS SWC CABLE ANTENNA ADAPTER
AFTERMARKET
RADIO
Reverse Red/White
๎˜ฏ๎ฏ๎ฏ๎žต๎ต๎๎ถ๎œ‚๎žŸ๎ฝ๎ถ๎˜ƒ๎ฅพ๎จฝ๎ฅฟ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎™‹๎žŒ๎œ‚๎ถ๎๎œž
๎จฝ๎งญ๎งฎ๎™ณ๎˜ƒ๎˜’๎ฝ๎ถ๎ž๎žš๎œ‚๎ถ๎žš๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎™บ๎œž๎ฏ๎ฏ๎ฝ๎Ÿ
๎จฝ๎งญ๎งฎ๎™ณ๎˜ƒ๎˜„๎˜’๎˜’๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎™š๎œž๎œš
๎˜ง๎žŒ๎ฝ๎žต๎ถ๎œš๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜‘๎ฏ๎œ‚๎œ๎ฌ
๎˜œ๎ถ๎žš๎œž๎žŒ๎žš๎œ‚๎๎ถ๎ต๎œž๎ถ๎žš๎˜ƒ๎™ค๎žต๎žŒ๎ถ๎˜ƒ๎™‹๎ถ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜‘๎ฏ๎žต๎œž๎ฅฌ๎™ด๎š๎๎žš๎œž
๎™š๎๎๎š๎žš๎˜ƒ๎˜ฆ๎žŒ๎ฝ๎ถ๎žš๎˜ƒ๎ฅพ๎จฝ๎ฅฟ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ง๎žŒ๎œ‚๎Ÿ‡
๎™š๎๎๎š๎žš๎˜ƒ๎˜ฆ๎žŒ๎ฝ๎ถ๎žš๎˜ƒ๎ฅพ๎ฅฒ๎ฅฟ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ง๎žŒ๎œ‚๎Ÿ‡๎ฅฌ๎˜‘๎ฏ๎œ‚๎œ๎ฌ
๎˜พ๎œž๎Œ๎˜ƒ๎˜ฆ๎žŒ๎ฝ๎ถ๎žš๎˜ƒ๎ฅพ๎จฝ๎ฅฟ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎™ด๎š๎๎žš๎œž
๎˜พ๎œž๎Œ๎˜ƒ๎˜ฆ๎žŒ๎ฝ๎ถ๎žš๎˜ƒ๎ฅพ๎ฅฒ๎ฅฟ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎™ด๎š๎๎žš๎œž๎ฅฌ๎˜‘๎ฏ๎œ‚๎œ๎ฌ
๎™š๎๎๎š๎žš๎˜ƒ๎™š๎œž๎œ‚๎žŒ๎˜ƒ๎ฅพ๎จฝ๎ฅฟ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎™ณ๎๎ฝ๎ฏ๎œž๎žš
๎™š๎๎๎š๎žš๎˜ƒ๎™š๎œž๎œ‚๎žŒ๎˜ƒ๎ฅพ๎ฅฒ๎ฅฟ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎™ณ๎๎ฝ๎ฏ๎œž๎žš๎ฅฌ๎˜‘๎ฏ๎œ‚๎œ๎ฌ
๎˜พ๎œž๎Œ๎˜ƒ๎™š๎œž๎œ‚๎žŒ๎˜ƒ๎ฅพ๎จฝ๎ฅฟ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ง๎žŒ๎œž๎œž๎ถ
๎˜พ๎œž๎Œ๎˜ƒ๎™š๎œž๎œ‚๎žŒ๎˜ƒ๎ฅพ๎ฅฒ๎ฅฟ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ƒ๎˜ง๎žŒ๎œž๎œž๎ถ๎ฅฌ๎˜‘๎ฏ๎œ‚๎œ๎ฌ
TO FACTORY
HARNESS
16-Pin Black
Connector
16-Pin Green
Connector
20-Pin Gray
Connector
INTERFACING SOLUTIONS
4-Pin
Connector
Cap or insulate if
not being used
Kenwood/JVC (BLUE / YELLOW) Insulate with tape
if not being used
3.5MM SWC CABLE
Plug in the 3.5MM SWC cable to the 4-pin port
on the module. See โ€œDIP SWITCH SETTINGSโ€ section.
1 2 3 4
ON
AFTERMARKET
RADIO SELECTOR
(See Chart)
1 2 3 4
ON
Audio Input
Rear Camera (IO3)
Chime volume
adjustment
LIN Bus (GREEN)
Antenna Adapter
(Included)
SWRGM-49L
Radio Replacement Interface with Steering Wheel Control
Retention for GM LAN v2 (LIN) Bus Vehicles 2014 -2018
Crux Interfacing Solutions โ€ข Chatsworth, CA 91311
phone: (818) 609-9299 โ€ข fax: (818) 996-8188 โ€ข www.cruxinterfacing.com
rev.071720
SWRGM-49L
Radio Replacement Interface with Steering Wheel Control
Retention for GM LAN v2 (LIN) Bus Vehicles 2014 -2018
2 of 4
RAD IO REP LA CEMENT
SWC RET ENTIO N
+
R
INTERFACING SOLUTIONS
BOSE AMPLIFIER BYPASS:
For vehicles equipped with a factory Bose ampli๎œฎer, extend the speaker wires of the SWRGM-49L harness and
connect to the Bose ampli๎œฎer output wires. Locate the Bose ampli๎œฎer to ๎œฎnd out how much speaker wires is
neccessary. The Bose ampli๎œฎer is located as follows: (NOTE: Bose ampli๎œฎers are commonly found in the loca๎žŸons listed
below but the manufacturer can mount it elsewhere. Installer should verify the loca๎žŸon before installa๎žŸon.)
Trucks = Center of the rear wall / SUVs = Center console or in the cargo space / Sedans = Rear deck or Trunk area
Pinout for the 8 and 16 pin OEM Bose ampli๎œฎer connectors:
14
8 5
1
8
9
16
Pin # Wire Color Descrip๏ฟฝon
1 Dark Blue / Grey Subwoofer +
2 Yellow Right Front Speaker +
3 Dark Blue Le๏ฟฝ Front Speaker +
4 Red / Yellow Constant +12V
5 Grey / Black Subwoofer -
6 Yellow / Black Right Front Speaker -
7 Brown / Dark Blue Le๏ฟฝ Front Speaker -
8 Black Ground
Pin # Wire Color Descrip๏ฟฝon
4 Brown / Light Green Right Front Tweeter +
5 Yellow / Dark Blue Tweeter +Le๏ฟฝ Front
6 White Right Rear Speaker +
7 Light Green Le๏ฟฝ Rear Speaker +
12 Purple / Brown Right Front Tweeter -
13 Yellow / Grey Tweeter - Le๏ฟฝ Front
14 Dark Blue / Black Right Rear Speaker -
15 Light Green / Black Le๏ฟฝ Rear Speaker -
The SWRGM-49L is prewired with an RCA connector to retain the OEM camera
on vehicles with a IO3 system. To retain the OEM camera on IO4, IO5 and IO6
systems, you will need connect an RCA cable to the 12-pin connector on the
HMI module found either by the passenger kick panel or behind the glove box.
Connect the RCA as follows:
HMI Connector
PIN 5 = Gray/Yellow to RCA posi๎žŸve
PIN 6 = White/Blue to RCA shield
We recommend soldering and using heat shrink tubing these wires for a secure
connec๎žŸon.
Pin 6 Pin 5
White/Blue Gray/Yellow
OEM CAMERA RETENTION:
The SWRGM-49L has a poten๎žŸometer to adjust the chime
volume. It is set at half way by default. To adjust the volume,
simply use a suitable screw driver and turn the poten๎žŸometer
clockwise to increase the volume and counter-clockwise to
decrease the volume.
Chime
Volume
Adjustment
CHIME VOLUME ADJUSTMENT:
INSTALLATION INSTRUCTIONS:
1. Connect the a๎Œermarket radioโ€™s
power/speaker harness to the
SWRGM-49L T-Harness using the
Installa๎žŸon Diagram on page 1. Use
good quality crimp caps or bu๎žฉ splice
for a secure connec๎žŸon. Solder and
heat shrinking the connec๎žŸons is highly
recommended.
2. Carefully remove the radio trim with a plas๎žŸc
pry tool and pull outward.
3. Remove the radio bezel by removing the
4 screws on the corners.
4. Unplug the GREEN and GRAY
connectors from the headunit.
5. Plug the GREEN and GRAY connectors to the
SWRGM-49L T-Harness.
6. Use the supplied antenna adapter to plug
between the OE antenna connector and
a๎Œermarket radio antenna port.
7. Remove plas๎žŸc trim under the
steering wheel column and locate a
GREEN/BLACK wire in the bundle. Tap
the GREEN/BLACK from the SWC Cable.
We recommend soldering the wires
together for a reliable connec๎žŸon.
8. Use a dash kit (not included) for a clean
install. Test the radio for func๎žŸonality. Test
the chime and Retained Accessory Power
(RAP) func๎žŸons. Reverse the process to
install the new a๎Œermarket radio.
Crux Interfacing Solutions โ€ข Chatsworth, CA 91311
phone: (818) 609-9299 โ€ข fax: (818) 996-8188 โ€ข www.cruxinterfacing.com
rev.071720
SWRGM-49L
Radio Replacement Interface with Steering Wheel Control
Retention for GM LAN v2 (LIN) Bus Vehicles 2014 -2018
3 of 4
RAD IO REP LA CEMENT
SWC RET ENTIO N
+
R
INTERFACING SOLUTIONS


Product specificaties

Merk: CRUX
Categorie: Niet gecategoriseerd
Model: SWRGM-49L

Heb je hulp nodig?

Als je hulp nodig hebt met CRUX SWRGM-49L stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd CRUX

CRUX

CRUX ACPLR-01 Handleiding

12 November 2024
CRUX

CRUX ACPMB-50W Handleiding

12 November 2024
CRUX

CRUX ACPBM-77Z Handleiding

12 November 2024
CRUX

CRUX ACPAD-81Y Handleiding

12 November 2024
CRUX

CRUX ACPAD-01 Handleiding

12 November 2024
CRUX

CRUX ACPBM-77X Handleiding

12 November 2024
CRUX

CRUX ACPLX-12XW Handleiding

12 November 2024
CRUX

CRUX ACPMB-45W Handleiding

12 November 2024
CRUX

CRUX ACPBM-77Y Handleiding

12 November 2024
CRUX

CRUX DKGM-16B Handleiding

5 November 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd