Crown 135MA Handleiding

Crown Mengpaneel 135MA

Lees hieronder de 📖 handleiding in het Nederlandse voor Crown 135MA (24 pagina's) in de categorie Mengpaneel. Deze handleiding was nuttig voor 28 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/24

135MA

Operation Manual

Some models may be exported under the name Amcron

Trademark Notice: Crown, Crown Audio, and Amcron are registered trademarks of Crown International. Other trademarks are the

property of their respective owners.

Obtaining Other Language Versions: To obtain information in another language about the use of this product, please contact your

local Crown Distributor. If you need assistance locating your local distributor, please contact Crown at 574-294-8000.

This manual does not include all of the details of design, production, or variations of the equipment. Nor does it cover every possible

situation which may arise during installation, operation or maintenance.

The information provided in this manual was deemed accurate as of the publication date. However, updates to this information may have

occurred. To obtain the latest version of this manual, please visit the Crown website at www.crownaudio.com.

140497-1

2/08

Commercial Audio Series

160MA

Commercial Audio Series Mixer-Ampliﬁ ers

Operation Manualpage 2

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with a dry cloth.

7. Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat

reg isters, stoves, or other apparatus (including ampliﬁ ers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or

grounding-type plug. A polarized plug has two blades with

one wider than the other. A grounding-type plug has two

blades and a third grounding prong. The wide blade or

the third prong is provided for your safety. If the provided

plug does not ﬁ t into your outlet, consult an electrician for

replacement of the obsolete outlet.

Important Safety Instructions

MAGNETIC FIELD

CAUTION! Do not locate sensitive high-gain equipment such as

preampliﬁ ers or tape decks directly above or below the unit. Because

this ampliﬁ er has a high power density, it has a strong magnetic ﬁ eld

which can induce hum into unshielded devices that are located nearby.

The ﬁ eld is strongest just above and below the unit.

If an equipment rack is used, we recommend locating the ampliﬁ er(s)

in the bottom of the rack and the preampliﬁ er or other sensitive equip-

ment at the top.

The lightning bolt triangle is used to alert the user to the risk of

electric shock.

The exclamation point triangle is used to alert the user to

important operating or maintenance instructions.

REGARDEZ CES SYMBOLES:

La triangle avec le sigle ‘’foudre’’ est employée pour alerter

l’utilisateur au risque de décharge électrique. Le triangle avec

un point d’exclamation est employée pour alerter l’utilisateur

d’instruction importantes pour lors opérations de mainte nance.

ATENCION CON ESTOS SÍMBOLOS:

El triángulo con el símbolo de rayo eléctrico es usado para

alertar al usuario de el riesgo de un choque eléctrico.

El triángulo con el signo de admiración es usado para alertar

al usuario de instrucciones importantes de operación o man-

tenimiento.

WATCH FOR THESE SYMBOLS:

IMPORTANT

Commercial Audio Series mixer-ampliﬁ ers require Class 2 output

wiring.

Les ampliﬁ cateurs de série de Commercial Audio exigent des câbles

de sortie de classe 2.

Commercial Audio-Reihe-Verstärker verlangen Klasse die 2

Produktionsverdrah tung.

TO PREVENT ELECTRIC SHOCK DO NOT REMOVE TOP OR

BOTTOM COVERS. NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

À PRÉVENIR LE CHOC ÉLECTRIQUE N’ENLEVEZ PAS LES

COUVERCLES. IL N’Y A PAS DES PARTIES SERVICEABLE

À L’INTÉRIEUR. TOUS REPARATIONS DOIT ETRE FAIRE PAR

PERSONNEL QUALIFIÉ SEULMENT.

PARA PREVENIR UN CHOQUE ELÉCTRICO, NO RETIRE LAS

CUBIERTAS SUPERIOR O INFERIOR. NO EXISTEN PARTES QUE

PUEDAN SER REPARADAS POR EL USUARIO AL INTE RIOR.

REMITA EL SERVICICO AL PERSONAL TÉCHNICAL CALIFI-

CADO.

TO COMPLETELY DISCONNECT THIS EQUIPMENT FROM THE

AC MAINS, DISCONNECT THE POWER SUPPLY CORD PLUG

FROM THE AC RECEPTACLE. THE MAINS PLUG OF THE POWER

SUPPLY CORD SHALL REMAIN READILY OPERABLE.

POUR DÉMONTER COMPLÈTEMENT L’ÉQUIPEMENT DE

L’ALIMENTATION GÉNÉRALE, DÉMONTER LE CÂBLE D’ALI-

MENTATION DE SON RÉCEPTACLE. LA PRISE D’ALIMEN TATION

RESTERA AISÉMENT FONCTIONNELLE.

PARA DESCONECTAR COMPLETAMENTE EL EQUIPO DEL

SUMINSTRO ELECTRICO, DESCONECTE EL CABLE DE ALI-

MENTACION DE LA TOMA DE CA. LAS PATAS DEL CONEC TOR

DEL CABLE DE ALIMENTACIÓN DEBERAN MANTENERSE EN

BUEN ESTADO.

FCC COMPLIANCE NOTICE

This device complies with part 15 of the FCC rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

CAUTION: Changes or modiﬁ cations not expressly approved by the party responsible for

complicance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equip-

ment generates, uses, and can radiate radio frequency energy and, if not installed and used

in accordance with the instruction manual, may cause harmful interference to radio com-

munications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television recep-

tion, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

10. Protect the power cord from being walked on or pinched,

par ticularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. Only use attachments/accessories speciﬁ ed by the manufac-

turer.

12. Use only with a cart, stand, tripod, bracket, or table speciﬁ ed

by the manufacturer, or sold with the apparatus. When a

cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when

unused for long periods of time.

14. Refer all servicing to qualiﬁ ed service personnel. Servicing

is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid

has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does

not operate nor mally, or has been dropped.

15. Use the mains plug to disconnect the apparatus from the

mains.

16. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC

SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR

MOISTURE.

17. DO NOT EXPOSE THIS EQUIPMENT TO DRIPPING OR

SPASHING AND ENSURE THAT NO OBJECTS FILLED

WITH LIQUIDS, SUCH AS VASES, ARE PLACED ON THE

EQUIPMENT.

18. THE MAINS PLUG OF THE POWER SUPPLY CORD SHALL

REMAIN READILY OPERABLE.

Importantes Instructions de Sécurité

Wichtige Sicherheitsinstruktionen

Instrucciones de Seguridad Importantes

Commercial Audio Series Mixer-Ampliﬁ ers

Operation Manual page 3

Equipment Type: Commercial Audio Mixer-Ampliﬁ ers

Family Name: Commercial Audio Family

Model Names: 135MA, 160MA

EMC Standards:

EN 55103-1:1995 Electromagnetic Compatibility - Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for Professional Use, Part 1: Emissions

EN 55103-1:1995 Magnetic Field Emissions-Annex A @ 10 cm and 1 M

EN 61000-3-2:1995+A14:2000 Limits for Harmonic Current Emissions (equipment input current 16A per phase)≤

EN 61000-3-3:1995 Limitation of Voltage Fluctuations and Flicker in Low-Voltage Supply Systems Rated Current 16A ≤

EN 55022:1992 + A1: 1995 & A2:1997 Limits and Methods of Measurement of Radio Disturbance Characteristics of ITE: Radiated, Class B Limits; Conducted, Class B

EN 55103-2:1996 Electromagnetic Compatibility - Product Family Standard for Audio, Video, Audio-Visual and Entertainment Lighting Control Apparatus for Professional Use, Part 2: Immunity

EN 61000-4-2:1995 Electrostatic Discharge Immunity (Environment E2-Criteria B, 4k V Contact, 8k V Air Discharge)

EN 61000-4-3:1996 Radiated, Radio-Frequency, Electromagnetic Immunity (Environment E2, Criteria A)

EN 61000-4-4:1995 Electrical Fast Transient/Burst Immunity (Criteria B)

EN 61000-4-5:1995 Surge Immunity (Criteria B)

EN 61000-4-6:1996 Immunity to Conducted Disturbances Induced by Radio-Frequency Fields (Criteria A)

EN 61000-4-11:1994 Voltage Dips, Short Interruptions and Voltage Variation

Safety Standard:

EN 60065: 1998 Safety Requirements - Audio Video and Similar Electronic Apparatus

I certify that the product identiﬁ ed above conforms to the requirements of the EMC Council Directive 89/336/EEC as amended by 92/31/EEC, and the Low Voltage Directive 73/23/EES as amended by 93/68/EEC.

DECLARATION OF CONFORMITY

Crown International, Inc.

Issued By: Crown International, Inc.

1718 W. Mishawaka Rd.

Elkhart, IN 46517 U.S.A.

Sue Whitﬁ eld

574-294-8289

swhitﬁ eld@crownintl.com

European Representative’s Name and Address:

David J. Budge

10 Harvest Close

Yateley