Cisco WAP351 Handleiding

Cisco Access point WAP351

Lees hieronder de 📖 handleiding in het Nederlandse voor Cisco WAP351 (12 pagina's) in de categorie Access point. Deze handleiding was nuttig voor 59 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/12

Quick Start Guide

Cisco WAP351 Wireless-N Dual Radio Access

Point with 5 Ports Switch

Package Contents

•Wireless Access Point

•Mounting Kit

•This Quick Start Guide

•Product CD

•Ethernet Cable

•Technical Support Contact

•China RoHS (for China SKU only)

2 Cisco WAP351 Quick Start Guide

Welcome

Thank you for choosing the Cisco WAP351 Wireless-N Dual Radio Access

Point with 5 Ports Switch. The Cisco WAP351 is an indoor concurrent

dual-band radio 802.11n access point with integrated PoE switch.

This guide provides the general layout of the Cisco WAP351, describe

how to deploy the Cisco WAP351 in your network, and describe how to

configure the Cisco WAP351. For additional information, see

www.cisco.com/go/300_wap_resources.

Before You Begin

Before you begin the installation, make sure that you have the following

equipment and services:

•A computer with browser support for:

– Internet Explorer 7.0 or later

– Chrome 5.0 or later

– Firefox 3.0 or later

– Safari 3.0 or later

•Tools for installing the hardware

•One or more Ethernet network switches with PoE

Cisco WAP351 Features

Front Panel

The front panel of the Cisco WAP351 consists of three lights: Power,

WLAN, and PSE. For full descriptions of the colors of the lights and their

indications, see “Verifying the Hardware Installation”.

Back Panel

POWER—The POWER button is used to turn the power on and off. It is not

applicable when using PoE.

48V DC—The 48V DC jack is used to connect the power adapter to the

Cisco WAP351 if you are not using PoE.

RESET—See “Rebooting the Cisco WAP351 or Resetting to Factory

Defaults” for information on the RESET button.

Cisco WAP351 Quick Start Guide 3

PD—The Powered Device (PD) port is used to power the Cisco WAP351

using PoE.

PSE—The Power Sourcing Equipment (PSE) port is used to power the

device that is connected to the Cisco WAP351 through this port.

LAN1-5—The RJ-45 Ethernet port is an auto-sensing, Gigabit Ethernet

(802.3) port used to connect theCisco WAP351to network devices, such

as computers, routers, or switches. We strongly recommend that you use

a Category 5e or better cable for gigabit connectivity.

Side Panel

The side panel of the Cisco WAP351 has a Kensington lock slot. You can

use it to attach a cable and lock to the Cisco WAP351.

Default Settings

If you are using a Cisco RV Series router, the default range for the DHCP

assigned address is from 192.168.1.100 to 192.168.1.254. Any device

connecting to the same LAN will be assigned an IP address in this range.

Mounting the Cisco WAP351

There are two ways to physically install the Cisco WAP351:

•Place the Cisco WAP351 horizontally on a flat surface so that it sits on

its four rubber feet.

•Mount the Cisco WAP351 to a wall or ceiling.

Placement Tips

• Ambient Temperature—To prevent the Cisco WAP351 from

overheating, do not operate it in an area that exceeds an ambient

temperature of 104°F (40°C).

• Air Flow—Both side panels have vents that must be unobstructed to

prevent overheating.

Parameter Default Value

Username cisco

Password cisco

LAN IP Address DHCP address assigned by server

Fallback LAN IP 192.168.1.245

Subnetwork Mask 255.255.255.0

Product specificaties

Merk:	Cisco
Categorie:	Access point
Model:	WAP351
Kleur van het product:	Wit
Gewicht:	607 g
Breedte:	230 mm
Diepte:	230 mm
Hoogte:	40 mm
LED-indicatoren:	Ja
Bedrijfsmodi:	Access Point (AP),WDS Bridge,Workgroup Bridge
Stroom:	1.25 A
Aan/uitschakelaar:	Ja
Plaatsing:	Ceiling,Table,Wall
Montage gereedschap:	Ja
Inclusief besturingssysteem:	Linux
Frequentieband:	2.412 - 2.472, 5.18 - 5.24 GHz
Meegeleverde kabels:	LAN (RJ-45)
Snelstartgids:	Ja
Aantal Ethernet LAN (RJ-45)-poorten:	5
Bevestigingsmogelijkheid voor kabelslot:	Ja
Kabelslot sleuf type:	Kensington
Certificering:	UL 60950-1\nCAN/CSA-C22.2 No. 60950-1\nIEC 60950-1\nEN 60950-1\nFCC\nICES-003\nEN 301.489-1
Intern geheugen:	128 MB
Ethernet LAN, data-overdrachtsnelheden:	10,100,1000 Mbit/s
Netwerkstandaard:	IEEE 802.11a,IEEE 802.11b,IEEE 802.11e,IEEE 802.11g,IEEE 802.11i,IEEE 802.11n,IEEE 802.1D,IEEE 802.1Q,IEEE 802.1x,IEEE 802.3,IEEE 802.3ab,IEEE 802.3af,IEEE 802.3at,IEEE 802.3u
Ondersteunde beveiligingsalgoritmen:	802.1x RADIUS,WPA,WPA2
Soort antenne:	Intern
Antenne versterkingsniveau (max):	5.3 dBi
Temperatuur bij opslag:	-20 - 70 °C
Intern:	Nee
Draadloos LAN data-overdrachtsnelheid (max):	300 Mbit/s
Web-gebaseerd management:	Ja
Luchtvochtigheid bij opslag:	5 - 90 procent
Reset button:	Ja
Flash memory:	128 MB
Maximale overdrachtssnelheid van gegevens:	1000 Mbit/s
2,4 GHz:	Ja
5 GHz:	Ja
Quality of Service (QoS):	Ja
VLAN=ondersteuning:	Ja
Wifi Multimedia (WMM)/(WME):	Ja
Auto Wireless Distribution System (WDS):	Ja
DHCP client:	Ja
Power over Ethernet (PoE):	Ja
Aantal kanalen:	17 kanalen
Beheerprotocollen:	HTTP/HTTPS, SNMP v3, Bonjour
Draadloze isolatie:	Ja
Automatische kanaalselectie:	Ja
AC-ingangsspanning:	48 V
Bedrijfstemperatuur (T-T):	0 - 40 °C
Relatieve vochtigheid in bedrijf (V-V):	10 - 85 procent
Cd-handleiding:	Ja
Syslog:	Ja