Chef's Choice Ceramic+Steel Diamond Hone 702 Handleiding

Chef's Choice Messenslijper Ceramic+Steel Diamond Hone 702

Lees hieronder de 📖 handleiding in het Nederlandse voor Chef's Choice Ceramic+Steel Diamond Hone 702 (16 pagina's) in de categorie Messenslijper. Deze handleiding was nuttig voor 75 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/16
MODEL 702 INSTRUCTIONS
Ceramic + Steel Diamond Hone®
Knife Sharpener
Read these instructions before use.
It is essential that you follow these
instructions to achieve optimum results.
© 2017 EdgeCraft Corp.
GB
2
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should always be
followed including the following:
1. Read all instructions. Every user should read this manual.
2. To protect against electrical hazards, do not immerse the Chef’sChoice
® Ceramic + Steel
Model 702 sharpener in water or other liquid.
3. Make sure that only clean knife blades are inserted in Chef’sChoice
® Ceramic + Steel
Model 702.
4. Disconnect the appliance from its power source when not in use, before cleaning, during
service and when replacing parts.
5. Avoid contacting moving parts.
6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions,
or is dropped or damaged in any manner.
U.S. customers: You can return your sharpener to EdgeCraft’s factory for service where the cost
of repair or electrical or mechanical adjustment can be estimated. When the electrical cord on
this appliance is damaged, it must be replaced by the Chef’sChoice® distributor or other
qualified service to avoid the danger of electrical shock.
Outside U.S.: Please return your sharpener to your local distributor where the cost of repair or
electrical or mechanical adjustment can be estimated. If the supply cord of this appliance
is damaged, it must be replaced by a repair facility appointed by the manufacturer because
special tools are required. Please consult your Chef’sChoice
® distributor.
7. CAUTION! This appliance may be fitted with a polarized power plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Do not modify the plug in anyway.
8. The use of attachments not recommended or sold by EdgeCraft Corporation may cause fire,
electric shock or injury.
9. The Chef’sChoice® Ceramic + Steel Model 702 is designed to sharpen both Ceramic and Steel
knives. Do not attempt to sharpen scissors, ax blades or any blade that does not fit freely
in the slots.
10. Do not let the cord hang over edge of table or counter or touch hot surfaces.
11. When in the “ON” position (Red flash on switch is exposed when “ON”), the ChefsChoice
®
sharpener should always be on a stable countertop or table.
12. WARNING: KNIVES PROPERLY SHARPENED ON YOUR ChefsChoice
® Ceramic + Steel Model
702 WILL BE SHARPER THAN YOU EXPECT. TO AVOID INJURY, USE AND HANDLE THEM WITH
EXTREME CARE. DO NOT CUT TOWARD ANY PART OF YOUR FINGERS, HAND OR BODY. DO NOT
RUN FINGER ALONG EDGE. STORE IN A SAFE MANNER.
13. Do not use outdoors.
14. Appliance is not intended to be used or cleaned by children or persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge of the hazards involved.
15. Do not use honing oils, water or any other lubricant with the ChefsChoice
® Ceramic + Steel
Model 702.
16. For household use only.
17.
SAVE THESE INSTRUCTIONS.
3
YOU MADE
AN EXCELLENT
CHOICE
Congratulations! As an owner of the highly versatile ChefsChoice
®
Ceramic + Steel Model 702 you will appreciate how easy it is to
maintain all of your Ceramic and Steel knives in factory sharp
condition. A precise guide system is provided to position each
style knife automatically at the optimum sharpening angle as
customized diamond abrasive disks quickly restore a fresh edge. The
edge is then polished and nished with the Chef’sChoice
® revolutionary
polishing disks to astonishingly sharpness. You will appreciate the
joy of effortless cutting and the unmatched presentation of each
flawless slice.
The Chef’sChoice® Ceramic + Steel Model 702 is designed to sharpen
both, your Ceramic and Steel knives to match or exceed the factory
sharpness and edge quality of the highest quality knives.
Uniquely the Chef’sChoice
® Ceramic + Steel Model 702 is designed
to create a precise primary angle on the blade followed by a second
small microbevel along that edge facet that adds significant strength,
sharpness and durability to that already very sharp edge.
Thus you will realize the extra advantages in sharpness and durability
that have made Chef’sChoice
® sharpeners the choice of professionals,
worldwide.
We strongly encourage you to read the following sections that
detail optimum sharpening procedures for each type of blade.
Enjoy!


Product specificaties

Merk: Chef's Choice
Categorie: Messenslijper
Model: Ceramic+Steel Diamond Hone 702

Heb je hulp nodig?

Als je hulp nodig hebt met Chef's Choice Ceramic+Steel Diamond Hone 702 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Messenslijper Chef's Choice

Handleiding Messenslijper

Nieuwste handleidingen voor Messenslijper