Celestron PowerTank 18763 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Celestron PowerTank 18763 (40 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 48 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/40
INSTRUCTION MANUAL
ENG LI SH
P O R T A B L E P O W E R P A C K
#18763
2 IENGLISH
PowerTank Lithium LT is a highly portable power pack that
uses a lithium nickel cobalt manganese battery and voltage
regulating electronics. It is engineered specifically for use with
telescopes, as the consistent 12V DC output ensures optimal
telescope performance as the battery is discharged. It also
works great with telescope accessories and other electronics
1. 12V DC input/output port
2. Battery indicator lights
3. USB output port
4. Power Button
5. Tripod leg mount
6. Tripod leg strap
7. Celestron telescope power cable
8. AC charger
9. International adapter plug (x4)
1 2 3 4
5
6
7
8
9
FEATURES AN D PARTS LIST
requiring 12V DC power. In addition, PowerTank Lithium LT
has a fast-charging USB port for charging devices such as
smartphones and tablets.
Please read through this instruction manual to understand the
functions and features of the PowerTank Lithium LT.
ENGLISH I3
OPERATION
CHARGING THE POWERTANK LITHIUM LT
We recommend fully charging the power pack when
you first receive it and before first use. To maintain its
performance, you should recharge the unit at least once
every 6 months.
TO CHARGE:
1. Determine which international adapter plug you need
for your location and slide it into place on the AC
charger. Make sure the adapter plug is fully seated and
snaps into place.
2. Plug the AC charger’s cable into the 12V DC port on
the power pack.
3. Plug the AC charger into an electrical outlet. The
charger can accept an AC input of 100-240V
50/60Hz.
The battery indicator lights will blink when charging. When
charging is complete, all the lights will remain illuminated. Fully
charging the power pack can take up to 4 hours. Dont leave
the AC charger connected to the power pack for more
than 24 hours.
If you are traveling internationally with the PowerTank Lithium
LT, it may be necessary to change the AC charger’s adapter
plug. To do this, simply depress the locking button on the
charger (located directly below the plug), slide the plug off and
replace it with the plug you need.
WARNING: The AC charger has an output of 16V DC. Do not attempt to use this charger
to power your telescope directly or damage to the telescope could result.
THE POWER BUTTON AND BATTERY INDICATOR LIGHTS
Pressing the power button turns the PowerTank Lithium LT on,
and allows use of the USB and 12V DC output ports. Both
ports can be used at the same time. The battery indicator lights
will also turn on and indicate the battery charge status:
4 lights illuminated 100 % charged
3 lights illuminated 75% charged
2 lights illuminated 50% charged
1 light illuminated 25% charged
The battery indicator lights will turn off after about 10 seconds.
They will turn on again when a device is connected to one of
the charging ports. When the battery is fully discharged, the
power pack will automatically shut off, and cannot be turned on
again until it is recharged.
Press and hold the power button for one second to turn the
PowerTank Lithium LT off. The power will automatically turn off
if there is no load detected (less than 150mA) for one hour.


Product specificaties

Merk: Celestron
Categorie: Niet gecategoriseerd
Model: PowerTank 18763

Heb je hulp nodig?

Als je hulp nodig hebt met Celestron PowerTank 18763 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Celestron

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd