CAME-TV NANO Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor CAME-TV NANO (24 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 7 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/24
NANO
USER MANUAL
V2.4.2
The CAME-NANO is a compact portable intercom
device that adopts full duplex technology, allowing
multiple parties to have simultaneous conversations.
It features a built-in speaker on the fuselage,
which can produce sound externally, and it can also
be connected to other audio devices using a 3.5mm
audio jack. It offers versatile carrying options,
such as hanging, clipping, or holding it by hand.
Suggestions for optimal use
1 When you receive NANO, please charge it before turning it on.
Make sure the devices are in off state while charging to prevent battery
draining when fully charged.
When devices are in close proximity, they may generate noise. To mitigate
this, press the middle button to turn off the microphone.
2 The intercom system consists of a master and multiple remotes. The master
acts as a signal transfer station for the remotes. So in actual use, the remotes
should be distributed around the master to achieve the optimal use effect.
3 The best communication quality is achieved when there are no obstacles
between the master and remotes. Obstructions like the human body can impact
the effectiveness of the device.So we advise using arm belt.
4 The signal antenna of the CAME-NANO is generally located around the
lanyard hole area. It is important to not cover this region to ensure quality
communication.
6 The 3.5mm interface follows the (US) CTIA standard. If you have OMTP
standard equipment, an audio cable will be required.
CAME-NANO Portable Intercom System
1
1
2
3
4
5
6
7
CAME-NANO Parameters
Parameters
Standard DECT technology, GAP compatible
Working Distance 1100 ft. radius at Master in the open air
Working Time Master 7 Hours // Remote 13 Hours
Channel Bandwidth 1.728MHz
Modulation Type GFSK
Duplex Operation Time Division Duplex (TDD)
CE Frequency 1881.792-1897.344 MHz
FCC Frequency 1920-1930 MHz
Type-C Charging 5V, 500mA
Battery Capacity 3.7V ,1100 mAh
Audio Interface 3.5mm TRRS
2


Product specificaties

Merk: CAME-TV
Categorie: Niet gecategoriseerd
Model: NANO

Heb je hulp nodig?

Als je hulp nodig hebt met CAME-TV NANO stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd CAME-TV

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Festo

Festo VPPI Handleiding

21 November 2024
Festo

Festo SFAB Handleiding

21 November 2024
Festo

Festo SFAH Handleiding

21 November 2024
Festo

Festo DRRD-12 Handleiding

21 November 2024
Festo

Festo SDE3 Handleiding

21 November 2024
Festo

Festo SFTE Handleiding

21 November 2024
Festo

Festo CRVZS-5 Handleiding

21 November 2024