Blustream UEX50B-KIT Handleiding

Blustream Niet gecategoriseerd UEX50B-KIT

Lees hieronder de 📖 handleiding in het Nederlandse voor Blustream UEX50B-KIT (6 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 44 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

UEX50B-KIT QUICK REFERENCE GUIDE

Contact: support@blustream.com.au | | support@blustream-us.com support@blustream.co.uk

UEX50B-KIT

Quick Reference Guide

Our UEX50B-KIT delivers USB 2.0 extension up to 50m over a single CAT cable

while allowing up to 4 USB devices to be connected to a single USB host. Supports

transmittion data bandwidth up to 480Mbps, backwards compatible with USB 1.1

devices.

Introduction

FEATURES:

• Extends USB up to a distance of 50m over a single CAT cable

• Supports USB 2.0 signal extension

• Backwards compatible with USB 1.1 devices

• Transmitted data bandwidth up to 480Mbps

• 1x USB-B on Receiver for connection to host device

• 4x USB-A hub on Transmitter for conncetion to devices

• USB-A ports 1-2 support 5V1A, USB-A ports 3-4 support 5V500mA

• Simple plug and play, no driver installation or setup required.

*Signal distribution length subject to length of device and host USB cables and CAT cable type

UEX50B-KIT QUICK REFERENCE GUIDE

www.blustream.com.au | www.blustream-us.com www.blustream.co.uk|02

TX Panel Descriptions

1 CAT Cable Connect to CAT cable and to UEX50B-RX Connection -

2 12V/2A DC Power Input screw type connector

3 Power Status Indicator

4 1A USB Device Connection - USB A connection to connect to high current (up to 1A) USB devices

5 500mA USB Device Connection - USB A connection to connect to low current (up to ) USB devices500mA

6 CAT Cable Connect to CAT cable and to UEX50B-TX Connection -

7 Power Switch - Select between powering the Receiver from the Transmitter (TX) or Host PC that USB is connected to

8 USB Host Connection - USB B connection to connect to PC

9 Power Status Indicator

7 8

RX Panel Descriptions

Device Cabling

It is important that interconnecting CAT cable between the Transmitter and Receiver is terminated using straight the

correct RJ45 pin configuration. The CAT cable MUST be a ‘straight’ (pin-to-pin) CAT cable.

Please ensure that the USB cabling used with this product is within specifications for both the distance and maximum

/ expected data rate transfer of the equipment in use. Exceeding distances, or using cabling not suitable for the data

transfer, may stop the UEX50B-KIT from working properly.

It is recommended to keep the USB cabling either side of the UEX50B-KIT to a minimum, using the range of the

equipment to run the distance over the CAT cable infrastructure.

UEX50B-KIT QUICK REFERENCE GUIDE

Contact: support@blustream.com.au | | support@blustream-us.com support@blustream.co.uk 03

Schematic

Product specificaties

Merk:	Blustream
Categorie:	Niet gecategoriseerd
Model:	UEX50B-KIT
Gewicht:	500 g
Soort:	Zender en ontvanger
Gebruikershandleiding:	Ja
Stroom:	2 A
Connectiviteitstechnologie:	Bedraad
Meegeleverde kabels:	AC, USB Type-A to USB Type-B
Inclusief AC-adapter:	Ja
Plug and play:	Ja
Temperatuur bij opslag:	-25 - 70 °C
Rack-montage:	Ja
Afmetingen (B x D x H):	84 x 60 x 23.5 mm
Maximaal bereik:	50 m
AC-ingangsspanning:	12 V
Bedrijfstemperatuur (T-T):	-5 - 55 °C
Inclusief bevestigingsbeugel:	Ja
USB data-overdrachtssnelheden:	480 Mbit/s
USB-poorttype:	USB Type-A/USB Type-B
Aantal RJ-45-poorten (ontvanger):	1
Aantal RJ-45-poorten (zender):	1