Blustream DA22XLR-WP-US Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Blustream DA22XLR-WP-US (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 19 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
DA22XLR-WP-US QUICK REFERENCE GUIDE
03
Contact: support@blustream.com.au support@blustream-us.com | | support@blustream.co.uk
Dante® Controller so฀ware is required in order to set
up and configure the DA22XLR-WP-US as well as control
the Dante network. Audinate provide extensive training ®
videos and documentation on their website. This can
be found here: http://www.audinate.com/products/
so฀ware/dante-controller
Upon connecting the DA22XLR-WP-US to a compatible
network, the Dante Controller so฀ware will ®
automatically discover the device. The DA22XLR-WP-US
will appear in the Dante Controller with a name prefixed ®
as “DA22XLR-WP-US”. On the Routing” screen audio can
be routed between Dante transmitters and receivers in ®
the system.
Please ensure that the PC is on the same network as
the Dante devices. Dante is not able to transmit over ® ®
WiFi, and it is recommended to hardwire into the Dante®
network. Having multiple network devices enabled
can also confuse the Dante Controller so฀ware so it is ®
recommended to disable WiFi during configuration.
Dante® Controller
RevA4_QRG_DA22
Advanced Dante Settings®
It is also possible to change the settings of the DA22XLR-
WP-US within the “Device Info” screen in the Dant
Controller so฀ware. To do so, select theDevice Config
menu.
The sample rate of the DA22XLR-WP-US can be adjusted
here. Please note: Dante products can only transmit or ®
receive audio from other Dante products that are set up ®with the same sample rate. A mismatch in sample rate may stop audio from transmitting.Under the “Device Configscreen, the latency can be adjusted of the DA22XLR-WP-US from 1, 2 or 5 milliseconds.By default the DA22XLR-WP-US is shipped with its network settings set to obtain an IP address automatically. This means that if a DHCP ser ver is present on the network, it will provide the DA22XLR-WP-US with an IP address. If no DHCP server is present then the DA22XLR-WP-US will receive a default IP address in the 169.254.xxx.xxx range. To change the IP address of the DA22XLR-WP, enter the Network Config” menu in the “Device Info screen of the Dante® Controller so฀ware.
DA22XLR-WP-US QUICK REFERENCE GUIDE
04 www.blustream.com.au | www.blustream-us.com www.blustream.co.uk|
Specifications
Audio Input Connectors: 2 x Analog balanced/unbalanced 3-Pin XLR connector
Audio Output Connectors: 2 x Analog balanced/unbalanced 3-Pin XLR connector
Network Connectors: 1 x PoE Dante Ethernet Connection (RJ45)®
Configuration Switches: 4 x 5 position rotary dials (Sensitivity / Gain),
2 x Push button (48V Phantom power)
Firmware Upgrade: 1 x Micro-USB UART port
Module Dimensions (L x W x H): 105mm x 95mm x 45mm (without faceplate)
Faceplate Dimensions (L x W x H): 115mm x 115mm x 5mm
Cut Out Dimensions (L x W x H): 89mm x 71mm x 41mm
Mounting Hole Spacing: US 83.5mm CTC
Backbox Requirements: US double gang junction box
Shipping Weight: 0.6kg
Operating Temperature: 32°F to 104°F (0°C to 40°C)
Storage Temperature: - 4°F to 140°F (- 20°C to 60°C)
Power Supply: Class 0 IEEE 802.3af POE PD or 12V/1A DC, 2-Pin Phoenix connector
Package Contents
1 x DA22XLR-WP-US
1 x Magnetic Faceplate
1 x Quick Reference Guide
Acknowledgements
Dante® is a registered trademark of
Audinate Pty Ltd.
DA22XLR-WP-US
Example Schematic

Dante®
Controller
1G Net work Switch
CAT Cabl e
XLR Audio
AMP
MIC
AUDIO
SOURCE
XLR AUDIO
INPUTS
XLR AUDIO
OUTPUTS
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CAUTION - changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
CANADA, INDUSTRY CANADA (IC) NOTICES
This Class B digital apparatus complies with Canadian ICES-003.Operation is
subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may
cause undesired operation of the device.
CORRECT DISPOSAL OF THIS PRODUCT
This marking indicates that this product should not be disposed with other
household wastes. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable
reuse of material resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was purchased. They
can take this product for environmentally safe recycling.
Certifications


Product specificaties

Merk: Blustream
Categorie: Niet gecategoriseerd
Model: DA22XLR-WP-US

Heb je hulp nodig?

Als je hulp nodig hebt met Blustream DA22XLR-WP-US stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Blustream

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd