Blustream UEX100E-KIT Handleiding

Blustream Niet gecategoriseerd UEX100E-KIT

Lees hieronder de 📖 handleiding in het Nederlandse voor Blustream UEX100E-KIT (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/3

UEX100E-KIT QUICK REFERENCE GUIDE

Contact: support@blustream.com.au | support@blustream-us.com support@blustream.co.uk|

UEX100E-KIT

Quick Reference Guide

The UEX100E-KIT is a USB extender kit utilising HDBaseT™ technology to extend

USB 2.0, 2CH analogue audio and control signals up to 100m over a single CAT

cable. The UEX100E-KIT allows up to 4 USB devices to be connected to a single

USB host with support for a transmittion data bandwidth up to 480Mbps and is

backwards compatible with USB 1.1 devices. The UEX100E-KIT also provides bi-

directional Power over Cable (PoC), bi-directional IR and RS-232 and 2CH analogue

and Ethernet pass through.

Introduction

FEATURES:

• Extends USB up to a distance of 100m over a single CAT cable using HDBaseT™ Technology

• Supports USB 2.0 signal extension

• Backwards compatible with USB 1.1 devices

• Transmitted data bandwidth up to 480Mbps

• 1x USB-B on Transmitter for connection to host device

• 4x USB-A hub on Receiver for connection to devices

• USB-A ports 1-2 support 5V1A, USB-A ports 3-4 support 5V500mA

• Bi-directional Ethernet pass through (100Mbps)

• Bi-directional IR & RS-232 pass through

• Supports 2CH PCM Analogue Audio pass through (direction selectable)

• Bi-directional PoC (Power over Cable) to power extenders from either transmitter or receiverend

• Simple plug and play, no driver installation or setup required.

*Signal distribution length subject to length of device and host USB cables and CAT cable type

CONFIGUSB HOST RS-232

TX RX

24V 1.25AETHERNET HDBT IN IR IN IR OUT L/R

AUDIO

IN OUT

500mA CONFIG RS-2321A

1234

TX RX

24V 1.25AETHERNET HDBT OUT IR IN IR OUT L/R

AUDIO

IN OUT

UEX100E-KIT QUICK REFERENCE GUIDE

www.blustream.com.au | www.blustream-us.com | www.blustream.co.uk02

TX Panel Descriptions

1 Ethernet Port - RJ45 connector. Connect to local

network switch

2 HDBaseT™ Output - RJ45 connector

3 IR Input - Connect to Blustream 5V 3.5mm IR receiver

4 IR Output - Connect to Blustream 5V 3.5mm IR emitter

5 Analogue Audio L/R - 3.5mm stereo jack can be used

as input or output from UEX100E-RX

6 Analogue Audio In/Out Switch - Select if audio is sent

to or received from UEX100E-RX

7 24V DC 1.25A 4-pin power supply connector

8 LED Power Indicator

9 1A USB Device Connection - USB A connection to

connect to high current (up to 1A) USB devices*

q 500mA USB Device Connection - USB A connection to

connect to USB devices up to 500mA*

w Config DIP Switch - DIP 1 sets PoC on or o. DIP 2 sets

RS232 passthrough or update mode

e RS-232 Port - 3-Pin Phoenix connector to pass bi-

directional IR to / from the receiver

*Note: only one USB camera can be connected at a time

1 Ethernet Port - RJ45 connector. Connect to local

ethernet port of network device

2 HDBaseT™ Input - RJ45 connector

3 IR Input - Connect to Blustream 5V 3.5mm IR receiver

4 IR Output - Connect to Blustream 5V 3.5mm IR emitter

5 Analogue Audio L/R - 3.5mm stereo jack can be used

as input or output from UEX100E-RX

6 Analogue Audio In/Out Switch - Select if audio is sent

to or received from UEX100E-TX

7 24V DC 1.25A 4-pin power supply connector

8 LED Power Indicator

9 USB Host Connection - USB B connection to connect

to PC

q Config DIP Switch - DIP 1 sets PoC on or o. DIP 2 sets

RS232 passthrough or update mode

w RS-232 Port - 3-Pin Phoenix connector to pass bi-

directional IR to / from the receiver

RX Panel Descriptions

21 53

Device Cabling

It is important that the interconnecting CAT cable between the Transmitter and Receiver is terminated using the

correct RJ45 pin configuration. The CAT cable MUST be a ‘straight’ (pin-to-pin) CAT cable.

Please ensure that the USB cabling used with this product is within specifications for both the distance and maximum

/ expected data rate transfer of the equipment in use. Exceeding distances, or using cabling not suitable for the data

transfer, may stop the UEX100E-KIT from working properly.

It is recommended to keep the USB cabling either side of the UEX100E-KIT to a minimum, using the range of the

equipment to run the distance over the CAT cable infrastructure.

24V 1.25AETHERNET HDBT OUT IR IN IR OUT L/R

AUDIO

IN OUT

24V 1.25AETHERNET HDBT IN IR IN IR OUT L/R

AUDIO

IN OUT

500mA CONFIG RS-2321A

1234

TX RX

6 7 9 10 11 12

CONFIGUSB HOST RS-232

TX RX

421 53 6 7 9 10 11

UEX100E-KIT QUICK REFERENCE GUIDE

www.blustream.com.au | www.blustream-us.com www.blustream.co.uk|

Specifications

NOTE: Specifications are subject to change without notice. Weights and

dimensions are approximate.

UEX100E-TX

• CAT Connectors: 1 x RJ45 connector

• USB Port: 4 x USB Type-A

• Audio Input/Output Port: 1 x Analogue Audio L/R

(3.5mm stereo jack)

• Ethernet Port: 1 x RJ45 Connector

• RS-232 Port: 1 x 3-pin Phoenix connector

• IR Input Port: 1 x 3.5mm stereo jack

• IR Output Port: 1 x 3.5mm mono jack

• Control Switch: 2-pin DIP switch

• Casing Dimensions (W x D x H): 150 x 100 x 25mm

• Power Supply: 24V/1.25A DC, 4-pin connector

UEX100E-KIT

• Box Dimensions (W x D x H): 190 x 160 x 130mm

• Shipping Weight: 1.6kg

• Operating Temperature: 32°F to 104°F (-5°C to +55°C)

• Storage Temperature: -4°F to 140°F (-25°C to +70°C)

FCC NOTICE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION - changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the

equipment.

CANADA, INDUSTRY CANADA (IC) NOTICES

This Class B digital apparatus complies with Canadian ICES-003. Operation is subject to the following two conditions: (1) this device may not cause

interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

CORRECT DISPOSAL OF THIS PRODUCT

This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human

health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device,

please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally

safe recycling.

Certifications

UEX100E-RX

• CAT Connectors: 1 x RJ45 connector

• USB Port: 1 x USB Type-B

• Audio Input/Output Port: 1 x Analogue Audio L/R

(3.5mm stereo jack)

• Ethernet Port: 1 x RJ45 Connector

• RS-232 Port: 1 x 3-pin Phoenix connector

• IR Input Port: 1 x 3.5mm stereo jack

• IR Output Port: 1 x 3.5mm mono jack

• Control Switch: 2-pin DIP switch

• Casing Dimensions (W x D x H): 150 x 100 x 25mm

• Power Supply: 24V/1.25A DC, 4-pin connector

Package Contents

• 1 x UEX100E-TX Transmitter

• 1 x UEX100E-RX Receiver

• 1 x 24V/1.25A DC Power Supply

• 1 x USB A to B cable (1m)

• 2 x Mounting Bracket Sets

• 1 x Quick Reference Guide

Product specificaties

Merk:	Blustream
Categorie:	Niet gecategoriseerd
Model:	UEX100E-KIT
Gewicht:	1600 g
Soort:	Zender en ontvanger
Gebruikershandleiding:	Ja
Stroom:	1.25 A
Connectiviteitstechnologie:	Bedraad
Meegeleverde kabels:	AC, USB Type-A to USB Type-B
Inclusief AC-adapter:	Ja
PC audio ingang:	Ja
PC Audio-uitgang:	Ja
RS-232 port:	1
Plug and play:	Ja
Temperatuur bij opslag:	-25 - 70 °C
Rack-montage:	Ja
RJ-45 ports hoeveelheid:	1
Afmetingen (B x D x H):	150 x 100 x 25 mm
Maximaal bereik:	100 m
AC-ingangsspanning:	24 V
Bedrijfstemperatuur (T-T):	-5 - 55 °C
Inclusief bevestigingsbeugel:	Ja
USB data-overdrachtssnelheden:	480 Mbit/s
Poorttype zender lokaal toetsenbord/muis:	USB
USB-poorttype:	USB Type-A/USB Type-B
Aantal RJ-45-poorten (ontvanger):	1
Aantal RJ-45-poorten (zender):	1