Bionaire BFH912 Handleiding
Bionaire
Verwarming
BFH912
Lees hieronder de 📖 handleiding in het Nederlandse voor Bionaire BFH912 (37 pagina's) in de categorie Verwarming. Deze handleiding was nuttig voor 62 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/37
MODEL: BFH912
pure indoor living
FAN HEATER
WITH ADVANCED
DIGITAL CONTROLS
INSTRUCTION MANUAL
NOTICE D’UTILISATION
BETRIEBSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUAL DE INSTRUÇÕES
MANUALE D’USO
INSTRUCTIEHANDLEIDING
BRUKERHÅNDBOK
KÄYTTÖOPAS
BRUKSANVISNING
BRUGERVEJLEDNING
INSTRUKCJA
ECVEIIDIO ODGCIXM VQGRGR
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
HASZNÁLATI UTASÍTÁS
NÁVOD K OBSLUZE
Holmes Products (Europe) Ltd.
1 Francis Grove
London SW19 4DT
England
Fax: +44 (0)20 8947 8272
Email: enquiriesEurope@jardencs.com
Website address: www.bionaire.com
UK - Free phone Customer Service Helpline – 0800 052 3615
Holmes Products France
1015, Rue du Maréchal Juin
Z.I Vaux - Le - Pénil
77000 Melun – France
Phone: +33 1 64 10 45 80
Fax: +33 1 64 10 02 32
FRANCE - SERVICE CONSOMMATEURS
© 2009 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved.
Distributed by Holmes Products (Europe) Ltd., 1 Francis Grove, London SW19 4DT, United Kingdom.
Printed in PRC
© 2009 Sunbeam Products, Inc. faisant affaires sous le nom de Jarden Consumer Solutions. Tous droits
réservés. Distribué par Holmes Products (Europe) Ltd., 1 Francis Grove, London SW19 4DT, United
Kingdom.
Imprimé en RPC 133368/9100020010338
BFH912I09MLM1
0 825 85 85 82
Belgium: +32 38 70 86 86
Czech Republic: +420 48 513 03 03
Finland: +358 98 70 870
Germany: +49 89 5480 195-0
Hungary: +36 1 37 17 970
Latvia: +371 7514081
Lithuania: +370 (52) 772388
Netherlands: +31 793 41 77 71
Poland: +48 22 847 8968
Russia: +7 095 334 82 21
Slovakia: +421 41 723 47 09
Spain: +34 902 051 045
English 2
Français/French 6
Deutsch/German 10
Español/Spanish 15
Nederlands/Dutch 19
Svenkas/Swedish 23
Suomi/Finnish 27
Dansk/Danish 31
Norsk/Norwegian 35
Polski/Polish 39
EKKHNIKA/Greek 44
PYCCKNÑ/Russian 49
Italiano/Italian 54
Magyar/Hungarian 59
"esky/Czech 53
Português/Portugese 67
BFH912-I_09MLM1.indd 1-3BFH912-I_09MLM1.indd 1-3 5/11/09 9:07:46 AM5/11/09 9:07:46 AM
RETAIN THE FOLLOWING FOR FUTURE
REFERENCE.
DESCRIPTIONS (See Fig.1 & 2)
A. Main Housing
B. Control Panel
C. Front Grill
D. Carry Handle
E. Power Light
F LCD Display
G Control buttons set
H Dial Wheel
PLEASE READ AND SAVE THESE
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic safety
precautions should always be taken including the
following:
1. Before connecting the heater, check that
the voltage indicated on the rating plate
corresponds to the main voltage in your
home/offi ce.
2. WARNING: In order to avoid overheating,
do not cover the heater ( ).
3. DO NOT position the heater directly under a
power socket.
4. Do not use this heater in the immediate
surroundings of a bath, a shower or a
swimming pool.
5. If the supply cord or plug is damaged, it must
be replaced by the manufacturer or its service
agent or similarly qualifi ed person in order to
avoid hazard. The heater contains no user
serviceable parts. Should the product suffer
damage or breakdown, it must be returned to
the manufacturer or their service agent.
6. Under the environment with electrical fast
transient, the product may malfunction and
require user to reset the product.
7. Do not use this heater with a programmer,
timer or any other device that switches the
heater on automatically, since a fi re risk
exists if the heater is covered or positioned
incorrectly.
8. Only touch the heater with dry hands.
9. DO NOT use this heater outdoors.
10. DO NOT position where it can be touched by
children, especially the very young.
11. Allow a safe area around the heater away
from furniture or other objects; at least 50
cm from the top and sides and 200 cm at the
front.
12. Do not use this heater when it is lying on its
side.
13. DO NOT use the heater in rooms with
explosive gas (e.g. petrol) or while using
infl ammable glue or solvent (e.g. when gluing
or varnishing parquet fl oors, PVC etc).
14. DO NOT insert any objects into the heater.
15. Keep the mains cord at a safe distance from
the main body of the heater.
16. If overheating should occur, the built-in
overheating safety device will switch off the
heater.
17. Do not place the cord under a rug.
18. The heater cannot be used adjacent to
curtains or combustible material. Curtains or
combustible material may be burned if the
heater was installed incorrectly.
19. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
20. WARNING: Risk of Fire. Discontinue
use if the outlet or plug become hot to the
touch. Overheating may indicate a worn
or damaged outlet. Consult a qualifi ed
electrician for outlet replacement.
21. CAUTION: In order to avoid a hazard due
to inadvertent resetting of the thermal cutout,
this appliance must not be supplied through
an external switching device, such as a timer,
or connected to a circuit that is regularly
switched on and off by the utility.
OPERATING INSTRUCTIONS
1. Place heater on a fi rm level surface.
2. Plug heater into wall socket. Once plugged in
the Power Light (E) will illuminate.
3. Operate heater by selecting modes and
settings (G+H) according to your preference.
Power ON/OFF
Press the Power ON/OFF button to turn the heater
on. Once heater on, the heater will run in 2 (HIGH)
heat mode and the icon will appear on the
LCD display. Press the Power ON/OFF button to
manually turn off the heater at any setting.
MODE SELECTION
Select you desired heat settings by pressing the
corresponding buttons (G) as located on your
heater. An indicator light will illuminate next to
each button (G) to indicate that the selected
setting/mode is activated.
Fan Only Setting
Press the Fan Only button to run the heater
without any heat output. The icon will appear
on the LCD Display.
1 - Low Heat
1 = LOW Heat setting. Press the (1) button to run
the heater continuously at 1100W. The icon
will appear on the LCD display.
2 - High Heat
2 = HIGH Heat setting. Press the (2) button to
run the heater continuously at 2200W. The
icon will appear on the LCD display.
Thermostat Control
Your heater is equipped with a digital thermostat
that allow you to set your heater to a precise
comfort control level by turning the Dial Wheel (H).
NOTE: Your heater comes with a thermostat
button ( ) on the control panel, you may either
press the button or turn the the Dial Wheel to
activate. The Thermostat icon ( ) will appear on
the LCD display.
To preset a precise comfort level, turn the Dial
Wheel to adjust the temperature from 30 ˚C to
18 ˚C (Default 30 ˚C) The LCD Display will show
the selected temperature reading. When the
preset temperature is reached the heater will
shut off and cool down for 15 seconds. When
the room temperature drops below the preset
temperature, the heater will automatically turn on
again to maintain the preset temperature level.
Frost Guard Setting
Your heater is equipped with a Frost Guard
feature. The heater will automatically turn on
when the room temperature drops to below 5 ˚C.
To activate the Frost Guard feature, turn the Dial
Wheel to show 5 ˚C and the Frost Guard icon
( ) will appear on the LCD Display.
NOTE: It is normal for the heater to cycle ON
and OFF to maintain the preset temperature.
Raise the thermostat setting to prevent the heater
from cycling. When the preset temperature
is reached or when the heater is shut off, the
fan will run for 15 seconds without heat. This
cool down process ensures an accurate and
consistent temperature reading.
NOTE: To shut the heater off at any time press
the Power Button ( ) until the LCD display goes
off. The heater will cool down for 15 seconds,
and the Fan Only indicator light will blink in
Amber until cool down is completed. The digital
thermostat has memory, it will remember the last
temperature setting before the heater is turned
off. However, if the heater is unplugged, the
digital thermostat will not longer remember the
previous temperature setting.
Timer
Your model is equipped with a 24 Hour Auto
shut-off timer feature. This allows you to
programme your heater to shut off automatically
after running a defi ned time interval (from 0-24
hours).
1. Press the Timer Button ( ) once. The
indicator light will begin to fl ash for 5
seconds. The LCD display will show “0” and
the “Hr” icon.
2. Turn the Dial Wheel (+/-) to adjust from 0-24
to select your desired time interval for the
heater to shut-off automatically. The selected
hour will appear on the LCD display, and then
the timer indicator light will stop blinking in 3
seconds to indicate that the selected timer
is activated. The LCD display will return to
show the preset temperature.
3. To cancel the timer feature, press the Timer
Button ( ) twice within 5 seconds. The
Timer indicator light will go off.
NOTE: The Timer does not work with the Frost
Guard setting.
AUTO SAFETY SHUT OFF
This heater is equipped with a technologically-
advanced safety system that requires the user
to reset the heater if there is a potential overheat
situation. When a potential overheat temperature
is reached, the system will automatically shut the
heater off. It can only resume operation when the
user rests the unit. If the heater shuts off and the
Power Light is fl ashing, please follow the specifi c
reset instructions below:
1. Stand heater upright.
2. Unplug unit from socket and wait 30 minutes.
3. Plug in and turn ON.
NOTE: If the heater is plugged in again and
Power On/Off Button is pressed within the
30-minute cool down period, heater will run at
High Heat (2) setting, but shut down in 2 seconds
with the Power Light fl ashing. Please repeat
the above 3 steps to reset the heater again and
ensure to allow suffi cient time for the thermostat
to cool down.
CLEANING AND MAINTENANCE
• Turn off the unit.
• Remove the plug from the wall socket.
• Wait for the heater to cool down suffi ciently.
• You may clean the outside of the heater with
a damp cloth. DO NOT allow water to come
into the appliance. DO NOT use soap or
chemicals, which may damage the housing.
Allow suffi cient time to dry before plugging
the unit back in the socket.
ENGLISH
Fig.2
A
D
B
C
F
F
G
E
H
H
BFH912
Fig.1
2 3
BFH912-I_09MLM1.indd 4-6BFH912-I_09MLM1.indd 4-6 5/11/09 9:07:50 AM5/11/09 9:07:50 AM
• Clean the air inlet and outlet openings
regularly (with normal use at least twice a
year) with a vacuum cleaner.
FOR U.K. AND IRELAND ONLY
If the plug is not suitable for the socket outlets
in your home, it can be removed and replaced
by a plug of the correct type. Please refer to
“Installation of a plug” below.
Installation of a plug applicable to U.K.
and Ireland only
NOTE: If the terminals in the plug are not
marked or if you are unsure or in doubt about the
installation of the plug please contact a qualifi ed
electrician.
If a 13A 3-pin plug is fi tted, it must be an ASTA
approved plug, conforming to BS1363 standard.
Replacement 13A fuses must be BSI or ASTA
BS1362 approved.
This product is fi tted with a 13A plug complying to
BS1363. If this plug is unsuitable or needs to be
replaced, please note the following: The wires in
the mains lead are coloured as such:
BROWN - LIVE
BLUE - NEUTRAL
Please note that the colour of these mains wires
may not correspond with the colour markings
that identify the terminals in your plug. Please
proceed as follows:
The BROWN coloured wire must be connected to
the terminal, which is marked with the letter “L” or
is coloured RED.
The BLUE coloured wire must be connected to
the terminal, which is marked with the letter “N”
or is coloured BLACK.
DO NOT CONNECT either of these wires to the
earth terminal in the plug. The earth terminal plug
is marked with the letter “E”, or with the earth
symbol , or coloured GREEN, or GREEN and
YELLOW.
GUARANTEE
Please keep your receipt as this will be required
for any claims under this guarantee.
This appliance is guaranteed for 2 years after
your purchase as described in this document.
During this guaranteed period, if in the unlikely
event the appliance no longer functions due to a
design or manufacturing fault, please take it back
to the place of purchase, with your till receipt and
a copy of this guarantee.
The rights and benefi ts under this guarantee
are additional to your statutory rights, which are
not affected by this guarantee. Only Holmes
Products (Europe) Ltd. (“Holmes”) has the right
to change these terms.
Holmes undertakes within the guarantee period
to repair or replace the appliance, or any part of
appliance found to be not working properly free
of charge provided that:
• you promptly notify the place of purchase or
Holmes of the problem; and
• the appliance has not been altered in any
way or subjected to damage, misuse, abuse,
repair or alteration by a person other than a
person authorised by Holmes.
Faults that occur through, improper use, damage,
abuse, use with incorrect voltage, acts of
nature, events beyond the control of Holmes,
repair or alteration by a person other than a
person authorised by Holmes or failure to follow
instructions for use are not covered by this
guarantee. Additionally, normal wear and tear,
including, but not limited to, minor discoloration
and scratches are not covered by this guarantee.
The rights under this guarantee shall only apply
to the original purchaser and shall not extend to
commercial or communal use.
If your appliance includes a country-specifi c
guarantee or warranty insert please refer to
the terms and conditions of such guarantee or
warranty in place of this guarantee or contact
your local authorized dealer for more information.
Waste electrical products
should not be disposed
of with Household waste.
Please recycle where
facilities exist. E-mail us at
enquiriesEurope@jardencs.
com for further recycling and
WEEE information.
Holmes Products (Europe)
Limited
1 Francis Grove
London
SW19 4DT
UK
Troubleshooting for your Heater
Trouble Probable Cause Solution
• Heater Does
Not Turn On.
☛ Manual user reset is activated.
☛ Timer Activated.
☛ Not plugged in properly.
☛ Electrical outlet does not hold
plug in securely.
☛ Thermostat set too low.
☛ Obstruction causing the heater
not to operate.
✔ Follow reset instructions listed in this
manual.
✔ Press the Power Button to turn on the
heater.
✔ Ensure plug is properly inserted. Make
sure electrical outlet and circuit breaker
are working.
✔ Have outlet replaced by a licensed
electrician.
✔ Turn the Dial Wheel (+) to the highest
temperature setting.
✔ Unplug the heater and remove all
obstructions. Position your heater
at least 50cm away from obejcts for
the top, back and sides and at least
200cm distance away from objects for
the front grill.
• Power Light
Is Flashing
or in some
cases,
Heater Turns
On at HIGH
Heat (2)
setting but
then Shuts
Off in 2
seconds with
Power Light
Flashing.
☛ Auto Safety Shut off system
is activated when there is
potential overheat.
✔ Follow Auto Safety Shut Off
instructions to reset the heater and
allow suffi cient time for the heater to
cool down before plugging in again.
• Not Enough
Heat.
☛ Heater is in Low Heat or 1
setting.
☛ Thermostat set to low.
✔ Change setting to 2 (HIGH) heat.
✔ Turn the Dial Wheel (+) to the highest
temperature setting.
• Heater
Cycles ON
And OFF
Frequently.
☛ The thermostat automatically
turns the heater on and off
to maintain selected comfort
level.
✔ To make this occur less frequently
turn the Dial Wheel (+) to the highest
setting.
• Heater Is
Blowing Cold
Air.
☛ Unit is set to Fan Only setting.
☛ When the heater is in
thermostat mode and reaches
the set temperature it will
autmocatically perofrm a 15
second cool down (blowing
cold air) to ensure thermostat
accuracy.
☛ Power Button may have been
pressed to turn off the heater.
✔ Press the 1 (LOW) or 2 (HIGH) heat
setting button.
✔ Raise the temperature higher or
change setting to 2 (HIGH) heat.
✔ Press the Power Button to turn on the
heater.
4 5
BFH912-I_09MLM1.indd 7-8BFH912-I_09MLM1.indd 7-8 5/11/09 9:07:51 AM5/11/09 9:07:51 AM
Product specificaties
| Merk: | Bionaire |
| Categorie: | Verwarming |
| Model: | BFH912 |
Heb je hulp nodig?
Als je hulp nodig hebt met Bionaire BFH912 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Verwarming Bionaire
27 November 2022
27 November 2022
26 November 2022
27 November 2022
26 November 2022
26 November 2022
26 November 2022
27 November 2022
26 November 2022
26 November 2022
Handleiding Verwarming
- Verwarming Bosch
- Verwarming AEG
- Verwarming Junkers
- Verwarming Nefit
- Verwarming Quigg
- Verwarming Remeha
- Verwarming Vaillant
- Verwarming Alde
- Verwarming Atlantic
- Verwarming BeF Home
- Verwarming Blumfeldt
- Verwarming Brink
- Verwarming Danfoss
- Verwarming Dimplex
- Verwarming DIO
- Verwarming Duronic
- Verwarming Duux
- Verwarming Easymaxx
- Verwarming Eberspacher
- Verwarming Etherma
- Verwarming Eurom
- Verwarming FlinQ
- Verwarming Gude
- Verwarming Haceka
- Verwarming Heatstrip
- Verwarming Kompernass
- Verwarming Magma
- Verwarming Mesa Living
- Verwarming Mill
- Verwarming Mio Star
- Verwarming Myson
- Verwarming REMKO
- Verwarming Sonnenkonig
- Verwarming Stiebel Eltron
- Verwarming Suntec
- Verwarming Supra
- Verwarming Thermor
- Verwarming Toolland
- Verwarming Trumatic
- Verwarming Vasco
- Verwarming Wallas
- Verwarming Webasto
- Verwarming Zehnder
- Verwarming Jaga
- Verwarming JML
- Verwarming Eldom
- Verwarming Day
- Verwarming Ecron
- Verwarming Kemper
- Verwarming Zymbo
Nieuwste handleidingen voor Verwarming
5 Oktober 2023
5 Oktober 2023
5 Oktober 2023
5 Oktober 2023
5 Oktober 2023
5 Oktober 2023
5 Oktober 2023
5 Oktober 2023
5 Oktober 2023
5 Oktober 2023