Bionaire BFH420 Handleiding

Bionaire Verwarming BFH420

Lees hieronder de 📖 handleiding in het Nederlandse voor Bionaire BFH420 (34 pagina's) in de categorie Verwarming. Deze handleiding was nuttig voor 50 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/34

P.N. 140483

English 2

Français/French 6

Deutsch/German 10

Español/Spanish 14

Svenska/Swedish 18

Nederlands/Dutch 22

Suomi/Finnish 25

Norsk/Norwegian 29

Polski/Polish 33

EKKHNIKA/Greek 37

РУССКИЙ/Russian 41

Česky/Czech 46

Português/Portuguese 50

Magyar/Hungarian 54

Italiano/Italian 58

Dansk/Danish 63

distributed by Holmes Products (Europe) Ltd., 1 Francis Grove, London SW19 4DT, United Kingdom. Printed in PRC

Importé et distribué par Holmes Products (Europe) Ltd., 1 Francis Grove, London SW19 4DT, United Kingdom.

Imprimé en RPC

MODELS BFH420, BFH430

pure indoor living

2.4 kW

BATHROOM HEATER

Belgium: +32 38 70 86 86

Czech Republic: +420 48 513 03 03

Finland: +358 9 8708 7851

Germany: +49 89 5480195-0

Hungary: +36 1 37 17 970

Latvia +371 7514081

Lebanon: +961 1 81 49 46

Lithuania +370 52 772388

Netherlands: +31 79 36 37 310

Norway: +47 55982770

Poland: +48 23 662 68 01

Slovakia: +421 41 723 47 09

Spain: +34 902 051 045

Sweden: +46 300567370

Turkey: +90 212 210 99 14

United Arab Emirates: +971 42 97 95 52

Holmes Products (Europe) Ltd.

1 Francis Grove

London SW19 4DT

England

Fax: +44 (0)20 8947 8272

Email: enquiriesEurope@jardencs.com

Website address: www.bionaire.com/europe

UK - Free phone Customer Service Helpline – 0800 052 3615

Holmes Products France

1015, Rue du Maréchal Juin

Z.I Vaux - Le - Pénil

77000 Melun – France

Phone: +33 1 64 10 45 80

Fax: +33 1 64 10 02 32

FRANCE - SERVICE CONSOMMATEURS

0 825 85 85 82

INSTRUCTION MANUAL

NOTICE D’UTILISATION

BEDIENUNGSANLEITUNG

MANUAL DE INSTRUCCIONES

MANUAL DE INSTRUÇÕES

MANUALE D'USO

INSTRUCTIEHANDLEIDING

BRUKERHÅNDBOK

KÄYTTÖOPAS

BRUKSANVISNING

BRUGERVEJLEDNING

INSTRUKCJA

ECVEIQIDIO ODGCIXM VQGRGR

РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ

HASZNÁLATI UTASÍTÁS

NÁVOD K OBSLUZE

BFH4420-430 I_IB.qxd:BFH400/410I07MLM1.qxd 3/4/10 10:31 AM Page 1

CONGRATULATIONS!

Your Bionaire™ Heater has been designed using

the latest in technology. With normal care and

maintenance, your Bionaire™ Heater will provide

years of satisfactory performance.

RETAIN THE FOLLOWING FOR FUTURE

REFERENCE.

GENERAL DESCRIPTION

Please see pictures on inside back

page

BFH420 (Fig. 1):

A. Timer

B. Mode Control

C. Thermostat

D. Power Light

E. Carry Handle

F. Wall Bracket

BFH430 (Fig. 2)

A. Mode Button

B. Digital Display

C. Temperature Setting Buttons

D. Carry Handle

E. Wall Bracket

PLEASE READ AND SAVE THESE

IMPORTANT INSTRUCTIONS

When using electrical appliances, basic safety

precautions should always be taken including

the following:

1. Before connecting the heater, check that the

voltage indicated on the rating plate

corresponds to the main voltage in your

home/office.

2. WARNING: In order to avoid overheating, do

not cover the heater ().

3. DO NOT position the heater directly under a

power socket.

4. DO NOT use this heater in the immediate

surroundings of a bath, a shower or a

swimming pool.

5. If the supply cord or plug is damaged, it must

be replaced by the manufacturer or its service

agent or similarly qualified person in order to

avoid hazard. The heater contains no user

serviceable parts. Should the product suffer

damage or breakdown, it must be returned to

the manufacturer or their service agent.

6. Under the environment with electrical fast

transient, the product may malfunction and

require user to reset the product.

7. DO NOT use this heater with a programmer,

timer, separate remote-control system or any

other device that switches the heater on

automatically, since a fire risk exists if the

heater is covered or positioned incorrectly.

8. Only touch the heater with dry hands.

9. DO NOT position where it can be touched by

children, especially the very young.

10. DO NOT use this heater outdoors.

11. Allow a safe area around the heater away from

furniture or other objects; at least 50 cm from

the top and sides and 200 cm at the front.

12. DO NOT use this heater when it is lying on

its side.

13. DO NOT use the heater in rooms with

explosive gas (e.g. petrol) or while using

inflammable glue or solvent (e.g. when

gluing or varnishing parquet floors, PVC etc.).

14. DO NOT insert any objects into the heater.

15. Keep the mains cord at a safe distance from

the main body of the heater.

16. If overheating should occur, the built-in

overheating safety device will switch off the

heater.

17. DO NOT place the cord under a rug.

18. The heater is to be installed so that switches

and other controls cannot be touched by a

person in the bath.

19. Avoid the use of an extension cord because

it may cause the heater to overheat.

20. CAUTION: In order to avoid a hazard due

to inadvertent resetting of the thermal cut-

out, this appliance must not be supplied

through an external switching device, such

as a timer, or connected to a circuit that is

regularly switched on and off by the utility.

21. This appliance is not intended for use by

persons (including children) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless

they have been given supervision or

instruction concerning use of the appliance

by a person responsible for their safety.

Children should be supervised to ensure that

they do not play with the appliance.

BATHROOM USE

• If this heater is going to be used in a

bathroom, or similar room, it must be installed:

a. In such a way that the switches and other

controls cannot be touched by the person

in the bath or shower.

b. Outside the grey shaded areas (Fig. 5 and 6).

• If you are unsure about the installation of this

heater in the bathroom we recommend that

you seek advice from a professional

electrician/installer.

Safety in use

• Extra caution is necessary when the heater is

used near children or when it is left unattended.

• DO NOT insert any objects into the heater.

ENGLISH

BFH420

BFH430

Fig.1

BFH420

Fig.2

BFH430

Fig.3 Fig.4

Fig.5 Fig.6

BFH4420-430 I_IB.qxd:BFH400/410I07MLM1.qxd 3/4/10 10:31 AM Page 4

3. The digital thermostat will memorise the

settings if the heater is turned off using the

"MODE" button (see 6 above). However, if the

heater is unplugged, the digital thermostat

settings will need to be reprogrammed as

detailed from above.

USING THE TIMER

Programmable Timer (For BFH430 only)

The user can programme the heater to come

ON at a preset time OR switch OFF after a

selected period.

Setting the ON timer

1. If the heater is on, press the mode button for

2 seconds to switch the heater off.

2. While the heater is off, hold down both the (+)

and (-) buttons together to select timer. The

display will flash and a red dot will flash on

the right hand side of the digital display.

3. Using either the (+) or (-) buttons, programme

the heater to switch on up to 16 hours later, in

increments of 1 hour.

4. After the preset length of time the heater will

automatically turn on.

Setting the OFF timer

1. Select the Mode and temperature you want

the heater to run in (e.g. Lo-Auto-18˚) as above.

2. While the heater is running hold down both

the (+) and (-) buttons together to select timer.

The display will flash and red dot will flash on

the right hand sode of the digital display.

3. Using either the (+) or (-) buttons programme

the heater to turn off up to 16 hours later in

increments of 1 hour.

4. After setting the time, the digital display will

return to showing the current room

temperature and will illuminate to show the

timer is activated. After the predetermined

length of time has passed, the heater will

automatically switch off.

NOTE:

1. When the timer is set, a red dot will flash

continuously in the right hand side of the

digital display.

2. If the Mode button is pressed when the timer

is actived, the timer function will be

cancelled. To reactivate the timer, it will need

to be reprogrammed as detailed above.

3. It is not possible to set the on and off timers

as part of the same programme.

MOUNTING THE HEATER ON THE

WALL - (Fig. 3 - 4)

1. Use the bracket as a template to mark the

position of the holes to be drilled.

(NOTE: Ensure that the position you choose

is suitable for mounting the heater and that

the area for fixing is away from hidden

electrical cables or pipes.)

2. Drill the holes and fix the bracket to the wall

using wall plugs and screws.

3. Slide the heater correctly onto the bracket

until it "clicks" firmly into place and the heater

is safely held.

FROST GUARD

For BFH420 only

Turn the thermostat to the minimum (furthest

left position). The unit will automatically start

when the temperature drops below 5˚C.

For BFH430 only

Press the 'Mode' button 5 consecutive times

for Anti Frost setting (AF will show in the

digital display). This special setting is

automatically activated when the (AF) mode is

selected. In this mode, the heater is off until

the room's temperature reaches freezing and

the heater automatically turns on HI power.

The heater will cycle ON and OFF as it

maintains the temperature between 5˚C - 8˚C.

AUTO SAFETY SHUT OFF

This heater is equipped with a technologically

advanced safety system that requires the user to

reset the heater if there is a potential overheat

situation. When a potential overheat situation is

reached, (e.g. if the heater was accidentally covered)

the system will automatically switch the heater off.

Operation can only be resumed if the user resets the

heater as detailed below.

To reset the heater

1. Unplug the heater and allow 30 minutes for

the heater to cool down.

2. After 30 minutes plug the heater in and

operate normally.

CLEANING

• Turn the unit to (OFF) position.

• Remove the plug from the wall socket.

• Wait for the heater to cool down sufficiently.

• You may clean the outside of the heater with a

Example - Switch OFF

The time is 1 pm. The heater is running and

you require the heater to switch off at 5 pm

therefore: Set the time at 4 hours.

Example - 4 hours.

Example - Switch ON

The time is 1 pm. You require the heater to

switch on at 5 pm therefore: Set the ON time

at 4 hours.

Example - 4 hours.

• Keep the mains cord at a safe distance from

the main body of the heater.

• Prevent overheating of the heater by keeping

the air inlet and outlet unblocked. DO NOT

hang anything in front of or above the heater.

• If overheating should occur, the built-in

overheating safety device will switch off the

heater.

• DO NOT use aerosols, inflammable

substances or materials sensitive to heat in

the flow of hot air.

Servicing

• Should the heater stop working, first check

the fuse in the plug (UK only) or fuse/circuit

breaker at the distribution board is operating,

before contacting the manufacturer or

service agent.

• If the supply cord or plug is damaged, it must

be replaced by the manufacturer or its

service agent or a similarly qualified person

in order to avoid hazard.

• The heater contains no user serviceable

parts and should the product suffer damage

or breakdown it must be returned to the

manufacturer or their service agent.

HOW TO REMOVE THE HEATER FROM

THE BRACKET

1. Always unplug the heater first.

2. Push the small lug on the bracket

downwards and simultaneously pull the

appliance off the bracket.

OPERATION (FOR BFH420 ONLY)

Setting the power level

Turn the Mode control (B) switch clockwise

= fan position - cool air

1 = low power (1200 watts)

2 = high power (2400 watts)

Setting the temperature level

Use the thermostat to set the desired

temperature level. The thermostat will maintain

the desired temperature level by switching on

and off at intervals.

1. To find the ideal thermostat setting, turn the

thermostat knob (C) clockwise as far as it will

go.

2. When the desired temperature is reached,

slowly turn the thermostat knob anti-clockwise

until the heater turns off.

3. The heater will now automatically retain the

temperature at the required level.

USING THE TIMER (FOR BFH420 ONLY)

Your heater has been equipped with a timer.

When the timer is used, the heater will switch

itself off after a preset time (max. 180 minutes).

Turn the timer control (A) clockwise and set the

number of minutes e.g. 30 = On for 30 minutes.

The pilot light goes on and the appliance

switches on at the preset temperature and

setting. The heater switches off and the pilot

light goes out as soon as the preset time has

elapsed. e.g. if you turn the dial clockwise to 30,

the heater will stay on for 30 minutes and then

switch off.

To switch the timer off:

Slowly turn the timer control anti-clockwise and

select setting.

DIGITAL TEMPERATURE CONTROL

(FOR BFH430 ONLY)

This heater is equipped with a digital thermostat

that allows you to set the precise temperature

that you require. Altematively, use the manual

option to set the heater to run continuously.

1. Press the 'MODE" button (A) once for manual

LOW power. "Lo" (1200W) will show in the

digital display.

2. Press the " MODE" button again for manual

HIGH power. "Hi" (2400W) will show in the

digital display.

3. Press the "MODE" button again for

AUTO/HIGH power. The preset thermostat

temperature will flash for 2 seconds in the

digital display.

4. Press the "MODE" button again for

AUTO/LOW power. The preset thermostat

temperature will flash for 2 seconds in the

digital display (B).

5. To raise or decrease the preset themostat

setting (13ºC-30ºC). scroll up or down using

the (+) or (-) buttons. The digital display will

flash the selected preset temperature for 2

seconds. If the room temperature is below

your selected thermostat temperature the

heater will switch on and the room

temperature will gradually increase until the

preset temperature is reached. The digital

thermostat will now automatically maintain the

heater temperature at the desired level.

6. To shut the unit off at any time, press the

"MODE" button for 2 seconds.

NOTE:

1. If the heater will not switch on in the Auto

mode, please check the room temperature is

not higher than the preset thermostat

temperature.

2. It is normal for the heater to cycle On and Off

as it maintains the selected room temperature. In

Auto mode, when the heater automatically

switches off, the High or Low indicator (depending

on the setting) will flash. To run the heater

continuously select manual High or Low.

BFH4420-430 I_IB.qxd:BFH400/410I07MLM1.qxd 3/4/10 10:31 AM Page 3

Product specificaties

Merk:	Bionaire
Categorie:	Verwarming
Model:	BFH420
Kleur van het product:	Wit
Timer:	Ja
Soort:	Ventilator elektrisch verwarmingstoestel
Vermogen:	1200 W
Instelbare thermostaat:	Ja