BeSafe IZi Modular i-Size Base Handleiding

BeSafe Autostoel IZi Modular i-Size Base

Lees hieronder de 📖 handleiding in het Nederlandse voor BeSafe IZi Modular i-Size Base (66 pagina's) in de categorie Autostoel. Deze handleiding was nuttig voor 67 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/66
j k
l
a
b
c
d
e
f
i
h
g
5
j
1
2
4
3
7
8
click!
1
321
6
2 3
USER MANUAL
UN regulation no. R129
i-Size
72
76
80
84
88
92
96
100
104
108
112
116
120
127
131
135
8
12
16
20
24
28
32
36
40
44
48
52
56
60
64
68
8
! Vital information
• The child seat MUST NOT be installed in a front
passenger seat WITH AN ACTIVATED AIRBAG.
• iZi Modular i-Size base can only be installed in a car
equipped with ISOfix anchorage points.
• For the suitable positions in the car, read the vehicle handbook.
• Read the car list to find out whether your car model is approved
for this seat.
• iZi Modular i-Size base can be used in combination with iZi Go
Modular for stature height 40 - 75 cm, and iZi Modular for stature
height 61 - 105 cm.
• The floor support must always be used. Make sure that the floor
support is fully pushed down until it touches the floor of the
vehicle in front of the seat and that the indicators on the floor
support are always showing green.
• DO NOT attempt to dismantle, modify or add any part to the seat.
Warranty will be void if non-original parts or accessories are used.
• Do not use any aggressive cleaning products; these may harm the
construction material of the seat.
• BeSafe advises that child seats should not be bought or sold
second-hand.
• KEEP this user manual for later use with the seat.
• DO NOT use the seat for longer than 7 years. Due to ageing, the
quality of the material may change.
• If in doubt, consult either the car seat manufacturer or the retailer.
9
10
11
12
13
15
14
rrrt!
click!
click!click!
16
17 18
19
20
click!
2 3
1
1
Thank you for choosing BeSafe iZi Modular i-Size base
! It is important that you read this user manual BEFORE
installing your seat. Incorrect installation could endanger
your child.
!
P
In
2
3
4
10 11
5. When installing in the front seat of the vehicle, adjust the back rest
into an upright position. (12)
6. If your vehicle is not equipped with ISOfix insertion clips, insert
these to make installation easier. (13)
7. ISOfix insertion clips are underneath the base.
8. When the base is lifted the floor support should fall downwards
from underneath the base. Do this outside the car. (14)
9. Push down one of the grey ISOfix releases on top of the base. The
ISOfix connectors will appear at the back of the base. Pull the ISOfix
connectors fully out. (15)
10. Position the base on the vehicle seat. Click the ISOfix connectors on
to the ISOfix points on the vehicle seat. Make sure that both ISOfix
indicators are green. (16)
11. During installation, you can prevent the ISOfix connectors from
sliding in, by pushing at least on one side on the marked area in
front of the grey isofix release switch. (16)
12. Push the base against the backrest of the vehicle seat until it is
firmly in place. (17)
13. Remove the yellow cap from the floor support. The alarm sound will
stop when the seat is installed correctly with the floor support in
contact with the floor of the vehicle. (18)
14. Adjust the floor support, so it is in contact with the floor of the
vehicle. (19)
15. The height indicator of the floor support shows green when the
floor support is in contact with the floor. (20)
16. The alarm sound stops when the floor support indicators show
green and it is in contact with the floor. (20)
• The child seat MUST NOT be installed in a front
passenger seat WITH AN ACTIVATED AIRBAG.
• The floor support must always be used. Make sure that
the floor support is fully pushed down.
• When used in combination with iZi Modular the front brace must
be fitted on the base.
• Make sure the indicators are green before you drive.
! Warning: potential misuse
Guarantee
Removal of the base from the vehicle
• Should this product prove faulty within 24 months of purchase
due to materials or manufacturing fault, except covers and harness
straps, please return it to the original place of purchase.
• The guarantee is only valid when you use your seat appropriately
and with care. Please contact your retailer, they will decide if the
seat will be returned to the manufacturer for repair. Replacement
or return cannot be claimed. The guarantee is not extended
through repair.
• The guarantee expires: when there is no receipt, when defects are
caused by incorrect and improper use, when defects are caused by
abuse, misuse or negligence.
1. To remove the base from the vehicle, you have to slide the
central grey ISOfix release switch towards the front. Both isofix
connectors will release from the vehicle
2. If removal is dicult, it can help to push the base towards the
backrest of the vehicle, while pulling the ISOfix release switch.


Product specificaties

Merk: BeSafe
Categorie: Autostoel
Model: IZi Modular i-Size Base

Heb je hulp nodig?

Als je hulp nodig hebt met BeSafe IZi Modular i-Size Base stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Autostoel BeSafe

Handleiding Autostoel

Nieuwste handleidingen voor Autostoel