BeSafe Stretch B Handleiding
Lees hieronder de 📖 handleiding in het Nederlandse voor BeSafe Stretch B (140 pagina's) in de categorie Autostoel. Deze handleiding was nuttig voor 59 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/140
157
168
177
186
195
204
214
225
234
243
251
258
276
285
10
20
29
38
47
58
68
78
88
98
108
118
128
137
147
Click!
q
l
m
o
p
k
d
e
b
j
i
h
g
f
r
s
t
u
a
c
n
v
w
x
62
7
85
1
3 4
5 positions
1
2
y
SCAN ME
FOR HELP
?
USER MANUAL
Stature height: 40 - 125 cm
Max. weight: 36 kg
Rear facing
Age approx.: 0 - 7 yrs
UN regulation no. R129
10 11
! Vital information
• The child seat MUST NOT be installed in a front seat WITH
AN ACTIVATED AIRBAG or on a vehicle seat position with a
belt airbag.
• The car list provided for this seat can serve as a guideline for which
positions in your vehicle the seat can fit. But you must always check your
vehicle manual if child seats of this type are allowed to be installed. The
vehicle manual is the leading guideline and must always be followed.
• This seat must be installed rear facing with a 3-point vehicle belt,
approved according to UN/ECE Regulation No.16 or other equivalent
standards.
• The floor support must always be used. Make sure that the floor support
is fully pushed down until it touches the floor of the vehicle in front of
the seat and that the indicators on the floor support are always showing
green.
• The harness straps must always be locked when the child is in the seat.
• The harness straps must be tightened without slack and not twisted.
• Make sure to tighten the harness extremely well, so that you can no
longer make a horizontal fold in the belts. When you tighten the harness,
make sure that the child is positioned well against the backrest.
• The shoulder pads contain magnets. Magnets can influence electronic
equipment such as pacemakers or other medical devices.
• Protect any part of the child’s body which is exposed to the sun.
• Always dress your child in a thin layer of clothes to avoid direct contact
between harness belts and skin. Avoid puy clothes since this prevents
being able to tighten the belts fully.
• We recommend to use the baby shell only in the most reclined position till
a stature height of 87 cm.
• Remove the baby shell when the child is taller than 87 cm.
• You must stop using this seat and change to the next suitable seat when
ONE of these conditions is met: 1) The child is taller than 125 cm; 2)
The child incl. clothes weighs more than 36 kg; 3) The shoulder height
exceeds the highest position of the shoulder belts; 4) The top of the ears
is above the highest point of the headrest in the highest position.
• Replace the seat if it has been in a collision where the speed was 10
km/h and above or if there is a suspicion that the seat has been damaged
! It is important that you read this user manual BEFORE
installing your seat. Incorrect installation could endanger your
child.
Thank you for choosing BeSafe Stretch B
SIP+
9
10
11 12 15
17
16
13
14 18
5 positions
10 positions
Click! Click!
1
2
12 13
Components
Preparing the child seat for installation
Preparing the vehicle for installation on the back seat
Preparing the vehicle for installation on the
passenger seat
1. The front brace is delivered as a separate part and must be mounted to
the seat before using the seat in a vehicle. Once installed, the front brace
can only be taken o with the correct tools.
2. To mount the front brace: Keep the front brace handle pushed in while
sliding both tubes into the openings in the seat base on both sides. Slide
them all the way in. (2)
3. Decide with how much leg space you want to install the seat by adjusting
the position of the front brace. To do so, push the front brace handle in
and slide the front brace in or out and let it click into place. (2)
4. Tip: It’s easiest to adjust the front brace position already outside the
vehicle.
1. Bring the backrest of the back seat into upright position (if applicable to
your car).
2. To give yourself space for the installation, move the front seat forward as
far as possible and put it into upright position if needed.
3. If your vehicle is equipped with lower tether anchorage points, you don’t
need further preparations and can start with installing the child seat.
Check your vehicle manual to ensure that the anchorages are allowed to
be used with lower tethers. (3)
1. Adjust the backrest of the front seat into an upright position.
2. ALWAYS deactivate the front airbag. If this is not possible in your vehicle,
you cannot install this seat on the front seat.
3. Move the front seat and/or adjust the front brace position, so that the
back of the child seat will be in contact with the dashboard. If having
contact is not possible, then you should move the front seat as far back
as possible, so that you have a preferable minimum distance of 25 cm
between child seat and dashboard.
4. If your vehicle is equipped with lower tether anchorage points, you don’t
need further preparations and can start with installing the child seat.
Check your vehicle manual to ensure that the anchorages are allowed to
be used with lower tethers.
5. Move the floor support away from the seat and upwards until it locks into
the usage position and does not dangle anymore. (5)
6. For an easier installation once in the car, bring the seat into the most
upright position with the recline handle, and keep the floor support in the
shortest position.
Headrest
Baby shell
Front brace
Front brace handle
User manual pocket
SIP+
Belt guider (2x)
Floor support
Floor support adjuster
Floor support indicator
Shoulder pads (2x)
Shoulder belts (2x)
Hip belts (2x)
Harness buckle
Central adjuster button
Central adjuster strap
Lower tether (2x)
Lower tether release button (2x)
Lower tether strap (2x)
Lower tether hook (2x)
Headrest handle
Tensioner knob
Recline handle
Tensioner lock-o
Lower tether anchorage points in the vehicle
(1a)
(1b)
(1c)
(1d)
(1e)
(1f)
(1g)
(1h)
(1i)
(1j)
(1k)
(1l)
(1m)
(1n)
(1o)
(1p)
(1q)
(1r)
(1s)
(1t)
(1u)
(1v)
(1w)
(1x)
(1y)
Product specificaties
| Merk: | BeSafe |
| Categorie: | Autostoel |
| Model: | Stretch B |
Heb je hulp nodig?
Als je hulp nodig hebt met BeSafe Stretch B stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Autostoel BeSafe
18 Maart 2024
18 Maart 2024
18 Maart 2024
8 Juli 2023
8 Juli 2023
8 Juli 2023
7 Juli 2023
7 Juli 2023
7 Juli 2023
6 Juli 2023
Handleiding Autostoel
- Autostoel Axkid
- Autostoel Baby Jogger
- Autostoel BabyGO
- Autostoel Be Cool
- Autostoel Bebe Confort
- Autostoel Brevi
- Autostoel Britax
- Autostoel Britax-Romer
- Autostoel Bugaboo
- Autostoel Dometic
- Autostoel Ellermeyer
- Autostoel Fisher Price
- Autostoel Foppapedretti
- Autostoel Giordani
- Autostoel Graco
- Autostoel Hauck
- Autostoel Kiddy
- Autostoel Kinderkraft
- Autostoel Lorelli
- Autostoel Maxi-Cosi
- Autostoel Migo
- Autostoel Nuna
- Autostoel Peg Perego
- Autostoel Recaro
- Autostoel Romer
- Autostoel Safety 1st
- Autostoel Sena
- Autostoel Stokke
- Autostoel Storchenmuhle
- Autostoel Ultimate Speed
- Autostoel Uppababy
- Autostoel X-Adventure
- Autostoel Jane
- Autostoel Joie
- Autostoel Osann
- Autostoel Baninni
- Autostoel Lionelo
- Autostoel Hamron
- Autostoel Chicco
- Autostoel Plebani
- Autostoel Cosatto
- Autostoel Silver Cross
- Autostoel Biltema
- Autostoel Casualplay
- Autostoel Concord
- Autostoel Cybex
- Autostoel Evenflo
- Autostoel Kikka Boo
- Autostoel Mothers Choice
- Autostoel Mountain Buggy
- Autostoel Phil And Teds
- Autostoel Disney
- Autostoel Apramo
- Autostoel Cangaroo
- Autostoel Caretero
- Autostoel Clek
- Autostoel Infasecure
- Autostoel Klippan
- Autostoel Nania
- Autostoel Petex
- Autostoel Renolux
- Autostoel Burigotto
- Autostoel Xadventure
- Autostoel Chipolino
- Autostoel Heyner
- Autostoel Takata
- Autostoel Hipod
- Autostoel Kindercraft
- Autostoel Walser
Nieuwste handleidingen voor Autostoel
16 November 2024
16 November 2024
16 November 2024
16 November 2024
15 November 2024
15 November 2024
14 November 2024
12 November 2024
12 November 2024
12 November 2024