Bellman Babyfoonzender Handleiding

Bellman Beveiliging Babyfoonzender

Lees hieronder de ๐Ÿ“– handleiding in het Nederlandse voor Bellman Babyfoonzender (5 pagina's) in de categorie Beveiliging. Deze handleiding was nuttig voor 45 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/5
Manual
Babyfoonzender
English
Wijkermeerstraat 16
โ—
2131 HA Hoofddorp
T 023-5544011 โ— F 023-555646 โ— TT 023-5571610
E info@multicaresystems.nl โ— I www.multicaresystems.nl
Introduction
The Visit system consists of a number of radio transmitters and receivers. The transmitters
detect different events in the surrounding area and transmit a radio signal to the receivers. The
receivers pick up this signal and provide indications using light, sound and/or vibration.
The transmitter determines what type of light, sound or vibration should be displayed so that the
reason for the indication is evident. Read through the entire user manual first and then start to
install the system.
Getting started
Unpacking, installing and testing the unit
1. Open the battery cover (6). Fit one 9V battery, either a 6LR61 alkaline or 6F22 lithium
type battery, and close the battery cover.
2. Press the Test Button (3). The Visit Baby Cry Transmitter lights up the LED (1) to
indicate that the unit is transmitting a radio signal. The Visit receivers will indicate the
Baby Cry Transmitter.
3. The Visit Baby Cry Transmitter can either be placed on a level surface using the base
supplied or suspended on the wall mount bracket (5) on the screw supplied. A suitable
distance from the child is 0.5-2 m. It should not be placed close enough for the child to
reach it.
Function
General
The BE1490 Visit Baby Cry Transmitter is a radio transmitter within the Visit System for indoor
use, which recognises the sound from a crying baby. The Baby Cry Transmitter is activated by
the built-in microphone and can transmit different signal patterns to the receivers in the Visit
System. The sensitivity can be controlled via the sound sensitivity switch (4) and the delay time
before the Baby Cry Transmitter transmits radio signals can be controlled via the delay switches
(7).
3 = On, high sensitivity
2 = On, normal sensitivity
1 = On, low sensitivity
0 = Off
Radio key
On delivery all Bellman Visit units are tuned to the same Radio Key. If you have a neighbour with
a similar system, you can change to different Radio Keys so that you do not affect each otherรทs
systems.
If you use the Radio Key Switch (8) to change the Radio Key on this transmitter, you must also
change all other units in your Visit System to the same Radio Key. Refer to the user manual for
the relevant unit.
Please note:
All Bellman Visit products within the same system must be tuned to the same Radio
Key in order to operate as a group.


Product specificaties

Merk: Bellman
Categorie: Beveiliging
Model: Babyfoonzender

Heb je hulp nodig?

Als je hulp nodig hebt met Bellman Babyfoonzender stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Beveiliging Bellman

Handleiding Beveiliging

Nieuwste handleidingen voor Beveiliging